LIMIT 500 Bedienungsanleitung
Operating manual
500
Digital Multimeter
Fig 1. Voltage measurement
DC and AC
Fig 2. Current measurement AC
Fig 3. Diode test
Continuity test
Resistance
Fig 4. Replacing battery
Fig 5. Replacing battery
500
Illustrations & Tables
1
DC Voltage
Range Resolution Accuracy Overload
Protection
200mV 0.1mV 250V AC
2V 1mV ±(0,5%+1)
20V 10mV 1000V AC
200V 100mV
1000V 1V ±(0,8%+2)
AC Voltage
Range Resolution Accuracy Overload
Protection
2V 10mV
20V 10V ±(0.8%+3) 1000V AC
200V 100V
1000V 1V ±(1.2%+3)
DC Current
Range Resolution Accuracy Overload
Protection
2mA 1μA ±(0.8%+1) CE Version:Fuse 0.5A,
200mA 0.1mA ±(1.5%+1)
250V, fast type, 5x20mm
20mA 10mA ±(2%+5) Un-Fused
Diodes Test
Range Resolution Overload Protection
1mV 250V AC
AC Current
Range Resolution Accuracy Overload
Protection
2mA 1μA ±(1.0%+3)
CE Version: Fuse 0.5A,
200mA 0.1mA ±(1.8%+3)
250V, fast type, 5x20mm
20mA 10mA ±(3.0%+5)
Resistance
Range Resolution Accuracy Overload
Protection
200Ω0.1Ω±(0.8%+3) + Test Lead
2Ω1ΩShort Circuit Resistence 250V AC
20kΩ10Ω±(0.8%+1)
2kΩ1kΩ
20MΩ10MΩ±(1.0%+2)
Capacitance
Range Resolution Accuracy
2nF 1pF ±(4.0%+3)
200nF 0.1nF
100μF 0.1μF ±(5.0%+4) When it is > 40μF: the
obtained reading is only for reference
Temperature
Range Resolution Accuracy
-40°~0°C ± (3%+3)
°C 1°C 0~400°C ± (1%+3)
400~1000°C ± 2.5%
500
2
Transistor Test
Range Resolution Accuracy ±(a%reading + b digits)
hFE 1ß Vce≈3V Ibo≈10μA 1000ßMAX
Frequency (UT58C only)
Range Resolution Accuracy Overload
Protection
2kHz 1Hz
20Hz 10Hz ± (1.5%+5) 250V AC
Remarks
• 100mVrms < input amplitude < 30Vrms
3
Tabels
500
4
Language page
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-12
Svenska . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-19
Norsk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20-26
Dansk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27-34
Suomi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35-41
Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42-50
Nederlands . . . . . . . . . . . . . . . . . . . . . . . . . . . .51-58
Français
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59-66
Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67-74
Español
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75-82
Português
. . . . . . . . . . . . . . . . . . . . . . . . . . . .83-90
Polska . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91-98
Eesti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99-104
Latviski . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105-112
Lietuvi
Š
kai . . . . . . . . . . . . . . . . . . . . . . . .
113-120
PyÔÔÍËÌ . . . . . . . . . . . . . . . . . . . . . . . . . . . .121-127
Language Contents
5
English
Overview
General specification
Safety information
Voltage DC and AC
Current DC and AC
Resistance
Temperature
Diodes test
Continuity test
Capacitance
Transistor test
Frequency
Battery
Fuses
Contents
Overview
This Operating Manual covers information on safety and cautions.
Please read the relevant information carefully and observe all the
Warnings and Notes strictly.
Limit 500 are 3 1/2 digits instrument for professional use. Display
have large digits and also shows correct test leads terminals and
rotary switch position, makes this instrument easy to handle for the user.
General Specifications
Measuring range and accuracy see page 1-3.
•Fused Protection for VΩmA Input Terminal: 0,5A, 250V fast type,
5x20 mm.
•20A Terminal: Un-fused.
•Range: Manual ranging
•Maximum Display: Display: 1999 or 31/2 digits.
•Measurement Speed: Updates 2-3 times /second.
•Temperature: Operating: 0°C~40°C (32°F~104°F).
Storage: -10°C~50°C (14°F~122°F).
•
Battery Type: One piece of 9V Battery NEDA 1604 or 6F22 or 006P.
•Safety/Compliances: IEC61010 CAT II 1000V, CAT III 600 V over
voltage and double insulation standard.
