Linear Technology DC2073B Kurzanleitung zur Einrichtung

dc2073bfa

DEMO MANUAL DC2073B

DESCRIPTION

LTC1799, LTC6900, LTC6905,

LTC6905-XXX, LTC6906, LTC6907

LTC6908 SOT23 Silicon Oscillators

DC2073Bdemoboardfeatures Linear Technology'sSOT23

packaged silicon oscillators. The DC2073B demo board is

available in eleven different options; DC2073B-A through

DC2073B-K. These eleven options provide for the evalu-

ation of resistor-set oscillator ICs and fixed frequency

ICs (Table1).

L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear

Technology Corporation. All other trademarks are the property of their respective owners.

Design files for this circuit board are available at

http://www.linear.com/demo/DC2073B

Table 1. Resistor-Set Oscillator ICs and Maximum Frequency Error at TA= 25°C

PART NUMBER, BOARD ASSEMBLY FREQUENCY PROGRAM METHOD DESCRIPTION

LT C

6905, DC2073B-A Resistor Programmable 17.225MHz ≤ fOSC ≤ 170MHz, ±1.4% at V+ = 2.7V

and ±2.2% at V+= 5V

LTC1799, DC2073B-B Resistor Programmable 5kHz ≤ fOSC ≤ 10MHz, ±1.5% at V+ = 3V and

±1.5% at V+= 5V (Up to 20MHz)

LTC6900, DC2073B-C Resistor Programmable 5kHz ≤ fOSC ≤ 10MHz, ±1.5% at V+ = 3V and

±1.5% at V+= 5V (Up to 20MHz)

LTC6905-133, DC2073B-D Three Fixed Frequencies Set by Three-State Input fOSC = 133MHz, 66.7MHz and 33.5MHz,

±1.0% at V+= 3V and ±1.5% Typical at V+= 5V

LTC6905-100, DC2073B-E Three Fixed Frequencies Set by Three-State Input fOSC = 100MHz, 50MHz and 25MHz,

±1.0% at V+= 3V and ±1.5% Typical at V+= 5V

LTC6905-96, DC2073B-F Three Fixed Frequencies Set by Three-State Input fOSC = 96MHz, 48MHz and 24MHz,

±1.0% at V+= 3V and ±1.5% Typical at V+= 5V

LTC6905-80, DC2073B-G Three Fixed Frequencies Set by Three-State Input fOSC = 80MHz, 40MHz and 20MHz,

±1.0% at V+= 3V and ±1.5% typical at V+= 5V

LTC6906, DC2073B-H Resistor Programmable 10kHz ≤ fOSC ≤ 1MHz, ±0.5% at V+= 2.7V to 3.6V

and ±0.7% at V+= 2.25V

LTC6907, DC2073B-I Resistor Programmable 400kHz ≤ fOSC ≤ 4MHz, ±0.65% at V+= 3V to 3.6V

LTC6908-1, DC2073B-J Spread Spectrum Modulation, Complementary

Outputs (0°/180°) Resistor Programmable

250kHz ≤ fOSC ≤ 5MHz, ±1.5% at V+= 2.7V and

±2.0% at V+= 5V

LTC6908-2, DC2073B-K Spread Spectrum Modulation, Quadrature

Outputs (0°/90°) Resistor Programmable

250kHz ≤ fOSC ≤ 5MHz, ±1.5% at V+= 2.7V and

±2.0% at V+= 5V

dc2073bfa

DEMO MANUAL DC2073B

QUICK START PROCEDURE

Test Equipment:

1. A single 3V power supply.

2. An oscilloscope with a bandwidth of at least 5x fOSC.

(For example, if fOSC = 100MHz then use a 500MHz

oscilloscope).

3. A screwdriver to adjust the potentiometer.

Note:The DC2073B potentiometer is shorted with a

zero ohm resistor for factory testing. The zero ohm

(RJ10) resistor must be removed to allow setting the

frequency with a screwdriver. If the potentiometer is

set to a high value (>100k), then touching the DC2073B

can produce output jitter.

