Linear Technology DC1444A Bedienungsanleitung

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 1444A

1-CHANNEL/2-CHANNEL, 12-BIT, SAR ADCS WITH I

C INTERFACE

DESCRIPTION

LTC2301/LTC2305

Demonstration circuit 1444A features the

LTC2301/LTC2305, low noise, low power, 1-

Channel/2-Channel, 12-Bit, successive

approximation ADCs with an I

C compatible

serial interface. The LTC2301/LTC2305 are

available in a 12-pin MSOP package.

DC1444A demonstrates the DC performance

of the LTC2301/LTC2305 ADCs in

conjunction with the DC590B Quick Eval

data collection board. Alternatively, by

connecting the DC1444A into a customer

application the performance of the

LTC2301/LTC2305 can be evaluated directly

in that circuit. DC1444A-A uses

LTC2301CMS.

DC1444A-B uses LTC2305CMS.

Design files for this circuit board are available.

Call the LTC factory.

LTC is a trademark of Linear Technology Corporation

FIGURE 1. DC1444A CONNECTION DIAGRAM

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 1444A

1-CHANNEL/2-CHANNEL, 12-BIT, SAR ADCS WITH I

C INTERFACE

DC590B QUICK START PROCEDURE

Connect DC1444A to a DC590B USB serial

controller using the supplied 14-conductor ribbon

cable. Make sure the VCCIO jumper of the

DC590B is in the 5V position. Connect DC590B

to a host PC with a standard USB A/B cable.

Apply analog input voltage to IN+ and IN- (CH0

and CH1 for LTC2301) on connector JP1. Run the

evaluation software supplied with DC590B or

download it from www.linear.com. The correct

control panel will be loaded automatically. Click

the COLLECT/PAUSE (Figure 2) button to begin

reading the ADC. Pressing COLLECT/PAUSE

again stops data collection. The Help menu

contains information on Data Logging the ADC

results. The Tools menu has the Data Logging

option as well as options for changing the number

of points displayed, the number of points in an

average and whether the data is displayed in LSBs

or Volts. The View menu can be used to access

the LTC2301/LTC2305 product page.

If the Quick Eval program is started without the

demo board attached to DC590B, the Tools menu

can be used to check for updates and automatically

install them. DC1444A requires at least version

K76 of the Quick Eval software.

HARDWARE SET UP

SIGNAL CONNECTIONS

See Figure 1 for locations.

JP1 Connector for IN+/IN- LTC2301 (CH0-

CH1 LTC2305), COM and BIAS/2. Limit input

voltage swings to GND-VDD. For optimum

performance, the input should be bandlimited to

the frequencies of interest.

JP2 DC590 interface connector. Provides power

and I2C interface to DC1444A.

JP3 AD1 I

C address line. Set to GND for

operation with supplied software.

JP4 AD0 I

C address line. Set to GND for

operation with supplied software.

JP5 BIAS Selects between Refcomp and an

external bias voltage to drive the Bias/2 line.

Bias/2 is designed to set a center point for the

minus input during bipolar operation.

EXT_BIAS External Bias connection. This can

be used to drive the BIAS/2 line through a 2:1

divider. To use this pin put jumper JP5 in the EXT

position and apply desired bias voltage.

5V Five volt supply line for DC1444A. Power is

normally provided to this line by DC590B. Apply

power to this line only if DC590B is not used.

GND Ground line for DC1444A

SDA I

C bidirectional data line. Controlled by

DC590B if connected.

SCL I

C clock line. Controlled by DC590B if

connected.

VREF Connected to ADC Vref pin through 50

ohm resistor.

REFCOMP Connected to ADC Refcomp pin.

BIAS/2 Bias voltage/2 (Refcomp or Ext)

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 1444A

1-CHANNEL/2-CHANNEL, 12-BIT, SAR ADCS WITH I

C INTERFACE

USING DC1444A WITHOUT DC590

Interface signals SDA and SCL and power are

normally provided to DC1444A by DC590. If you

use this board without DC590, it is the user’s

responsibility to connect a 5V power supply and

ground as well as generating SDA and SCL. These

signals can be provided through the 14-pin ribbon

cable connector. See schematic for pin out. See

LTC2301/LTC2305 Data Sheet for information on

driving SDA and SCL.

Figure 2. DC1444A-A Quick Eval Screenshot

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 1444A

1-CHANNEL/2-CHANNEL, 12-BIT, SAR ADCS WITH I

C INTERFACE

Dieses Handbuch passt für folgende Modelle

Andere Linear Technology Hauptplatine Handbücher

Linear Technology

Linear Technology DC1555A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1821B Bedienungsanleitung

Linear Technology

Linear Technology DC2073A Series Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1485A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC961B Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC861A-A Bedienungsanleitung

Linear Technology

Linear Technology DC2117A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1734A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC2024A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1719A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology LTC2418 Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC2581A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC2177A-B Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1962C Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology LTC3773EG Bedienungsanleitung

Linear Technology

Linear Technology LT5557 Bedienungsanleitung

Linear Technology

Linear Technology DC776 Bedienungsanleitung

Linear Technology

Linear Technology DC1257B Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC2026A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology LTC6655 Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1537A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC2548A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1662A Bedienungsanleitung

Linear Technology

Linear Technology DC2007A-A Kurzanleitung zur Einrichtung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung