Linksys PAP2 Bedienungsanleitung
csdata brasil Ltda. / Tel. +55 81 3422 1714 / Fax. +55 81 3422 1984 / VoIP 2031
User Manual
Linksys PAP2
Broadband Phone Service
Linhagratuita
grupo csdata
www.linhagratuita.com.br
Linksys PAP2 User Manual csdata the VoIP Company
csdata brasil Ltda. / Tel. +55 81 3422 1714 / Fax. +55 81 3422 1984 / VoIP 2031
Please follow the step-by-step guide below to
set up your Linksys PAP2 for use with
Linhagratuita Broadband Phone Service
Before you begin to configure your device:
A Set your device to factory default:
1. Pick up the phone attached to your Linksys.
2. Dial ****73738#
3. Press 1 to confirm.
. Hang up the phone.
2
Linksys PAP2 User Manual csdata the VoIP Company
csdata brasil Ltda. / Tel. +55 81 3422 1714 / Fax. +55 81 3422 1984 / VoIP 2031
STEP 1 Connect the Linksys PAP2 to your
Broadband Connection
Use this illustration of the back of the ATA to connect it to your network
1. Phone 1 - Plug your analog telephone cord in here:
2.
Ethernet Port - Use an Ethernet cable to connect your PAP2 to your router or
Internet connection:
3. Power connection - Connect the power to your PAP2:
3
Linksys PAP2 User Manual csdata the VoIP Company
csdata brasil Ltda. / Tel. +55 81 3422 1714 / Fax. +55 81 3422 1984 / VoIP 2031
STEP 2 Verify & Configure your IP address
If you have purchased your Linksys PAP2 adaptor from Linhagratuita, skip this
section and proceed to Section B
If your network utilizes a DHCP Server to assign IP addresses to network devices,or if you are
connecting the PAP2 to a home router such as Linksys or Netgear, please do the following:
A First you must verify that your PAP2 will acquire an IP adress automatically
1. Pick up the phone connected to the “Phone 1” port of the PAP2 and enter “* * * *”.
You will then hear a voice say, “Linksys configuration menu.”
2. Press the keys 110 # on your analog phone.
3. Press # to enable DHCP.
. Press to save your configuration settings. Hang up the phone and wait for a couple
of minutes.
B Next, you need to verify that your PAP2 has a valid IP address Be prepared with
pen and paper, and proceed with the following:
1. Pick up the phone connected to Phone 1 of the PAP2 and enter “* * * *”. You will
hear a voice prompt say, “Linksys configuration menu.”
2. Press keys 1 1 0 # on your analog phone. The system will then read back the IP
address of your PAP2. Please write this down.
If the IP is 0 0 0 0, your PAP2 does not have a valid IP address In this case, you
need to:
1. Hang up the phone, then unplug and replug your PAPA2 power cord.
2. Wait 2 minutes, then check the IP again (see STEP 2).
3. If the automated voice again says your number is still 0.0.0.0, there are three
reasons for this:
a. Your DHCP Server is not assigning an IP address to the PAP2. In this case,
contact your network administrator or ISP for assistance.
b. Your network does not have a DHCP server. In this case, you must
configure your IP manually (See Page 7).
c. You have purchased a Static IP. In this case, configure your IP manually
(See Page 7).
4
Linksys PAP2 User Manual csdata the VoIP Company
csdata brasil Ltda. / Tel. +55 81 3422 1714 / Fax. +55 81 3422 1984 / VoIP 2031
STEP 3 Prepare your device to connect with the
Linhagratuita network
1. Open your configuration page by typing the following address into your web
browser:
https://aaa.bbb.ccc.ddd/admin/advanced
(“aaa.bbb.ccc.ddd. “ represents the IP address of your PAP2).
2. On the configuration page click “Admin Logic,” then click “switch to advanced view.”
3. Next, click the tab link “Line1” and fill in the configuration as shown below. Do not
disturb other default values given on the page.
. If you want to configure “Line 2” repeat the above configuration with a new
Linhagratuita DID/PIN account.
5. After making the above changes, click “Save Settings.”
6. Close your browser.
1 Inbound-Outbound Configuration with Linhagratuita DID
5
(switch to advanced view) Admin Login
SIP Port 5065
Proxy xxx
Outbound Proxy xxxx
Outbound Proxy yes
Display Name Type Your Name
User ID Type in xxx
Password Type in xxx DID Password
Use Auth ID yes
Auth ID Type in xxx
Prefered Codec G729a
Linksys PAP2 User Manual csdata the VoIP Company
csdata brasil Ltda. / Tel. +55 81 3422 1714 / Fax. +55 81 3422 1984 / VoIP 2031
6
Linksys PAP2 User Manual csdata the VoIP Company
csdata brasil Ltda. / Tel. +55 81 3422 1714 / Fax. +55 81 3422 1984 / VoIP 2031
7
Linksys PAP2 User Manual csdata the VoIP Company
csdata brasil Ltda. / Tel. +55 81 3422 1714 / Fax. +55 81 3422 1984 / VoIP 2031
2: Outbound Dialtone (No IVR) Configuration
8
SIP Port 5065
Proxy xxx
Outbound Proxy xxx
Register no
Make calls without Reg yes
Use Outbound Proxy yes
Display Name Type Your Name
User ID Type in xxx PIN
Use Auth ID yes
Preffered Codec G729a
Linksys PAP2 User Manual csdata the VoIP Company
csdata brasil Ltda. / Tel. +55 81 3422 1714 / Fax. +55 81 3422 1984 / VoIP 2031
9
Linksys PAP2 User Manual csdata the VoIP Company
csdata brasil Ltda. / Tel. +55 81 3422 1714 / Fax. +55 81 3422 1984 / VoIP 2031
10
Andere Handbücher für PAP2
14
Andere Linksys Adapter Handbücher
Linksys
Linksys Small Business SPA2102 Bedienungsanleitung
Linksys
Linksys SPA3102 Bedienungsanleitung
Linksys
Linksys WPC54GX Bedienungsanleitung
Linksys
Linksys PLE200 - PowerLine AV EN Adapter Bridge Original Betriebsanleitung
Linksys
Linksys WPC4400N Bedienungsanleitung
Linksys
Linksys SPA-1001 Bedienungsanleitung
Linksys
Linksys USBBT100 Bedienungsanleitung
Linksys
Linksys WGA54G Bedienungsanleitung
Linksys
Linksys USB1000 Bedienungsanleitung
Linksys
Linksys EC1000 Original Betriebsanleitung
Linksys
Linksys Fax Adapter Bedienungsanleitung
Linksys
Linksys WPC54G EU Bedienungsanleitung
Linksys
Linksys PAP2-T Bedienungsanleitung
Linksys
Linksys Linksys SPA2101 Bedienungsanleitung
Linksys
Linksys SPA2002 Bedienungsanleitung
Linksys
Linksys WUSB54GS EU Bedienungsanleitung
Linksys
Linksys WGA54G Original Betriebsanleitung
Linksys
Linksys Instant Broadband Series Bedienungsanleitung
Linksys
Linksys WPC54GS - Refurb Wrls-g Notebook Adr Spdbstr No... Bedienungsanleitung
Linksys
Linksys SPA1 Series Bedienungsanleitung