Basic Test Procedure:

1. Connectpower supply to V+and GND, turrets E4 andE5.

2. Connect oscilloscope probe to OUT1 and GND.

Note: The ground lead of an oscilloscope probe has a

series inductance that can generate a resonant circuit

with the probe's capacitance. Probe resonance adds

transient peaks and ringing on a high speed wave-

form. Reliable probing of the high frequency LTC6905

and LTC6905-XXX (with corresponding demo boards

DC2073B-A, -D, -E, -F or -G), must use a very short

connectionofthe

oscilloscopeprobegroundtotheboard

GND (see probe tip picture in Figure1 Test Setup).

3. Set the JP1 jumper to the N divider position for the

desired frequency shown on Table2.

4. Turn on supply.

5. The oscilloscope display shows a 3V squarewave

(0V to 3V).

6. For the resistor-set ICs (DC2073B-A, -B, -C, -H, -I, -J

or -K) turn the RPOT potentiometer for the desired fre-

quency.(The frequency adjustment is very coarse when

the potentiometer is turned near the fully clockwise or

counter-clockwise position).

Verify Oscillator Accuracy

The fOSC accuracy of the resistor-set ICs (DC2073B-A, -B,

-C, -H, -I, -J or -K), can be verified by setting RSET to the

exact value from the fOSC equation shown in Table 2. For

the DC2073B-A, -B, -C, -J, -K, RSET = RPOT + RSET2.

RSET1 and RSET2 are never installed on the same board.

Connecting an ohmmeter across RPOT and RSET1 or

RSET2 forces current into the IC set pin (Pin 3 or 4) and

causes an error in the ohmmeter reading. The RS resistor

is in series with RPOT and equal to RSET1 or RSET2 and

the equivalent RSET = RPOT + RS.

Procedure to Verify Oscillator Accuracy

a. Calculate RSET for the desired frequency (RSET in Table 2).

b. Removethepower supply leadsfrom DC2073B and con-

nect an ohmmeter from POT (E6) to V+(DC2073B-A,

-B, -C, -J or -K) or GND (DC2073B-H or-I).

C. Adjust RPOT for the exact value of RSET needed.

Note: If the potentiometer is turned near the fully clock-

wiseorcounter-clockwisepositiontheRPOTadjustment

may be too coarse for setting an exact RSET value. In

addition, for a frequency adjustment near the upper or

lower fOSC range, RSET may be greater or less than the

default DC2073B RPOT + RSET1 or RSET2 value, in this

case the RSET1 or RSET2 resistor must be removed

and replaced with a lower or higher value.

