LINDR CWP 100 GREEN Series Bedienungsanleitung

WATER COOLERS

LINDR

Number 017-2020 REV00 Valid 2020-08-01

INSTRUCTION MANUAL

ENGLISH

IMPORTANT

This manual contains instructions for installation, use and operation of the

appliance. This manual is an integral part of the device. It must be stored in the

vicinity of the device for the entirety of its service life and must be made avai-

lable to the user any time the device is installed, moved, used or maintained.

Read this manual carefully before installing and using the device. It contains

important information necessary to ensure that all operations are done pro-

perly and safely.

WARNING:

Not following instructions may cause injury or

damage the device.

SYMBOLS AND MARKINGS USED IN THE MANUAL:

DANGER:

Risk of injury by electrical current.

NOTE:

This symbol indicates information and re-

commendations for the user.

WARNING:

The cooling system contains ammable coolant

R290 (propane)!

LINDR.CZ s.r.o.

Sadová 132

503 15 Nechanice, Czech Republic

mob.: + 420 775 715 494

tel. : +420 495 447 239

e-mail: info@lindr.cz

web: www.lindr.cz, www.lindr.eu

is manual is a translation of the original Czech manual.

WATER COOLERS

Contents:

1. Introduction

2. Description of the cooler

3. Machine plate

4. General instructions, measures and safety instructions

5. Installation and placement

6. Electrical connection

7. Testing

8. Warranty

9. Description of the device

10. Pouring uid into the tank

11. Beverage supply connection and pressurisation

12. Putting into operation

13. How to work with speed ttings

14. Tap installation

15. Temperature and adjustment

16. Cleaning the condenser

17. Keg coupler assembly

18. Keg tapping and untapping

19. Table of malfunctions

20. Spare parts

21. Sanitation by water

22. Maintenance

23. Inspection before every use

24. Periodic checks

25. Environmental protection

26. Technical data

..................................

1. INTRODUCTION:

Thank you for purchasing this LINDR product.

2. DESCRIPTION OF THE COOLER:

The under counter dispensing machine with

ice bank is primarily intended for cooling be-

verages in kegs. The water in these machines

serves to transfer cold to the beer line and also

as a cold accumulator.

This manual is intended for models:

CWP 100 GREEN LINE

CWP 200 GREEN LINE

CWP 300 GREEN LINE

CWP 200 mobile GREEN LINE

CWP 300 mobile GREEN LINE

CWP 300/k pro mobile GREEN LINE

AS-40 GREEN LINE

AS-80 GREEN LINE

AS-110 GREEN LINE

AS-110 INOX TROPICAL GREEN LINE

AS-160/200 GREEN LINE

AS-160 INOX TROPICAL GREEN LINE

AS-45 GREEN LINE

AS-110 INOX TROPICAL GREEN LINE

AS-160 INOX TROPICAL GREEN LINE

3. MACHINE PLATE:

4. GENERAL INSTRUCTIONS, MEASU-

RES AND SAFETY INSTRUCTIONS:

When using the device, follow basic safety

instructions stated by the manufacturer. The

cooling device is designed for ow-through

cooling of beverages. Any other use is consid

ered impermissible and therefore dangerous.

The supplier is not liable for damage caused

by incorrect use.

DO NOT USE THE DEVICE FOR PURPOSES

OTHER THAN THOSE STATED BY THE MANU-

FACTURER!

General safety principles. Observe the fo-

llowing safety instructions.

The supplier is not liable for damage caused

by activities carried out on this device without

observing the following instructions!

WARNING: Children aged 15 or more and

persons with reduced physical, sensory or

mental capabilities or insucient experien-

ce and knowledge may only use the device

when supervised or instructed in safe use of

the appliance and familiarised with potential

dangers.

WARNING: Children must not be allowed

to play with the appliance. Store all packaging

material out of reach of children (comes with a

plastic bag – suocation hazard).

WARNING: Cleaning and maintenance of

the appliance on the part of the user must not

be done by unsupervised children.

WARNING: Before connecting to main

electrical supply, check that the voltage and

frequency in the mains corresponds to the

data stated on the device.

WARNING: Always make sure that the soc-

ket you intend to plug the cooler into meets

the specications on the machine plate (volt-

age, frequency, input power).

WARNING: Before performing operations

on the device such as cleaning or maintenan-

ce, ALWAYS disconnect the device from power

supply: set the thermostat to „O“ position and

unplug the appliance from the socket.

WATER COOLERS

WARNING: Never place tools or other ob-

ject into the fan.

WARNING: Never touch electrical compo-

nents with wet or damp hands.

WARNING: To ensure the cooling unit

works properly and at full capacity, make sure

air supply to the unit is not obstructed.

WARNING: Water temperature during sa-

nitation must not be higher than 25 °C!

WARNING: Always make sure the power

socket you intend to plug the cooler into is ac-

cessible, so that the appliance can be imme-

diately unplugged in case of emergency.

WARNING: When unplugging the device

from the socket, grab the plug and pull it out.

Do not under any circumstances pull at the

cable; risk of damage.

WARNING: To turn the device o comple-

tely, unplug the appliance from the power soc-

ket.

WARNING: In the event the electrical wi-

ring of the product becomes damaged, sum-

mon a trained service technician. Do not under

any circumstances repair the device yourself.

WARNING: The cooling system contains

ammable coolant R290 (propane)!

WARNING: Emergency maintenance and

repair of the cooling system must be done by

trained, authorised technicians familiar with

cooling and electrical systems. The technicians

should have special training and qualication

for handling ammable substances in order to

perform service on coolers containing R290.

Follow basic regulations and safety measures

regarding service and repair!

WARNING: Do not use open ame or po-

tential sources of sparks in the vicinity of a

cooler using R290 coolant!

WARNING: After unpacking, place the coo-

ler so that heat created by the cooling unit can

be vented suciently.

WARNING: Do not place objects that could

prevent air circulation on top of the cooler.

5. INSTALLATION AND PLACEMENT:

Place the cooler onto a stable, level surface

(maximum permitted inclination: 2 degrees).

The appliance requires unobstructed air circu-

lation.

• Ensure sucient free space for air circulation

and heat dissipation.

• Ensure sucient supply of fresh air.

• The device must not be placed in an enclo-

sed space.

• The device must not be placed in the vicinity

of heat sources or exposed to direct sunlight.

Minimum distance of vents from an obstacle

that would limit air circulation must be in ac-

cordance with the table on page 6. Ideally, use

the device in a cool and well ventilated room.

The device is designed for use at ambient tem-

perature of at least 16 °C and at most 32°C.

WARNING: The device MUST NOT be used

or stored at ambient temperature lower than

0 °C. The device is designed for use in a normal

environment, always under a roof, protected

from rain or sunlight. Climate class N.

DANGER: Protect the cooler and electri-

cal connection from rain and spraying water!

WARNING: Do not under any circumstan-

ces lay the cooler on its side, not even during

transport.

NOTE: In order for the device to work

correctly and at maximum output, it is im-

portant to not cover up any of the device‘s

vents and ensure sucient air circulation.

obrázek 6 B

obrázek 6 A

Top Rear Right Side Left Side Front

200

(7,87)

200

(7,87)

200

(7,87)

508

(20)

200

(7,87)

Clerances, mm (inch)

WATER COOLERS

6. ELECTRICAL CONNECTION:

Connect the device to a power socket in ac-

cordance with specications on the machine

plate of the device. Electrical wiring is subject

to local regulations. If the power leads (cables)

are damaged, they must be replaced by the

manufacturer, their service technician or a si-

milarly qualied person to prevent risk of ha-

zardous situations.

DANGER: Do not use or turn on the device

if the power lead (cable) is damaged!

7. TESTING:

The product is delivered ready for immediate

use.

8. WARRANTY:

The device comes with a warranty in accor-

dance with general legal regulations of the

Czech Republic or in accordance with the tra-

de agreement. During the validity period of

the warranty, we will remove any defects on

the product free of charge, provided these de-

fects were not caused by excess wear, impro-

per handling, incorrect storage or by using the

product in a way that is counter to the instructi-

on manual or the product‘s design as dened

by the manufacturer. Materials replaced du-

ring the validity period of the warranty are our

property. The legitimacy of the warranty claim

is always decided by an authorised service

centre. Warranty provided by a retailer outsi-

de of the territory of the Czech Republic is go-

verned by the agreement between the retai-

ler and the buyer in their mutual relationship;

this agreement is not directly linked to the

manufacturer. The agreement does not give

the buyer the right to submit warranty claims

to the manufacturer. Transport expenses or

other costs are not covered by the warranty.

ATTENTION:

Electrical devices and appliances must be

checked/inspected at a time stipulated by

valid legislation of the country the device is

operated in. Inspection of wiring may only

be done by a person with valid authorisati-

on for this activity. Service work, provision

of spare parts and inspection is done by

the manufacturer or an authorised service

centre.

9. DESCRIPTION OF THE DEVICE :

9.1 Model series CWP 100, 200, 300:

gure 7 A gure 7 B

1. Overow

2. Inlet of the beverage

3. Recirculation pump

4. Outlet of the cooled beverage

5. Plastic tank

6. Fan

7. Cooling coil

8. Condenser

9. Motor compressor

10. Thermostat

11. Main switch

12. Power cable

9.2 Model series AS 80, 110, 160, 200:

gure 8 A

9.3 Model series AS 45 2 x Tap, AS 110 INOX TROPICAL 3 x Tap, AS 160 INOX

TROPICAL 4 X Tap :

1. CO2 inlet

2. Inlet of the beverage

3. Overow

4. Drip tray

5. Thermostat

6. Main switch

7. Tap

gure 8 B gure 8 C

1. Overow

2. Inlet of the beverage

3. Recirculation pump

4. Outlet of the cooled beverage

5. Plastic tank

6. Fan

7. Cooling coil

8. Condenser

9. Motor compressor

10. Thermostat

11. Main switch

12. Power cable

WATER COOLERS

9.4 Model series CWP 200 mobile, CWP 300 mobile, CWP 300/K pro mobile:

1. Dispense tower

2. Thermostat

3. Main switch

4. Inlet of the beverage

5. CO2 inlet

6. Plastic tank

7. Fan

8. Condenser

9. Motor compressor

gure 9 A gure 9 B

10. POURING FLUID INTO THE TANK:

Fill the plastic tank with clean water without any chemical treatment right up the overow.

gure 9 C gure 9 D

Pour the liquid here

Overow Overow

11. BEVERAGE SUPPLY CONNECTION AND PRESSURISATION:

gure 10 A

11.1 Connection and Pressurisation AS - 40 (coil 2x), C02/ N2

1. Beverage inlet

2. Beverage outlet

3. Keg coupler (A-system, S-system, M-sys-

tem)

4. F 5/8 x 9.5 mm speed tting

5. F 5/8 x 8 mm speed tting

6. Y 8 x 8 x 8 mm speed tting

7. CO2 pressure reducing valve

8. Beverage

9. JG SS 9.5 x 8 mm speed tting

10. JG 12.7 x 8 mm speed tting

11. JG F7/16 x 8 mm speed tting

12. Python

WARNING: After connecting the cooling coil the water level may drop in the plastic tank,

so check again and add water if necessary.

WARNING: Before starting, ll the tank with clean water up to the overow. Do not use

any chemicals, as this could damage the cooling system. An ecological antifreeze mixture

based on propylene glycol can be used for cooling to temperatures below freezing.

WARNING: Check the connection of the pump outlet, if it is not connected, water will

spray from the pump outlet after switching on the device.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere LINDR Wasserspender Handbücher

LINDR

LINDR Green Line AS-110-US Bedienungsanleitung

Beliebte Wasserspender Handbücher anderer Marken

Monarch Water

Monarch Water ULTIMATE MINI AQUA HE Bedienungsanleitung

Haier

Haier HLM-109B Bedienungsanleitung

abc

abc Fleck 5600SXT Bedienungsanleitung

GE GXOF18G Betriebsanleitung

Kenmore

Kenmore 625.385560 UltraFilter 650 Bedienungsanleitung

Innova

Innova CEV+ Kurzanleitung

Aries

Aries Hydra DI Handbuch

GE GNCF02H Bedienungsanleitung

ProFlo

ProFlo PFB Series Bedienungsanleitung

A.O. Smith

A.O. Smith FREZYA 300S Bedienungsanleitung

Frakco

Frakco Travelsoft RV 2400HD Bedienungsanleitung

Avanti

Avanti WD31EC Bedienungsanleitung

Avanti

Avanti WD360 Bedienungsanleitung

BRIO

BRIO CLCTTL520 Benutzerhandbuch

3M HCD-1 Bedienungsanleitung

Elkay

Elkay EFHFA8_2CJO Installationshandbuch

Coway

Coway CHP-671L Bedienungsanleitung

Aqua Essentials

Aqua Essentials Borg & Overström B4 Bedienungsanleitung