10 11
• Once the product has less than 20% battery remaining, the red LED
indicator will come on.
• The control on the in-line microphone on the cable allows for play,
pause, call, answer, and call ending.
• Power on: When they are powered off, press and hold the power
button for 2 seconds until the blue LED flashes and you hear the power
up tone accordingly.
• Power off: When they are powered on, press and hold the power
button for 3 seconds until the blue LED flashes and you hear the power
down tone accordingly.
• Volume Adjustment: When listening to music or taking a call,
holding the volume dial forward (volume +) will increase the volume
until you reach the maximum and holding the volume dial backward
(volume -) will decrease the volume until you reach the minimum.
• Pause/Play: When playing music, press the pause/play switch one
time to pause and one more time to resume playing.
• Previous/Next: When playing music, press the Next dial one time to
go to the next song or press the Previous dial once to go back one song.
4. If a password is required to confirm, it will be 0000 (zero zero
zero zero).
5. Once the pairing is successful the blue LED will flash several times
to confirm.
6. If the pairing is unsuccessful please turn off the headphones and
repeat steps 1 through 5.
USING THE HEADPHONES
• Since these are going to be used by your child or children, it
is STRONGLY recommended that you use your device’s built-in
volume limiter and restrict the maximum volume allowed. Turn the
headphones to full volume using the switch on the bottom of the
headphone. Then, on the device limit the volume accordingly. You can
consult with your device’s user manual or do a quick web query to
locate the volume limit setting. Volume limiting on the device may only
affect the Untangled Pro in wired mode.
• Please be sure to correctly wear the headphones as well. The L
should go on the left ear and the R should go on the right ear.
• If you need to clean the product, please use a dry and soft cloth.
