Lincoln Electric W000315558 Montageanleitung

GAS FLOW PROGRAMMER

RDM PLASMA

SAFETY INSTRUCTIONS FOR USE AND MAINTENANCE

DEVICE No W000315558 - W000315559 - W000315560

EDITION : EN Instructions for use REF: 8695 5535

REVISION : L

DATE : 06-2018 Original instructions

Thank for the trust you have expressed by purchasing this equipment, which

will give you full satisfaction if you follow its instructions for use and

maintenance.

Its design, component specifications and workmanship comply with

applicable European directives.

Please refer to the enclosed CE declaration to identify the directives

applicable to it.

The manufacturer will not be held responsible where items not recommended

by themselves are associated with this product.

For your safety,there follows a non-restrictive list of recommendations or

requirements, many of which appear in the employment code.

Finally we would ask you kindly to inform your supplier of any error which

you may find in this instruction manual.

8695 5535

RDM PLASMA I

CONTENTS

A - IDENTIFICATION.........................................................................................................................1

B - SAFETY INSTRUCTIONS............................................................................................................2

C- DESCRIPTION ..............................................................................................................................3

1 - REMINDER.........................................................................................................................3

2 - NEED FOR A PROGRAMMER...........................................................................................4

3 - DESCRIPTION....................................................................................................................5

4 - OVERALL DIMENSIONS OF THE GAS UNIT ...................................................................6

D - ASSEMBLY AND INSTALLATION..............................................................................................8

1 - RDM CONNECTION DIAGRAM.........................................................................................8

2 - CONNECTIONS..................................................................................................................9

E - OPERATOR’S MANUAL..............................................................................................................10

F - MAINTENANCE............................................................................................................................11

1 - TROUBLESHOOTING CHART...........................................................................................11

2 - SPARE PARTS...................................................................................................................12

PERSONAL NOTES ..........................................................................................................................16

8695 5535

II RDM PLASMA

INFORMATIONS

DISPLAYS AND PRESSURE GAUGES

The measuring devices or displays for voltage, current, speed, pressure, etc., whether analog or digital, should be

considered as indicators

For operating instructions, adjustments, troubleshooting and spare parts see safety instructions for use and

maintenance

ISEE No. GAS SUPPLEMENT 8695 5511

REVISIONS

REVISION B 01/05

DESIGNATION

PAGE

Update

9-19-20

REVISION C 11/05

DESIGNATION

PAGE

OVERALL dimensions OF the GAS UNIT

REVISION D 07/06

DESIGNATION

PAGE

To change logos

REVISION E 09/08

DESIGNATION

PAGE

Complete update + spareparts newoffer

REVISION F 06/10

DESIGNATION

PAGE

Update

D-8 ;F-20

REVISION G 10/10

DESIGNATION

PAGE

Update => Valve unit

REVISION H 01/11

DESIGNATION

PAGE

Spare parts

REVISION I 03/13

DESIGNATION

PAGE

Spare parts

8695 5535

RDM PLASMA III

REVISION J 07/13

DESIGNATION

PAGE

NERTAMATIC Plus

REVISION K 10/15

DESIGNATION

PAGE

Update « Spare parts »

F-13

REVISION L 06/18

DESIGNATION

PAGE

To change logos

8695 5535

IV RDM PLASMA

8695 5535 / L

RDM PLASMA A-1

A - IDENTIFICATION

Please enter the number of your equipment in the following box.

Quote this information in all correspondence.

Manufacturing factory code

Year manufactured

Manufacturing year code

Product type

Product serial no.

8695 5535 / L

B-2 RDM PLASMA

B - SAFETY INSTRUCTIONS

For general safety instructions, please refer to the specific manual supplied with

the equipment.

8695 5535 / L

RDM PLASMA C-3

C- DESCRIPTION

1 - REMINDER

With automatic keyhole plasma welding, any of the following defects may occur if the arc

is switched off suddenly with no precaution:

The plasma jet hole remains.

The hole disappears but the high plasma gas flow and the decreasing intensity leads

to gouging in the metal that is being solidified, with the appearance of blow holes.

These defects are not generally critical in the case of longitudinal welding, as the weld

bead often starts and ends on end plates. But they are not acceptable in circular welding. In

that case, you must use a gas flow programmer, which is used to control the decrease in the

flow of plasma gas for a given welding cycle, in order to eliminate the defects described

above in a reliable and reproducible way.

C- DESCRIPTION 8695 5535 / L

C-4 RDM PLASMA

2 - NEED FOR A PROGRAMMER

AREA 1 = Through jet welding area

AREA 2 = Area where the plasma gas flow associated with appropriate intensity leads to

welding similar to TIG welding (no keyhole).

AREA 3 = Transit area (risk of defects)

The problem of the fading phase consists in moving from area 1 to area 2 without any

defect:

For conventional stainless steel grades up to 4 mm, area 3 is narrow and the switch-off

cycle is easy to create by controlling the plasma gas flow and the welding intensity.

While welding more delicate grades and for thicknesses of 5 mm or more, you need to

control not only the plasma gas flow and the welding intensity during the switch-off phase, but

also the movement of the torch relative to the part, the arc voltage sensing and the filler

material.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lincoln Electric Schweißzubehör Handbücher

Lincoln Electric

Lincoln Electric LN-10 ZIPLINE BOOM PACKAGE Bedienungsanleitung

Lincoln Electric

Lincoln Electric VIKING 2450ADV Series Bedienungsanleitung

Lincoln Electric

Lincoln Electric K4168-1 Water Cooled 20-250-25R Bedienungsanleitung

Lincoln Electric

Lincoln Electric X-Tractor 250FG Bedienungsanleitung

Lincoln Electric

Lincoln Electric MARQUETTE IM10146 Bedienungsanleitung

Lincoln Electric

Lincoln Electric CAN-M568 Bedienungsanleitung

Lincoln Electric

Lincoln Electric Magnum PRO Curve HDE 350 Bedienungsanleitung

Lincoln Electric

Lincoln Electric MC-706 Bedienungsanleitung

Lincoln Electric

Lincoln Electric LN-15 Bedienungsanleitung

Lincoln Electric

Lincoln Electric WELD-PAK 155 Bedienungsanleitung

Lincoln Electric

Lincoln Electric Magnum PRO 250 LX Bedienungsanleitung

Lincoln Electric

Lincoln Electric US-CW245 Bedienungsanleitung

Lincoln Electric

Lincoln Electric K2613-5 Bedienungsanleitung

Lincoln Electric

Lincoln Electric DIX WD 300 Montageanleitung

Lincoln Electric

Lincoln Electric WELDING POWER SOURCES AC-225-S Bedienungsanleitung

Lincoln Electric

Lincoln Electric IM573 Gebrauchs- und Pflegehandbuch

Lincoln Electric

Lincoln Electric Outershield Bedienungsanleitung

Lincoln Electric

Lincoln Electric Weldline Street Art Bedienungsanleitung

Lincoln Electric

Lincoln Electric OMNISHIELD Bedienungsanleitung

Lincoln Electric

Lincoln Electric MAGNUM 550 Bedienungsanleitung

Lincoln Electric

Lincoln Electric K3091-1 Bedienungsanleitung

Lincoln Electric

Lincoln Electric Statiflex 800 Bedienungsanleitung

Lincoln Electric

Lincoln Electric AutoDrive 19 TANDEM Bedienungsanleitung

Lincoln Electric

Lincoln Electric US-M1745-LS Bedienungsanleitung

Beliebte Schweißzubehör Handbücher anderer Marken

Cornwell Tools

Cornwell Tools MMWC1 Bedienungsanleitung

Dohle

Dohle ExOn2A Bedienungsanleitung

Nederman

Nederman Fume Eliminator FE 840/2500/P150 Bedienungsanleitung

3M Speedglas 9100 Series Bedienungsanleitung

Miller Electric

Miller Electric OM-842 Bedienungsanleitung

Miller

Miller A-200 Series Bedienungsanleitung

Abicor Binzel

Abicor Binzel ABIMIG WT Series Bedienungsanleitung

Miller

Miller MIGmatic M-25 Bedienungsanleitung

Tregaskiss

Tregaskiss TOUGH GUN TT3 Reamer Bedienungsanleitung

Abicor Binzel

Abicor Binzel xFUME PRO Bedienungsanleitung

Sealey

Sealey SR20.V2 Bedienungsanleitung

iWeld

iWeld NORED EYE Bedienungsanleitung

Sthor

Sthor 74483 Bedienungsanleitung

Leister

Leister TWINNY T7 Bedienungsanleitung

Miller

Miller I-22 CE Bedienungsanleitung

LAHTI PRO

LAHTI PRO L1540400 Bedienungsanleitung

Tregaskiss

Tregaskiss TOUGH GUN TT4E Bedienungsanleitung

Miller Electric

Miller Electric A1D-4RV Bedienungsanleitung