Linak DESKLINE Kick & Click Fixed Bedienungsanleitung

Page 1 of 34

LINAK.COM/DESKLINE

Kick & ClickTM

User manual

Page 2 of 34

Contents

Preface .......................................................................................................................................... 3

Important information ................................................................................................................. 4

Safety instructions........................................................................................................................ 4

Before installation, re-installation or troubleshooting.................................................................. 5

Before start-up .......................................................................................................................... 5

During operation ....................................................................................................................... 5

Misc. ......................................................................................................................................... 5

Only for EU markets ..................................................................................................................... 6

Only for Non EU markets ............................................................................................................. 6

Misuse .......................................................................................................................................... 6

Repairs .......................................................................................................................................... 7

Manufacturer’s declaration.......................................................................................................... 7

Declaration of conformity ........................................................................................................... 8

Misc. on the DESKLINE®system .................................................................................................. 9

Warranty ................................................................................................................................... 9

Maintenance ............................................................................................................................. 9

Description of the DESKLINE® Kick & ClickTM system ............................................................... 10

Kick & ClickTM Fixed.................................................................................................................... 11

Kick & ClickTM Adjustable............................................................................................................ 11

Kick & ClickTM Base .................................................................................................................... 12

Kick & ClickTM 3rd leg kit ............................................................................................................. 13

Assembly ....................................................................................................................................... 14

Kick & ClickTM Adjustable (standard) ........................................................................................... 14

Kick & ClickTM Adjustable (compact)............................................................................................ 15

Assembling the Kick & Click system .......................................................................................... 16

Assembling a three-legged desk ............................................................................................... 19

Mounting the tabletop ................................................................................................................ 20

Disassembly .................................................................................................................................. 22

Accessories ................................................................................................................................... 23

Disposal of LINAK’s products ..................................................................................................... 24

Drawing appendix ........................................................................................................................ 25

Addresses ...................................................................................................................................... 34

Page 3 of 34

Preface

Dear User,

We are delighted that you have chosen a product from LINAK®.

LINAK systems are high-tech products based on many years of experience in the manufacture and development

of actuators, electric control boxes, controls and chargers.

This User Manual does not address the end-user. It is intended as a source of information for the manufacturer

of the equipment or system only, and it will tell you how to install, use and maintain your LINAK electronics.

It is the responsibility of the manufacturer of the end-user product to provide a User Manual where relevant

safety information from this manual is passed on to the end-user.

We are sure that your LINAK product/system will give you many years of problem-free operation.

Before our products leave the factory, they undergo full function and quality testing. Should you nevertheless

experience problems with your LINAK product/system, you are always welcome to contact your local contact.

LINAK subsidiaries and some distributors situated all over the world have authorised service centres, which are

always ready to help you.

LINAK provides a limited warranty on its products. This warranty is, however, subject to correct use in

accordance with the speciﬁcations, maintenance being done correctly, and any repairs being carried out at a

service centre, which is authorised to repair LINAK products. Changes in installation and use of LINAK products/

systems can affect their operation and durability. The products are not to be opened by unauthorised personnel.

You can review the full terms of the LINAK warranty on the LINAK website www.linak.com/warranty.

The User Manual has been written based on our present technical knowledge. We are constantly working on

updating the information and we therefore reserve the right to carry out technical modiﬁcations.

LINAK A/S

Page 4 of 34

Safety instruction

General

Important information

Important information on LINAK®products can be found under the following

headings:

Warning!

Failure to comply with these instructions may result in accidents involving

serious personal injury.

Failing to follow these instructions can result in the product being damaged

or being destroyed.

Safe use of the system is possible only when the operating instructions are read

completely and the instructions contained are strictly observed.

Failure to comply with instructions marked with the ”NOTE” symbol may result in

serious damage to the system or one of its components.

It is important for everyone who is to connect, install, or use the systems to

have the necessary information and access to this User Manual. Follow the

instructions for mounting – there is a risk of injury if these instructions are not

followed.

The appliance is not intended for use by young children or inﬁrm persons

without supervision.

If there is visible damage to the product, do not install it.

Please note that during construction of applications in which the actuator

is to be fitted, there must be no possibility of personal injury, for example

squeezing of fingers or arms.

Assure free space for movement of the application in both directions to avoid

blockades.

Page 5 of 34

Before installation, re-installation, or troubleshooting:

• Stop the columns.

• Switch off the power supply and pull out the mains plug.

• Relieve the columns of any loads, which may be released during the work.

Before start-up:

• Make sure that the system has been installed as instructed in this User Manual.

Describing the motor system.

• Make sure that the voltage of the control box is correct before connecting the

system to the mains.

• System connection. The individual parts must be connected before connecting the

control box to the mains. See the User Manual for LINAK actuators, if necessary.

During operation

• If the control box makes unusual noise or smells, switch off the mains voltage

immediately.

• Duty Cycle: 10%, Max. 2 min./18 min. pause

• Take care that the cables are not damaged.

• Unplug the mains cable on mobile equipment before moving it.

• The products must only be used in an environment, that corresponds to their IP

protection.

Misc.

For further information, installation guidelines etc. for the motor system, please see

the relevant user manual: www.linak.com/deskline.

Updated manuals and declarations can always be found here:

www.linak.com/deskline.

Page 6 of 34

Only for EU markets

This appliance can be used by children aged from aged 8 years and above

and persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or instruction

concerning use of the appliance in a safe way and understand the hazards

involved.

Children shall not play with the appliance. Cleaning and user maintenance

shall not be made by children without supervision.

Only for Non EU markets

Persons who do not have the necessary experience or knowledge of the

product/products must not use the product/products. Besides, persons with

reduced physical, sensory or mental abilities must not use the product/

products, unless they are under surveillance or they have been thoroughly

instructed in the use of the apparatus by a person who is responsible for the

safety of these persons.

Moreover, children must be under surveillance to ensure that they do not

play with the product.

It is the operator’s responsibility to ensure that there is free space for the

application to move without risk for the operator or bystanders before

operating the application.

Misuse

Do not overload the actuators – this can cause danger of personal injury and

damage to the system.

Do not use the actuator system for lifting persons. Do not sit or stand on a

table while operating – risk of personal injury.

Do not use the system in environments other than the intended indoor use

Page 7 of 34

Repairs

In order to avoid the risk of malfunction, all DESKLINE®repairs must only be carried out by authorised LINAK service centres or

repairers, as special tools must be used and special gaskets must be fitted. Products under warranty must also be returned to

authorised LINAK service centres.

Further information on DESKLINE warranty can be found on the LINAK website www.linak.com/warranty.

Warning!

If any of the DESKLINE®products are opened, there will be a risk of subsequent malfunction.

Warning!

The DESKLINE®systems do not withstand cutting oil.

DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY

LINAK A/S

Smedevænget 8

DK -6430 Nordborg

Herewith declares that LINAK DESKLINE®products as characterized by the following models and types:

Control Boxes CBD6S

Linear ActuatorsDB5, DB6, DB7, DB9, DB12, DB14, DB16, LA23, LA31

Lifting ColumnsDL1A, DL2, DL4S, DL5, DL6, DL7, DL8, DL9, DL10, DL11, DL12, DL14, DL15,

DL16,DL17, DL19, BASE1

Desk PanelsDPA, DPB, DPH, DPF, DPG1K, DPG1M, DPG1B, DPG1C, DPT, DP1, DP1CS,

DP1K, DP1V, DP1U

RF ControlsHB10RF,HB20RF, RFT, RFRL

Accessories BA001, SLS, Kick & Click

comply with the following parts of the Machinery Directive 2006/42/EC,ANNEX I,Essential health and

safety requirements relating to the design and construction of machinery:

1.5.1 Electricity supply

The relevant technical documentation is compiled in accordance with part B of Annex VII and that this

documentation or part hereof will be transmitted by post or electronically to a reasoned request by the

national authorities.

This partly completed machinery must not be put into service until the final machinery into

which it is to be incorporated has been declared in conformity with the provisions of the

Machinery Directive 2006/42/EC where appropriate.

Nordborg, 2017-12-08

LINAK A/S

John Kling, B.Sc.E.E.

