Lindy 38330 Bedienungsanleitung

9 Port HDMI 10.2G Multi-view Switch

User Manual English

Benutzerhandbuch Deutsch

Manuel Utilisateur Français

Manuale Italiano

No. 38330

lindy.com

User Manual English

Safety Instructions

! WARNING !

Please read the following safety information carefully and always keep this document with

the product.

Failure to follow these precautions can result in serious injuries or death from electric

shock, fire or damage to the product.

Touching the internal components or a damaged cable may cause electric shock, which

may result in death.

This device is a switching type power supply and can work with supply voltages in the range 100 - 240

VAC For worldwide usability four different AC adapters are enclosed: Euro type, UK type, US/Japan type

and Australia/New Zealand type. Use the appropriate AC adapter as shown in the picture and ensure it

is firmly secured in place and does not detach by pulling before installing into a power socket.

To reduce risk of fire, electric shocks, or damage:

▪Do not open the product nor its power supply. There are no user serviceable parts inside.

▪Only qualified servicing personnel may carry out any repairs or maintenance.

▪Never use damaged cables.

▪Do not expose the product to water or places of moisture.

▪Do not use this product outdoors it is intended for indoor use only.

▪Do not place the product near direct heat sources. Always place it in a well-ventilated place.

▪Do not place heavy items on the product or the cables.

▪Please ensure any adapters are firmly secured and locked in place before inserting into a wall socket

Instructions for Use of Power Supply

User Manual English

Introduction

Thank you for purchasing the 9 Port HDMI 10.2G Multi-view Switch. This product has been designed to

provide trouble free, reliable operation. It benefits from both a LINDY 2-year warranty and free lifetime

technical support. To ensure correct use, please read this manual carefully and retain it for future

reference.

The Lindy HDMI 10.2G Multi-view Switch is a high-performance solution for switching between a single or

multiple HDMI source devices and outputting to a single HDMI display or projector. As well as standard

switching betweenupto9 devices, content can beviewed from all connected devices in a varietyof layouts

in the display, ideal for a wide range of scenarios.

Package Contents

▪9 Port HDMI 10.2G Multi-view Switch

▪12VDC 2A Multi-country Power Supply (UK, EU, US & AUS), Barrel Size: 5.5/2.1mm

▪4 x Screws

▪IR Remote Control

▪Lindy Manual

Features

▪Display 9 HDMI inputs on a single display

▪Supports resolutions up to 3840x2160@30Hz 4:4:4 8bit

▪Simple switching via push button, IR remote or RS-232

▪Independent audio switching

▪Seamless switching between sources

Specification

Connectors

▪Input: 9 x HDMI Type A (Female)

▪Output: HDMI Type A (Female)

▪Control: RS-232 Terminal Blocks (Female)

▪Interface Standard: HDMI 1.4

▪Supports Bandwidth: 10.2Gbps

▪HDCP Support: 1.4

▪Supported Audio: HDMI Digital Audio Pass-through

▪IR Support: 38KHz

▪Serial Interface: RS-232

▪Housing Material: Metal

▪Operating Temperature: -15°C - 55°C (5°F - 131°F)

▪Storage Temperature: -15°C - 55°C (5°F - 131°F)

▪Humidity: 0 - 90% RH (non-condensing)

▪Colour: Black

User Manual English

Product Diagram

Front Panel

▪Power LED –This LED will illuminate once power has been provided to the switch.

▪12VDC In –Connect the included power supply once connected to a mains power outlet.

▪IR –IR receiver window for control using the included IR remote.

▪RS-232 –Connect to a PC for control via the below RS-232 commands. Please use the control

software found at the local Lindy website –38330 –Downloads.

▪Audio –Switch between audio modes.

▪Video –Switch between video modes.

Rear Panel

▪HDMI IN9 –HDMI IN1: Connect up to 9 HDMI source devices using HDMI cables.

▪HDMI Out: Connect to a single HDMI display using HDMI cable.

Side Panel

▪Ethernet: Unused

Installation

1. Ensure all devices are powered off before connection. Once the power supply is connected the Power

LED will illuminate.

2. Connect any required HDMI input devices to the HDMIIN ports. Please consult the “Viewing Modes”

section of this manual to ensure source devices are being displayed in a desirable location.

3. Connect the display to the HDMI Out port using an HDMI cable.

4. Power on all devices.

5. For simple push button control use the Audio & Video switches on the front panel. The video switch

will allow for cycling through the various video modes listed below. The audio switch will allow for

cycling through the connected source device audio as described in the following pages.

6. For IR control, please ensure the IR receiver is in line of sight of the IR remote. For instructions on

the various functions of the IR remote please see the diagram below.

7. For RS-232 control, please connect a PC to the RS-232 port of the switch and open the control

software from the Lindy website. For instructions on RS-232 control please see below.