•Certification:
Safety Information
This Meter complies with the standards IEC61010: in pollution
degree 2, over voltage category (CAT II 1000V, CAT III 600V) and
double insulation.
Warning
To avoid possible electric shock or personal injury, and to
avoid possible damage to the Meter or to the equipment under
test, adhere to the following rules:
6
500
7
English
•Before using the Meter inspect the case. Do not use the Meter if it
is damaged or the case (or part of the case) is removed. Look for
cracks or missing plastics. Pay attention to the insulation around
the connectors.
•Inspect the test leads for damages insulation or exposed metal.
Check the test leads for continuity.
•Do not apply more than the rated voltage, as marked on the
Meter, between the terminals or between any terminal and the
grounding.
•The rotary switch should be placed in the right position and no
any changeover of range shall be made during measurement is
conducted to prevent damage of the Meter.
•When the Meter working at an effective voltage over 60V in DC or
42V rms in AC, special care should be taken for there is danger of
electric shock.
•Do not use or store the Meter in an environment of high tempera-
ture; humidity, explosive, inflammable and strong magnetic fields.
The performance of the Meter may deteriorate after dampened.
•
When using the test leads, keep your fingers behind the finger guards.
•Disconnect circuit power and discharge all high-voltage capacitors
before testing resistance, continuity, diodes and current.
•Before measuring current, check the Meter fuses and turn off
power to circuit before connecting the Meter to the circuit.
•Replace the battery as soon as the battery indicator appears. Whit
to low battery, the Meter might produce false readings that can
lead to electric shock and personal injury.
Functional buttons
Hold • ON/OFF switch.
• ON/OFF for hold function.
Blue • H shows on the display when value is hold.
8
500
Voltage measurement DC and AC (see fig 1)
1. Insert the red test lead into the HzVΩterminal and the black test
lead into the COM terminal.
2. Set the rotary switch to an appropriate measurement position in
V--range for DC or V~ for AC. When the value is unknown always
start from the max range 1000 V.
3. Connect the test leads across with the object being measured.
The measured value shows on the display.
Note
•Displays 1 selected range is overload; it is required to select a
higher range in order to obtain a correct reading.
•
In each range, the Meter has an input impedance of approx.10MΩ.
This loading effect can cause measurement errors in high impe
dance circuits. If the circuit impedance is less than or equal to
10kΩ, the error is negligible (0.1% or less).
Current measurement DC and AC (see fig 2)
Warning
Never attempt an in-circuit current measurement where the voltage
between terminals and ground is greater than 250 V.
If the fuse burns out during measurement, the Meter may be dama-
ged or the operator himself may be hurt. Use proper terminals, func-
tion, and range for the measurement.
When the testing leads are connect-ed to the current terminals, do
not parallel them across any circuit.
Measuring time for current should be less than 10 sec and interval
between measurement should be at least 15 minutes.
To measure current, connect as follows:
1.
Turn off power to the circuit. Discharge all high-voltage capacitors.
2. Insert the red test lead into the A or mA terminal and the black
test lead into the COM terminal.
Inhaltsverzeichnis
Andere LIMIT Multimeter Handbücher
LIMIT
LIMIT 610 Bedienungsanleitung
LIMIT
LIMIT DM 620 Bedienungsanleitung
LIMIT
LIMIT 610 Bedienungsanleitung
LIMIT
LIMIT 500 Auto Bedienungsanleitung
LIMIT
LIMIT 500 Auto Bedienungsanleitung
LIMIT
LIMIT 23 Bedienungsanleitung
LIMIT
LIMIT 210 Bedienungsanleitung
LIMIT
LIMIT Limit 21 Bedienungsanleitung
LIMIT
LIMIT 300 Bedienungsanleitung
LIMIT
LIMIT 400 Bedienungsanleitung
Beliebte Multimeter Handbücher anderer Marken
Gossen MetraWatt
Gossen MetraWatt METRAmax 6 Bedienungsanleitung
PeakTech
PeakTech 4000 Gebrauchs- und Pflegehandbuch
YOKOGAWA
YOKOGAWA 90050B Bedienungsanleitung
Gossen MetraWatt
Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung
Fluke
Fluke 8846A Bedienungs- und Wartungshandbuch
Tempo Communications
Tempo Communications MM200 Bedienungsanleitung