dc2073bfa

DEMO MANUAL DC2073B

QUICK START PROCEDURE

Figure 1. Test Setup

dc2073bfa

DEMO MANUAL DC2073B

QUICK START PROCEDURE

Table 2. fOSC Frequency and N Divider Setting

LTC6905, DC2073B-A

fOSC =168.5MHz •10kΩ

RSET

+1.5MHZ











•1

N, RSET =168.5MHz •10kΩ

N• fOSC –1.5MHz

N = 1 (JP1 to V+), 68.9MHz ≤ fOSC ≤ 170MHz

N = 2 (JP1 to OPEN), 34.45MHz ≤ fOSC ≤ 85MHz

N = 4 (JP1 to GND), 7.225MHz ≤ fOSC ≤ 42.5MHz

LTC1799, DC2073B-B

fOSC =

10MHz

N•

10kΩ

RSET

, RSET =

10MHz

fOSC

•

10kΩ

N = 1 (JP1 to GND), 500kHz ≤ fOSC ≤ 20MHz

N = 10 (JP1 to OPEN), 50kHz ≤ fOSC ≤ 2MHz

N = 100 (JP1 to V+), 5kHz ≤ fOSC ≤ 200kHz

LTC6900, DC1073A-C

fOSC =

10MHz

N•

20kΩ

SET

, RSET =

10MHz

OSC

•

20kΩ

N = 1 (JP1 to GND), 500kHz ≤ fOSC ≤ 20MHz

N = 10 (JP1 to OPEN), 50kHz ≤ fOSC ≤ 2MHz

N = 100 (JP1 to V+), 5kHz ≤ fOSC ≤ 200kHz

LTC6905-133, DC2073B-D

fOSC =

133MHz

N = 1 (JP1 to V+), fOSC = 133MHz

N = 2 (JP1 to OPEN), fOSC = 66.7MHz

N = 4 (JP1 to GND), fOSC = 33.5MHz

LTC6905-10, DC2073B-E

fOSC =

100MHz

N = 1 (JP1 to V+), fOSC = 100MHz

N = 2 (JP1 to OPEN), fOSC = 50MHz

N = 4 (JP1 to GND), fOSC = 25MHz

LTC6905-96, DC2073B-F

fOSC =

96MHz

N = 1 (JP1 to V+), fOSC = 96MHz

N = 2 (JP1 to OPEN), fOSC = 48MHz

N = 4 (JP1 to GND), fOSC = 24MHz

LTC6905-80, DC2073B-G

fOSC =

80MHz

N = 1 (JP1 to V+), fOSC = 80MHz

N = 2 (JP1 to OPEN), fOSC = 40MHz

N = 4 (JP1 to GND), fOSC = 20MHz

LTC6906, DC2073B-H

fOSC =

1MHz

N•

100kΩ

RSET

, RSET =

1MHz

fOSC

•

100kΩ

N = 1 (JP1 to GND), 0.1MHz ≤ fOSC ≤ 1MHz

N = 3 (JP1 to OPEN), 33kHz ≤ fOSC ≤ 333kHz

N = 10 (JP1 to V+), 10kHz ≤ fOSC ≤ 100kHz

LTC6907, DC2073B-I

fOSC =

4MHz

N•

50kΩ

SET

, RSET =

4MHz

OSC

•

50kΩ

N = 1 (JP1 to GND), 0.4MHz ≤ fOSC ≤ 4MHz

N = 3 (JP1 to OPEN), 133kHz ≤ fOSC ≤ 1.33MHz

N = 10 (JP1 to V+), 40kHz ≤ fOSC ≤ 400kHz

LTC6908-1, DC2073B-J

Complementary Outputs (0°/180°) without Modulation:

250kHz ≤ fOSC ≤ 5MHz, (JP1 to DIV/MOD)

fOSC =

10MHz

N•

10kΩ

RSET

, RSET =

10MHz

fOSC

•

10kΩ

Spread Spectrum Modulation Rate:

(JP1 to GND), fOSC/16

(JP1 to OPEN), fOSC/32

(JP1 to V+), fOSC/64

LTC6908-1, DC2073B-K

Quadrature Outputs (0˚/90˚) without Modulation:

250kHz ≤ fOSC ≤ 5MHz, (JP1 to DIV/MOD)

fOSC =

10MHz

N•

10kΩ

SET

, RSET =

10MHz

OSC

•

10kΩ

Spread Spectrum Modulation Rate:

(JP1 to GND), fOSC/16

(JP1 to OPEN), fOSC/32

(JP1 to V+), fOSC/64

dc2073bfa

DEMO MANUAL DC2073B

Information furnished by Linear Technology Corporation is believed to be accurate and reliable.

However, no responsibility is assumed for its use. Linear Technology Corporation makes no representa-

tion that the interconnection of its circuits as described herein will not infringe on existing patent rights.

dc2073bfa

DEMO MANUAL DC2073B

Linear Technology Corporation

1630 McCarthy Blvd., Milpitas, CA 95035-7417

(408) 432-1900 ●FAX: (408) 434-0507 ●www.linear.com

 LINEAR TECHNOLOGY CORPORATION 2013

LT 0616 Rev A • PRINTED IN USA

DEMONSTRATION BOARD IMPORTANT NOTICE

Linear Technology Corporation (LT C ) provides the enclosed product(s) under the following AS IS conditions:

This demonstration board (DEMO BOARD) kit being sold or provided by Linear Technology is intended for use for ENGINEERING DEVELOPMENT

OR EVALUATION PURPOSES ONLY and is not provided by LT C for commercial use. As such, the DEMO BOARD herein may not be complete

in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including but not limited to product safety

measures typically found in finished commercial goods. As a prototype, this product does not fall within the scope of the European Union

directive on electromagnetic compatibility and therefore may or may not meet the technical requirements of the directive, or other regulations.

If this evaluation kit does not meet the specifications recited in the DEMO BOARD manual the kit may be returned within 30 days from the date

of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY THE SELLER TO BUYER AND IS IN LIEU

OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS

FOR ANY PARTICULAR PURPOSE. EXCEPT TO THE EXTENT OF THIS INDEMNITY, NEITHER PARTY SHALL BE LIABLE TO THE OTHER FOR

ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user releases LT C from all claims

arising from the handling or use of the goods. Due to the open construction of the product, it is the user’s responsibility to take any and all

appropriate precautions with regard to electrostatic discharge. Also be aware that the products herein may not be regulatory compliant or

agency certified (FCC, UL, CE, etc.).

No License is granted under any patent right or other intellectual property whatsoever. LT C assumes no liability for applications assistance,

customer product design, software performance, or infringement of patents or any other intellectual property rights of any kind.

LT C currently services a variety of customers for products around the world, and therefore this transaction is not exclusive.

Please read the DEMO BOARD manual prior to handling the product. Persons handling this product must have electronics training and

observe good laboratory practice standards. Common sense is encouraged.

This notice contains important safety information about temperatures and voltages. For further safety concerns, please contact a LT C applica-

tion engineer.

Mailing Address:

Linear Technology

1630 McCarthy Blvd.

Milpitas, CA 95035

X-ON Electronics

Largest Supplier of Electrical and Electronic Components

Click to view similar products for Clock & Timer Development Tools category:

Click to view products by Analog Devices manufacturer:

Other Similar products are found below :

AD9517-0A/PCBZ AD9522-4/PCBZ AD9520-5PCBZ AD9530/PCBZ AD9553/PCBZ ADCLK914PCBZ LMH2180SDEVAL DSC400-

0333Q0032KE1-EVB TDGL013 MAX2880EVKIT# MAX2750EVKIT MAX2752EVKIT ADCLK946PCBZ ADCLK946/PCBZ

MAX2622EVKIT EKIT01-HMC1032LP6G Si5332-8IX-EVB Si5332-12IX-EVB RV-3029-C2-EVALUATION-BOARD-OPTION-B

Si5332-6IX-EVB SKY72310-11-EVB EV1HMC8364LP6G RV-8263-C7-EVALUATION-BOARD EVK9FGV1002 EVK9FGV1008

EV1HMC6832ALP5L EVAL01-HMC830LP6GE EVAL01-HMC911LC4B EVAL01-HMC988LP3E TS3002DB 125605-HMC702LP6CE

LMX2487E-EVM MIKROE-2481 2045 EKIT01-HMC835LP6G EKIT01-HMC834LP6GE TS3006DB DSC-TIMEFLASH2-KIT1 110227-

HMC510LP5 110227-HMC513LP5 AD9515/PCBZ ADCLK948/PCBZ ADCLK954/PCBZ 112261-HMC739LP4 ADCLK925/PCBZ

AD9522-0/PCBZ AD9520-4/PCBZ AC164147 DFR0469 LMK04133EVAL/NOPB

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Linear Technology Hauptplatine Handbücher

Linear Technology

Linear Technology DC2268A-E Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC2358A Bedienungsanleitung

Linear Technology

Linear Technology DC1338A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC2117A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1216A-A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1670A Bedienungsanleitung

Linear Technology

Linear Technology DC2072A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC2548A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC250A Bedienungsanleitung

Linear Technology

Linear Technology 749 Bedienungsanleitung

Linear Technology

Linear Technology DC2007A-A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1392A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC2160A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1339 Bedienungsanleitung

Linear Technology

Linear Technology DC2026 Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC2042A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1696 Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1850A-A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1818A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1639A Bedienungsanleitung

Linear Technology

Linear Technology DC2423A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1771A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC2565A Kurzanleitung zur Einrichtung

Linear Technology

Linear Technology DC1999A Kurzanleitung zur Einrichtung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Biostar

Biostar M7VIT Bravo Bedienungs- und Montageanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung