Linksys USB3GIG Bedienungsanleitung
USB Ethernet Adapter
Model: USB3GIG
User Guide
ii
About This Guide
Linksys
ii
About This Guide
Online Resources
Resource Website
Linksys www.linksys.com
Linksys International www.linksys.com/international
Glossary www.linksys.com/glossary
Network Security www.linksys.com/security
Copyright and Trademarks
Linksys, Belkin and the Linksys Logo are registered trademarks or trademarks
of Belkin International, Inc. and/or its affiliates in the U.S. and certain other
countries. Copyright ©2014 Belkin International, Inc. All rights reserved. Other
brands and product names are trademarks or registered trademarks of their
respective holders.
iii
Table of Contents
Linksys
iii
CHAPTER 1 QUICK START GUIDE. . . . . . . . . . . . . . . . 1
LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Installing the Adapter. . . . . . . . . . . . . . . . . . . . . . . . 1
CHAPTER 2 DRIVER INSTALLATION . . . . . . . . . . . . . 2
Driver Installation for Windows XP. . . . . . . . . . . . . . . . 2
Driver Installation for Windows Vista . . . . . . . . . . . . . . 2
Driver Installation for Windows 8 and Windows 8.1 . . . . . 2
Driver Installation for Mac OS X . . . . . . . . . . . . . . . . . 3
Appendix A: Troubleshooting . . . . . . . . . . . . . . . . . 5
Appendix B: Specifications . . . . . . . . . . . . . . . . . . . 6
Table of Contents
1
CHAPTER 1 Product Overview
Linksys
Location of
Link/Activity LED
Link/Activity (Blue) The Link/Activity LED is solid blue
when there is an active link over the Ethernet interface.
The LED flashes blue when data is being transferred
over the Ethernet interface.
USB This is a USB 3.0 Type A connector that you
connect to an available USB port on your computer or
other device. Connecting the adapter to a USB 3.0 port
will yield best performance.
Ethernet This port connects the adapter to your
network’s router or switch.
CHAPTER 1 Product Overview
Thank you for choosing the Linksys USB Ethernet Adapter. This adapter lets
you easily connect any device with a USB port – such as your computer, game
console, or DVR – to a wired network. Small and light, yet rugged enough for
travel, the adapter keeps you connected almost everywhere you go.
LEDs
Ports
Installing the Adapter
1. Remove the caps from the adapter to expose the USB and Ethernet ports.
2. Insert the adapter’s USB connector into an available USB port on your
computer or device.
NOTE:
For maximum performance, connect the adapter directly to a USB 3.0 port
on your computer. If you are connecting to a USB hub, make sure it operates
at USB 3.0 speed.
3. Insert one end of an Ethernet network cable into the adapter’s RJ-45 port.
4. Insert the other end of the Ethernet network cable into the Ethernet port on
your network’s router or switch.
Chapter 2: Driver Installation
Linksys
2
Chapter 2: Driver Installation
After physically connecting the adapter to your computer’s USB port or hub,
follow these instructions to install the hardware device driver. The installation
procedures for the hardware device driver vary depending on your computer’s
operating system, so make sure to follow the instructions for your operating
system. The instructions also may vary slightly depending on your current
operating system’s configuration. If at any time during the installation you
encounter problems, refer to Appendix A: Troubleshooting, page 5.
NOTE:
Throughout this user guide, it is assumed that “D” is the letter of your
CD-ROM drive.
Driver Installation for Windows XP/Vista/
Win 7/Win 8
NOTE:
Do not click Cancel at any time during the installation process. Doing so will
prevent your driver from being properly installed on your computer.
1. If you have not yet done so, start your computer.
2. Insert the Drivers & Documentation CD into your CD-ROM drive
3. Open up the CD’s folder and double-click Setup.exe.
4. Select Next to advance to the next screen
InstallShield Wizard
5. Select Install
Chapter 2: Driver Installation
Linksys
3
6. When the driver is finished installing, click Finish
That’s it. You’re done with installation of the USB Ethernet Adapter.