User Manual English

Viewing Modes

OSD –On screen display

In each of the viewing modes offered by the switch you will see the OSD appear

in the top left of the picture for each input whenever you make a change to the

video channel, viewing mode or audio channel. The OSD will stay on for a few

seconds and then disappear. In the example shown, CH1 is the video channel,

the ♪ icon denotes that the audio source is from CH1 and 1920x1080P is the

resolution of the input video signal.

Video Mode Selection

The various modes can be selected by cycling through using the push button on

the main unit or using the mode button of the IR remote control. The available

video modes are shown below. Cycling through these modes will also allow the

separate inputs to be designated as the main window within each mode.

Audio Mode Selection

Initially the audio channel in use will be the most recently used channel so for example if you switch from

input 1 directly to quad view mode then the audio from input 1 will be used, this is denoted by the ♪ icon

being displayed in the OSD of that input as shown above. Pressing the audio button on the switch or

remote control will switch the audio to the next input with each press and then after input 8 to audio off (no

♪ icon is displayed) before returning to input 1 with the next press e.g. 2 > 3 > 4 > 5 > 6 > 7 > 8 > 9 > Mute

> 1.

CH1

1920x1080P

♪

User Manual English

Video Mode Layouts

User Manual English

Control

Push Button Control

▪The Video push button switch allows the user to cycle through each of the video modes above.

▪The Audio push button switch allows the user to cycle through each of the connected input device’s

audio to be output.

IR Remote Control

User Manual English

RS-232 Control

Please connect the switch to a PC via the switch’s RS-232 port. Open the control software from your

local Lindy website / 38330 / Downloads.

To start send HEXMODE / 9600 baud. Please see the commands below.

Baud Rate: 9600bps

Function

Mode 1-1

Mode 1-2

Mode 1-3

Mode 1-4

Mode 1-5

Mode 1-6

Mode 1-7

Mode 1-8

Mode 1-9

Audio input 1

Audio input 2

Audio input 3

Audio input 4

Audio input 5

Audio input 6

Audio input 7

Audio input 8

Mode 3-1

Mode 3-2

Mode 3-3

Mode 3-4

Mode 9

Mode 2-3

Mode 2-4

Mode 2-2

Resolution: 1080p

Resolution: 4K@30Hz

Switch resolution between 1080p and 4K@30Hz

Turn on/off OSD

Mode 12-1

Mode 12-2

Mode 12-3

Mode 12-4

Mode 12-5

Mode 12-6

Mode 12-7

Mode 12-8

Mode 5-1

Mode 5-2

User Manual English

Mode 5-3

Mode 5-4

Mode 5-5

Mode 5-6

Mode 5-7

Mode 5-8

Mode 5-9

Mode 6-1

Mode 6-2

Mode 6-3

Mode 6-4

Mode 6-5

Mode 6-6

Mode 6-7

Mode 6-8

N/A

Mode 10

Mode 11

Troubleshooting

There is no audio

•Please check the active audio channel by pressing the audio button on the switch or remote control

until the ♪ icon is present in the correct channel.

Picture is distorted, incomplete, missing colours etc.

•Please check that all HDMI cables are correctly seated in the ports and reboot the connected source

devices.

•Check that video scaling is correctly configured on any connected PC’s graphics card:

Lindy regularly checks and tests our product range to ensure maximum compatibility and performance.

For the most up to date version of this manual, please refer to your local Lindy website, search for the

relevant part number and find the manual under Downloads.

Inhaltsverzeichnis

Sprachen:

Andere Lindy Schalten Handbücher

Lindy

Lindy 39336 Bedienungsanleitung

Lindy

Lindy Presentation Switch Pro Bedienungsanleitung

Lindy

Lindy 25028 Bedienungsanleitung

Lindy

Lindy CPU IP Access Switch Plus Bedienungsanleitung

Lindy

Lindy 38273 Bedienungsanleitung

Lindy

Lindy 43228 Bedienungsanleitung

Lindy

Lindy 43387 Bedienungsanleitung

Lindy

Lindy 39123 Produktinformationsblatt

Lindy

Lindy 32969 Bedienungsanleitung

Lindy

Lindy Modular Matrix 38251 Bedienungsanleitung

Lindy

Lindy 38053 Bedienungsanleitung

Lindy

Lindy 38414 Bedienungsanleitung

Lindy

Lindy 43154 Bedienungsanleitung

Lindy

Lindy CAT-16 IP Bedienungsanleitung

Lindy

Lindy 42887 Bedienungsanleitung

Lindy

Lindy 1:02 Bedienungsanleitung

Lindy

Lindy 43228 Bedienungsanleitung

Lindy

Lindy 38150 Bedienungsanleitung

Lindy

Lindy 38156 Bedienungsanleitung

Lindy

Lindy 25044 Bedienungsanleitung

Lindy

Lindy 38032 Bedienungsanleitung

Lindy

Lindy 32165 Bedienungsanleitung

Lindy

Lindy 38033 Bedienungsanleitung

Lindy

Lindy 32254 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung