Linak DESKLINE DL4S Bedienungsanleitung

Page 1 of 24

LINAK.COM/DESKLINE

DL4S system with CBD6S

User manual

Page 2 of 24

Contents

Preface ..............................................................................................................................................3

Valid for..............................................................................................................................................4

Important information .....................................................................................................................5

Safety instructions.......................................................................................................................... 5

General ....................................................................................................................................... 5

Before installation, reinstallation or troubleshooting ..................................................................... 6

Before start-up ............................................................................................................................ 6

During operation.......................................................................................................................... 6

Misc. ........................................................................................................................................... 6

Only for EU markets........................................................................................................................ 7

Only for Non EU markets ............................................................................................................... 7

Misuse ............................................................................................................................................ 7

Repairs ............................................................................................................................................ 8

Declaration of incorporation of partly completed machinery .................................................. 8

Misc. on the DESKLINE®DL4S system ........................................................................................... 9

Warranty....................................................................................................................................... 9

Maintenance................................................................................................................................. 9

Service of double-insulated products ............................................................................................. 9

ETL-markering ................................................................................................................................ 10

Description of the DESKLINE® DL4S system................................................................................ 11

Mounting guidelines for the DL4S............................................................................................... 12

Mounting guidelines CBD6S (SMPS)............................................................................................ 13

Anti-CollisionTM............................................................................................................................... 14

Accessories .................................................................................................................................... 15

Disposal of LINAK’s products........................................................................................................ 16

Labels ........................................................................................................................................... 17

Drawing appendix.......................................................................................................................... 18

Declaration of conformity............................................................................................................. 21

Addresses........................................................................................................................................ 24

Page 3 of 24

Preface

Dear User,

We are delighted that you have chosen a product from LINAK®.

LINAK systems are high-tech products based on many years of experience in the manufacture and development

of actuators, electric control boxes, controls and chargers.

This User Manual does not address the end-user. It is intended as a source of information for the manufacturer

of the equipment or system only, and it will tell you how to install, use and maintain your LINAK electronics. It

is the responsibility of the manufacturer of the end-use product to provide a User Manual where relevant safety

information from this manual is passed on to the end-user.

We are sure that your LINAK product/system will give you many years of problem-free operation.

Before our products leave the factory they undergo full function and quality testing. Should you nevertheless

experience problems with your LINAK product/system, you are always welcome to contact your local dealer.

LINAK subsidiaries and some distributors situated all over the world have authorised service centres, which are

always ready to help you.

LINAK provides a limited warranty on its products. This warranty is, however, subject to correct use in

accordance with the speciﬁcations, maintenance being done correctly, and any repairs being carried out at a

service centre, which is authorised to repair LINAK products. Changes in installation and use of LINAK products/

systems can affect their operation and durability. The products are not to be opened by unauthorised personnel.

You can review the full terms of the LINAK warranty on the LINAK website www.linak.com/warranty.

The User Manual has been written based on our present technical knowledge. We are constantly working on

updating the information and we therefore reserve the right to carry out technical modiﬁcations.

LINAK A/S

Page 4 of 24

Valid for:

This User Manual is valid for the following products:

(See the ﬁrst 3 - 5 characters on the label)

Columns: 1 single DL4S or 2 in parallel

Control boxes: CBD6S 200W, CBD6S 300W

Controls: DP1U / DPF1M (if memory function is required)

DPT / DPF1C / DP1CS (if memory function and display is required) or

DPA / DPB / DPH / DP1K / DP1V / DPF1K (if only up/down is required)

DPF1D (If display is required)

Page 5 of 24

Safety instruction

General

Important information

Important information on LINAK®products can be found under the following

headings:

Warning!

Failure to comply with these instructions may result in accidents involving

serious personal injury.

Failing to follow these instructions can result in the product being damaged

or being destroyed.

Safe use of the system is possible only when the operating instructions are read

completely and the instructions contained are strictly observed.

Failure to comply with instructions marked with the ”NOTE” symbol may result in

serious damage to the system or one of its components.

It is important for everyone who is to connect, install, or use the systems to

have the necessary information and access to this User Manual. Follow the

instructions for mounting – risk of injury if these instructions are not followed.

The appliance is not intended for use by young children or inﬁrm persons

without supervision.

If there is visible damage on the product it must not be installed.

Note that during construction of applications, in which the actuator is to

be fitted, there must be no possibility of personal injury, for example the

squeezing of fingers or arms.

Assure free space for movement of application in both directions to avoid

blockade.

Page 6 of 24

Before installation, re-installation, or troubleshooting:

•Stop the DL4S

•Pull out the mains plug.

•Relieve the DL4S of any loads, which may be released during the work.

Before start-up:

•Make sure that the system has been installed as instructed in this User Manual.

•Make sure that the voltage of the control box is correct before the system is

connected to the mains.

•System connection.The individual parts must be connected before the control box

is connected to the mains. See the User Manual for LINAK actuators, if necessary.

During operation

•If the control box makes unusual noise or smells, switch off the mains voltage

immediately.

•Take care that the cables are not damaged.

•Unplug the mains cable on mobile equipment before it is moved.

•The products must only be used in an environment, that corresponds to their IP

protection.

Misc.

The actuator system has a sound level below 55dB(A) in typical applications.

Updated manuals and declarations can always be found here:

www.linak.com/deskline

Page 7 of 24

Only for EU markets

This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have given supervision or instruction

concerning use of the appliance in a safe way and understand the hazards

involved.

Children shall not play with the appliance. Cleaning and user maintenance

shall not be made by children without supervision.

Only for Non EU markets

Persons who do not have the necessary experience or knowledge of the

product/products must not use the product/products. Besides, persons with

reduced physical, sensory or mental abilities must not use the product/

products, unless they are under surveillance or they have been thoroughly

instructed in the use of the apparatus by a person who is responsible for the

safety of these persons.

Moreover, children must be under surveillance to ensure that they do not play

with the product.

Misuse

Do not overload the actuators – this can cause danger of personal injury and

damage to the system.

Do not use the actuator system for lifting persons. Do not sit or stand on a

table while operating – risk of personal injury.

Do not use the system in environments other than the intended indoor use

Page 8 of 24

Repairs

In order to avoid the risk of malfunction, all DESKLINE®repairs must only be carried out by authorised LINAK service centres or

repairers, as special tools must be used and special gaskets must be ﬁtted. Products under warranty must also be returned to

authorised LINAK service centres.

Further information on DESKLINE warranty can be found on the LINAK website www.linak.com/warranty.

Warning!

If any of the DESKLINE®products are opened, there will be a risk of subsequent malfunction.

Warning!

The DESKLINE®systems do not withstand cutting oil.

DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY

LINAK A/S

Smedevænget 8

DK -6430 Nordborg

Herewith declares that LINAK DESKLINE®products as characterized by the following models and types:

Control Boxes CBD6S

Linear ActuatorsDB5, DB6, DB7, DB9, DB12, DB14, DB16, LA23, LA31

Lifting ColumnsDL1A, DL2, DL4S, DL5, DL6, DL7, DL8, DL9, DL10, DL11, DL12, DL14, DL15,

DL16,DL17, DL19, BASE1

Desk PanelsDPA, DPB, DPH, DPF, DPG1K, DPG1M, DPG1B, DPG1C, DPT, DP1, DP1CS,

DP1K, DP1V, DP1U

RF ControlsHB10RF,HB20RF, RFT, RFRL

Accessories BA001, SLS, Kick & Click

comply with the following parts of the Machinery Directive 2006/42/EC,ANNEX I,Essential health and

safety requirements relating to the design and construction of machinery:

1.5.1 Electricity supply

The relevant technical documentation is compiled in accordance with part B of Annex VII and that this

documentation or part hereof will be transmitted by post or electronically to a reasoned request by the

national authorities.

This partly completed machinery must not be put into service until the final machinery into

which it is to be incorporated has been declared in conformity with the provisions of the

Machinery Directive 2006/42/EC where appropriate.

Nordborg, 2017-12-08

LINAK A/S

John Kling, B.Sc.E.E.

Certification and Regulatory Affairs

Authorized to compile the relevant technical documentation

Original Declaration

Page 9 of 24

Misc. on the DESKLINE®DL4S system

This system is a DESKLINE system developed for desks and for indoor use in ofﬁces. Do not use it in industrial kitchens or in

other enviroments that have to be cleaned with aggressive detergents.

Do not bolt the legs to the ﬂoor so that free movement is prevented. This could cause serious damage to the legs in fault

situations.

Warranty

This DESKLINE product is subject to warranty pursuant to the terms of LINAK DESKLINE Warranty Paper, available on the LINAK

website www.linak.com/warranty.

Maintenance

Clean dust and dirt on the outside of the system at appropriate intervals and inspect them for damage and breaks.

Inspect the connections, cables, and plugs and check for correct functioning as well as ﬁxing points.

Service of double-insulated products:

Class II

A Class II or double insulated electrical appliance is one which has been designed in such a way that it does not require a

safety connection to electrical earth (US: ground).

The basic requirement is that no single failure can result in dangerous voltage becoming exposed so that it might cause an

electric shock and that this is achieved without relying on an earthed metal casing. This is usually achieved at least in part by

having two layers of insulating material surrounding live parts or by using reinforced insulation.

There is no earthing/grounding means provided on the product, and no earthing/grounding means is to be added to the

product.

In Europe, a double insulated appliance must be labelled “Class II”, “double insulated” or bear the double insulation symbol (a

square inside another square).

Servicing a double-insulated product requires extreme care and knowledge of the system, and is to be done only by qualiﬁed

service personnel. Replacement parts for a double-insulated product must be identical to the parts they replace.

The cleaners and disinfectants must not be highly alkaline or acidic (pH value 6-8).

Page 10 of 24

C/N 4008003

Conforms to UL962

Cert. to CSA Std. C22.2 No. 68-09

ETL Recognized Component mark for Canada and United States

C/N 4008004

Conforms to UL962

Cert. to CSA Std. C22.2 No. 68-09

ETL Recognized Component mark for Canada and United States

C/N 4008005

Conforms to UL962

Cert. to CSA Std. C22.2 No. 68-09

ETL Recognized Component mark for Canada and United States

C/N 4008671

Conforms to UL962

Cert. to CSA Std. C22.2 No. 68-09

ETL Recognized Component mark for Canada and United States

C/N 4009507

Conforms to UL962

Cert. to CSA Std. C22.2 No. 68-09

ETL Recognized Component mark for Canada and United States

ETL-marking

Due to space limitations, the complete ETL-marking demands are not represented on the marking plates.

The full ETL Recognized Component markings are shown here.

C/N 120690

Conforms to UL962

Cert. to CSA Std. C22.2 No. 68-09

ETL Recognized Component mark for Canada and United

States

C/N 9901916

Conforms to UL962

Cert. to CSA Std. C22.2 No. 68-09

ETL Recognized Component mark for Canada and United

States

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Linak Hubsäule Handbücher

Linak

Linak DL8 Bedienungsanleitung

Linak

Linak BL1 Bedienungsanleitung

Linak

Linak TECHLINE ELEVATE - LC3 IC Bedienungsanleitung

Linak

Linak Deskline DL20 IC Bedienungsanleitung

Linak

Linak DESKLINE DL5 Bedienungsanleitung

Linak

Linak CBD6S 200W Bedienungsanleitung

Linak

Linak DESKLINE DL2 Bedienungsanleitung

Linak

Linak DESKLINE DL5 IC Bedienungsanleitung

Linak

Linak DL8IC Bedienungsanleitung

Linak

Linak MEDLINE CARELINE Service readout Bedienungsanleitung

Linak

Linak DESKLINE DL1A Bedienungsanleitung

Linak

Linak DESKLINE DL1A Bedienungsanleitung

Linak

Linak DESKLINE DL20 Bedienungsanleitung

Linak

Linak DL15 Bedienungsanleitung

Linak

Linak DESKLINE DL18 IC Bedienungsanleitung

Linak

Linak DESKLINE DL18 Bedienungsanleitung

Linak

Linak DL16 Bedienungsanleitung

Linak

Linak DESKLINE DL2 Bedienungsanleitung

Linak

Linak DL8IC Bedienungsanleitung

Beliebte Hubsäule Handbücher anderer Marken

progressive automations

progressive automations FLT-03-2-2 Bedienungsanleitung

Clemens Technologies

Clemens Technologies S-2R Bedienungsanleitung

Ewellix

Ewellix CPSM Bedienungsanleitung

MAHA

MAHA RGA UC Bedienungsanleitung

Ewellix

Ewellix CPMT Bedienungsanleitung

Dhollandia

Dhollandia DH-VO.20.K9 Bedienungsanleitung

GE FineLINE 35 oligo Bedienungsanleitung

Mohawk

Mohawk LMF-12 Technisches Dokument

OMA

OMA 511 Bedienungsanleitung

Rotary

Rotary MCH418 Bedienungsanleitung

progressive automations

progressive automations FLT-06 Bedienungsanleitung

IDEAL

IDEAL MSC-18K-X-236 Handbuch

Ewellix

Ewellix CPMA Series Bedienungsanleitung

Maxima

Maxima ML4030B Bedienungsanleitung

rav

rav RAV241-2-L Bedienungsanleitung

Dhollandia

Dhollandia DH-AR Series Bedienungsanleitung

progressive automations

progressive automations FLT-03-2-1 Bedienungsanleitung

Ravaglioli

Ravaglioli VARKPH370.70LIK/T Bedienungsanleitung