For more information about networking under Microsoft Windows, refer
to your Microsoft Windows documentation.
Driver Installation for Mac OS X
NOTE:
Do not click Cancel at any time during the installation process. Doing so will
prevent your driver from being properly installed on your computer.
1. If you have not yet done so, start your computer.
2. Insert the Drivers & Documentation CD into your CD-ROM drive
3. Open up the CD’s folder followed by the MAC folder
4. Open the Installer file
5. Follow the steps in the Installer application, when the installation is complete
you will be asked to restart your Mac. Click the Restart button to finish setup.
Chapter 2: Driver Installation
Linksys
4
When your Mac restarts you’re done with installation of the USB Ethernet
Adapter.
For more information about networking under OS X, refer to your Mac OS X
documentation.
5
Appendix A: Troubleshooting
Linksys
5
Appendix A: Troubleshooting
Your computer does not recognize the adapter.
Make sure that the adapter is properly inserted into the USB slot.
The adapter does not work properly.
Remove the adapter, and reinsert it into the computer’s USB slot.
WEB: If your questions are not addressed here, refer to the Linksys
website, www.linksys.com
6
Appendix B: Specifications
Linksys
6
Appendix B: Specifications
Model
USB3GIG USB Ethernet Adapter
Standards
USB 1.0, USB 1.1, USB 2.0, USB 3.0
IEEE 802.3, IEEE 802.3u
Ports
One USB Type-A Male Connector, One RJ-45 Gigabit Port
Cabling Type
Cat 5 Ethernet Cable
LEDs
Link/Activity
Environmental
Dimensions*
7.96” x 1.00” x 0.69”
(202.3 x 25.35 x 17.65 mm)
Weight**
0.8 oz (23 g)
Power
3.3 V low power consumption
Certification
FCC Class B, CE Class B
Operating Temp.
32 to 158ºF (0 to 70ºC)
Storage Temp.
32 to 158ºF (0 to 70ºC)
Operating Humidity
10 to 90% Noncondensing
Storage Humidity
10 to 90% Noncondensing
* With cap removed and cable fully extended
** With cap attached
Visit linksys.com/support for award-winning
technical support
© 2014 Belkin International, Inc. and/or its affiliates. All rights reserved.
BELKIN, LINKSYS and many product names and logos are trademarks
of the Belkin group of companies. Third-party trademarks mentioned are
the property of their respective owners.
LNKPG-00103 Rev. A01
Inhaltsverzeichnis
Andere Linksys Adapter Handbücher
Linksys
Linksys WPC55AG Bedienungsanleitung
Linksys
Linksys PAP2-T Original Betriebsanleitung
Linksys
Linksys WBP54G Bedienungsanleitung
Linksys
Linksys PCM1000 - Cisco 10/100/1000 CARDBUS MOBILE... Original Betriebsanleitung
Linksys
Linksys WGA600N - Wireless-N Gaming Adapter Bridge Bedienungsanleitung
Linksys
Linksys WMA11B - Wireless-B Media Adapter Bedienungsanleitung
Linksys
Linksys WPC300N-RM - Refurb Wireless N Notebook Adp Bedienungsanleitung
Linksys
Linksys PLE200 - PowerLine AV EN Adapter Bridge Original Betriebsanleitung
Linksys
Linksys WPC54G EU Bedienungsanleitung
Linksys
Linksys USBVPN1 Original Betriebsanleitung
Linksys
Linksys PAP2-T Bedienungsanleitung
Linksys
Linksys WUSB54AG Bedienungsanleitung
Linksys
Linksys WPC4400N Original Betriebsanleitung
Linksys
Linksys LINKSYS WMP300N Bedienungsanleitung
Linksys
Linksys PAP2T-NA Service-Handbuch
Linksys
Linksys WUSB300N Original Betriebsanleitung
Linksys
Linksys WGA54AG Original Betriebsanleitung
Linksys
Linksys WPC54GX4 Bedienungsanleitung
Linksys
Linksys WUSB54AG Bedienungsanleitung
Linksys
Linksys WPC54G EU Bedienungsanleitung