Certification and Regulatory Affairs

Authorized to compile the relevant technical documentation

Original Declaration

Page 8 of 34

DECLARATION OF CONFORMITY

LINAK A/S

Smedevænget 8

DK - 6430 Nordborg

hereby declares that LINAK Actuator System composed of:

Control Box(s) CBD6SP00020A-309

CBD6S*000*0A-709

(The ‘*’ in the product description can either be a character or a number, thereby defining the variation of the product)

And

Linear Actuator(s) 31, DB4, DB5, DB6, DB7, DB9, DB12, DB14, DB16, LA23 series and / or

Lifting Column(s) DL1A, DL2, DL4, DL5, DL6, DL7, DL8, DL9, DL10, DL11, DL12, DL14, DL15, DL16, DL17, DL19,

BASE1 series

And

Desk Panel(s) DP1C, DP1K, DP1L, DP1V, DP1U, DPA, DPB, DPF, DPG, DPH, DPT, WDPL1 series

complies with EMC Directive: 2014/30/EU according to following standards:

EN 61000-6-1:2007, EN 61000-6-3:2007+A1:2011+AC:2012

complies with Low Voltage Directive 2014/35/EU according to the standard:

EN 60335-1:2012+A11:2014

complies with RoHS2 Directive 2011/65/EU according to the standard:

EN 55581:2012

Additional information:

The system does also comply with the standard: EN 13849-1:2015 SRP/CS Cat. B, PL = b and SRESW PL = b

Note 1: Exempted CBD6S with SW03003007 printed on the label.

Nordborg, 2017-12-08

LINAK A/S

John Kling, B.Sc.E.E.

Certification and Regulatory Affairs

Authorized to compile the relevant technical documentation

Original Declaration

Page 9 of 34

Misc. on the DESKLINE®system

This system is a DESKLINE system developed for desks and for indoor use in ofﬁces. Do not use it in industrial kitchens or in

other environments that have to be cleaned with aggressive detergents.

Warranty

This DESKLINE product is subject to warranty pursuant to the terms of LINAK DESKLINE Warranty Paper, available on the LINAK

website www.linak.com/warranty.

Maintenance

Clean dust and dirt off the outside of the system at appropriate intervals and inspect them for damage and breaks.

Inspect the connections, cables, and plugs and check for correct functioning as well as ﬁxing points.

Page 10 of 34

1: Clamp

2: Kick lock

3: Cantilever

4: Inner rail

5: Outer rail

6: Clips

Description of the DESKLINE®Kick & ClickTM system

The Kick & ClickTM system is the smart and intuitive solution for mounting DESKLIFT™ columns to the tabletop. The solution is

perfect for various ofﬁce desks. The unique feature of Kick & Click is the way of mounting. Click the system together without

using tools and screws, simply clever. Kick & Click is a modular concept compatible with all DESKLINE®columns with motor

housing leaving the design to the desk manufacturer. Kick & Click comes standard in 3 variants:: Kick & Click Adjustable

(standard or compact), Kick & Click Fixed and Kick & Click Base. Additionally, Kick & Click can be used for creating large three-

legged ofﬁce desks by joining a Kick & Click 3rd leg kit with a Kick & Click system.

Kick & ClickTM: names of the different parts

Features for all versions:

• Max. total load (including the tabletop):

- Two-legged desks: 160 kg equally loaded, i.e. 80 kg on each column

- Three-legged desks: 240 kg equally loaded, i.e. 80 kg on each column

• Colour (all metal parts): Available in black (RAL 9005), grey (RAL 9006), or white (RAL 9016)

• Cantilever length: 550 mm

• Oval holes ensure ﬂexibility as regards pre-drilling holes in tabletop

• Central or off-centre placement of columns (T-desk or C-desk)

Kick & ClickTM Fixed:

• Fits desks of 1200 mm (frame width 1140 mm)

• Set-packed or bulk deliveries

• Can be delivered with screws for mounting the tabletop

Kick & ClickTM Adjustable:

• Fits desks

- Standard: from 1400 to 2000 mm (frame width 1340 to 1940 mm)

- Compact: from 1000 to 1300 mm (frame width 940 to 1240 mm)

• Set-packed (both versions) or bulk deliveries (standard version only)

• Can be delivered with screws for mounting the tabletop

Kick & ClickTM Base:

• Base consists of Cantilever (x2), Base (x2), Clamp (x2) and Kick Lock (x2) for a two-legged desk

• Bulk deliveries only

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Linak Rack & Stand Handbücher

Linak

Linak Kick & Click Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung