Linksys WUSB54AG Bedienungsanleitung

Instant Wireless® Series

WirelessA/GUSBNetwork

Adapter

Use this guide to install:

WUSB54AG

User Guide

Rights Reserved. Instant Wireless, Linksys, and the Linksys logo are registered

trademarks ofLinksys Group, Inc. Microsoft, Windows, and the Windows logo are

registered trademarksof Microsoft Corporation. All other trademarks and brand names

are the propertyof their respective proprietors.

LIMITED WARRANTY

Linksys guarantees that every Instant Wireless® Dual-Band Wireless A+G PCI

Adapter will be free from physical defects in material and workmanship for three year

from the date of purchase, when used within the limits set forth in the Specifications

chapter of this User Guide.

This Warranty is valid and may be processed only in the country of purchase.

If the product proves defective during this warranty period, go to the Linksys website

at www.linksys.com for complete RMA (Return Merchandise Authorization)

assistance. You can also call Linksys Technical Support in order to obtain a RMA

Number. BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BARCODE

FROM THE PRODUCT’S PACKAGING ON HAND WHEN CALLING. RETURN

REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. When

returning a product, mark the RMA Number clearly on the outside of the package and

include a copy of your original proof of purchase.

All customers located outside of the United States of America and Canada shall

be held responsible for shipping and handling charges.

IN NO EVENT SHALL LINKSYS'S LIABILITY EXCEED THE PRICE PAID FOR THE

PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT,

ITS ACCOMPANYING SOFTWARE, OR ITS DOCUMENTATION. LINKSYS

OFFERS NO REFUNDS FOR ITS PRODUCTS.

Linksys makes no warranty or representation, expressed, implied, or statutory,

with respect to its products or the contents or use of this documentation and all

accompanying software, and specifically disclaims its quality, performance,

merchantability, or fitness for any particular purpose. Linksys reserves the right to

revise or update its products, software, or documentation without obligation to notify

any individual or entity.

Please direct all inquiries to:

Linksys P.O. Box 18558, Irvine, CA 92623.

SAFETY AND REGULATORY NOTICES

FCC STATEMENT

The Instant Wireless Wireless A/G USB Network Adapter has been tested and found

to comply with the specifications for a Class B digital device, pursuant to Part 15 of the

FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may

cause undesired operation.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used according to the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which is

found by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment or devices

• Connect the equipment to an outlet other than the receiver's

• Consult a dealer or an experienced radio/TV technician for assistance

FCC Caution: Any change or modification to the product not expressly approved by

Linksys could void the user's authority to operate the device.

FCC Caution: Operation within the 5150 to 5250GHz band is restricted to indoor use

only.

FCC RF Radiation Exposure Statement

To comply with the FCC and ANSI C95.1 RF exposure limits, the antenna(s) for this

device must comply with the following:

• Access points with 2.4 GHz or 5 GHz integrated antenna must operate with a

separation distance of at least 20 cm from all persons using the cable provided and

must not be co-located or operating in conjunction with any other antenna or

transmitter.

End-users must be provided with specific operations for satisfying RF exposure

compliance.

Note: Dual antennas used for diversity operation are not considered co-located.

INDUSTRY CANADA (CANADA)

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

The use of this device in a system operating either partially or completely outdoors

may require the user to obtain a license for the system according to the Canadian regulations.

Cisco-Linksys, LLC declares that WUSB55AG ( FCC ID: Q87-WUSB54AG ) 

is limited in CH1~CH11 for 2.4GHz by specified firmware controlled in U.S.A.

EC DECLARATION OF CONFORMITY (EUROPE)

Linksys Group declares that the Instant Wireless® Series products included in the

Instant Wireless® Series conform to the specifications listed below, following the

provisions of the European R&TTE directive 1999/5/EC, EMC directive 89/336/EEC,

and Low Voltage directive 73/23/EEC:

For 11Mbps, 2.4 GHz devices with 100 mW radios, the following standards were

applied:

• ETS 300-826, 301 489-1 General EMC requirements for Radio equipment.

• EN 609 50 Safety

• ETS 300-328-2 Technical requirements for Radio equipment.

For 54Mbps, 5 GHz devices with 40 mW radios, the following standards were applied:

• ETS 301 489-1, 301 489-17 General EMC requirements for Radio equipment.

• EN 609 50 Safety

• ETS 301-893 Technical requirements for Radio equipment.

Caution: The frequencies used by 802.11a wireless LAN devices are not yet

harmonized within the European community, 802.11a products are designed for use

only in specific countries, and are not allowed to be operated in countries other than

those of designated use. Contact local Authority for procedure to follow.

Caution: This equipment is intended to be used in all EU and EFTA countries.

Outdoor

use may be restricted to certain frequencies and/or may require a license for

operation.

Contact local Authority for procedure to follow.

Note: Combinations of power levels and antennas resulting in a radiated power level

of above 100 mW equivalent isotropic radiated power (EIRP) are considered as not

compliant with the above mentioned directive and are not allowed for use within the

European community and countries that have adopted the European R&TTE directive

1999/5/EC and/or the CEPT recommendation Rec 70.03.

For more details on legal combinations of power levels and antennas, contact Linksys

Corporate Compliance.

• Linksys Group vakuuttaa täten että Instant Wireless Wireless A/G USB Network

Adapter tyyppinen laite on direktiivin 1999/5/EY, direktiivin 89/336/EEC ja direktiivin

73/23/EEC oleellisten vaatimusten ja sitä koskevien näiden direktiivien muiden

ehtojen mukainen.

• Linksys Group déclare que la Instant Wireless Wireless A/G USB Network Adapter

est conforme aux conditions essentielles et aux dispositions relatives à la directive

1999/5/EC, la directive 89/336/EEC, et à la directive 73/23/EEC.

To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems) 

this device is intended to be operated indoors and away from windows to provide maximum 

shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.

Because high power radars are allocated as primary users (meaning they have priority) in 

5250-5350 MHz, these radars could cause interference and/or damage to license exempt LAN 

devices.

• Belgique B L'utilisation en extérieur est autorisé sur le canal 11 (2462 MHz), 12

(2467 MHz), et 13 (2472 MHz). Dans le cas d'une utilisation privée, à l'extérieur d'un

bâtiment, au-dessus d'un espace public, aucun enregistrement n'est nécessaire pour

une distance de moins de 300m. Pour une distance supérieure à 300m un

enregistrement auprès de l'IBPT est requise. Pour une utilisation publique à l'extérieur

de bâtiments, une licence de l'IBPT est requise. Pour les enregistrements et licences,

veuillez contacter l'IBPT.

• France F:

2.4 GHz Bande : les canaux 10, 11, 12, 13 (2457, 2462, 2467, et 2472 MHz

respectivement)

sont complétement libres d'utilisation en France (en utilisation intérieur).

Pour ce qui est des autres canaux, ils peuvent être soumis à autorisation selon le

départment. L'utilisation en extérieur est soumis à autorisation préalable et très

restreint.

5 GHz Bande: Conformément aux décisions de la CEPT, l'utilisation des fréquences

de la bande 5150 MHz - 5350 MHz est autorisée à l'intérieur des bâtiments avec une

puissance maximale de 200 mW, et interdite en extérieur. La bande 5470 MHz - 5725

MHz n'est pas ouverte aujourd'hui.

Vous pouvez contacter l'Autorité de Régulation des Télécommunications

(http://www.art-telecom.fr) pour de plus amples renseignements.

2.4 GHz Band: only channels 10, 11, 12, 13 (2457, 2462, 2467, and 2472 MHz

respectively) may be used freely in France for indoor use. License required for

outdoor installations.

5 GHz Band: frequencies in the 5150 MHz - 5350 MHz band may be used indoor

with maximum power of 200 mW. Their use is forbidden outdoors. The 5470 MHz -

5725 MHz band is not currently open.

Please contact ART (http://www.art-telecom.fr) for procedure to follow.

• Deutschland D: Anmeldung im Outdoor-Bereich notwending, aber nicht

genehmigungspflichtig.

Bitte mit Händler die Vorgehensweise abstimmen.

• Germany D: License required for outdoor installations. Check with reseller for

procedure to follow.

• Italia I: E' necessaria la concessione ministeriale anche per l'uso interno. Verificare

con i rivenditori la procedura da seguire. L'uso per installazione in esterni non e'

permessa.

• Italy I: License required for indoor use. Use with outdoor installations not allowed.

• The Netherlands NL License required for outdoor installations. Check with reseller

for

procedure to follow.

• Nederlands NL Licentie verplicht voor gebruik met buitenantennes. Neem contact op

met verkoper voor juiste procedure.

TableofContents

Chapter1:Introduction

Chapter 2: Planning Your Wireless Network

Chapter 3: Getting to Know the Wireless A/G USB Network Adapter

Chapter4:SoftwareInstallationandConfigurationforWindows2000

Chapter 5: Hardware Installation

Chapter 6: Driver Installation for Windows XP

Appendix A: Troubleshooting

CommonProblemsandSolutions

FrequentlyAskedQuestions

Appendix B: Glossary

AppendixC:Specifications

Environmental

AppendixD:WarrantyInformation

AppendixE:ContactInformation

Chapter1:Introduction

The Linksys Wireless A/G USB Network Adapter installs in most desktops

and lets you put your computer almost anywhere in the building, without the

cost and hassle of running network cables. Now you don’t have to drill holes

in your walls and climb through the attic or cellar to get connected to the network.

Once you’re connected, you can keep in touch with your e-mail, access

the Internet, use instant messaging to chat with friends, and share files and

other resources such as printers and network storage with other computers on

the network.

The Wireless A/G USB Network Adapter connects you with Wireless-A

(802.11a) and Wireless-G (draft 802.11g) networks at an incredible 54Mbps!

And for added versatility, it can also interoperate with all the 11Mbps Wireless-

B (802.11b) products found in homes, businesses, and public wireless hotspots

around the country. And whichever mode you choose, your wireless communications

are protected by up to 152-bit encryption, so your data stays secure.

So don’t hassle with running cables through your house—get your desktop connected

the easy way with the versatile Linksys Wireless A/G USB Network Adapter .

• One Adapter Connects to Either 2.4GHz (802.11b or Draft 802.11g) or

5GHz (802.11a) Networks

• Advanced Security Features with up to 152-Bit WEP Encryption

• Easy-to-Use Setup Wizard

• Detailed Monitoring and Performance Utility

• IEEE 802.11a, 802.11b, and Draft 802.11g Compliant

• Free Technical Support—24 Hours a Day, 7 Days a Week, Toll-Free US

Calls

• 1-Year Limited Warranty

Chapter2:PlanningYourWireless

Network

A wireless local area network (WLAN) is exactly like a regular local area network

(LAN), except that each computer in the WLAN uses a wireless device to

connect to the network. Computers in a WLAN share the same frequency channel

and SSID, which is an identification name for wireless devices.

Unlike wired networks, wireless networks have two different modes in which

they may be set up: infrastructure and ad-hoc. An infrastructure configuration

is a WLAN and wired LAN communicating to each other through an

access point. An ad-hoc configuration is wireless-equipped computers communicating

directly with each other. Choosing between these two modes

depends on whether or not the wireless network needs to share data or peripherals

with a wired network or not.

Figure 2-1.

If the computers on the wireless network need to be accessed by a wired network or need to share a

peripheral, such as a printer, with the wired network computers, the wireless network should be set up

in infrastructure mode. (See Figure 2-1.) The basis of infrastructure mode centers around an

access point, which serves as the main point of communications in a wireless network. Access points

transmit data to PCs equipped with wireless network cards, which can roam within a certain radial

range of the access point. Multiple access points can be arranged to work in succession to extend the

roaming range, and can be set up to communicate with your Ethernet (wired) hardware as well.

If the wireless network is relatively small and needs to share resources only with the other computers

on the wireless network, then the ad-hoc mode can be used. (See Figure 2-2.) Ad-hoc mode allows

computers equipped with wireless transmitters and receivers to communicate directly with each other,

eliminating the need for an access point. The drawback of this mode is that, in Ad-Hoc mode,

wireless-equipped computers are not able to communicate with computers on a wired network. And, of

course, communication between the wireless-equipped computers is limited by the distance and

interference directly between them.

Figure 2-2

Chapter3:GettingtoKnowthe

WirelessA/GUSBNetworkAdapter

The Network Adapter is connected to your PC through its USB port. All power

is provided through the USB connection, making a power adapter unnecessary.

The Network Adapter’s LEDs show you how the Adapter is functioning.

Power Green. This LED will light up to let you know that the Adapter is

adequately powered over the USB connection.

Link Green. The Link LED will be lit steadily when the Network

Adapter is connected to your wireless network. The LED will

blink when there is wireless network traffic.

Chapter4:SoftwareInstallationand

ConfigurationforWindows2000

The Wireless A/G USB Network Adapter Setup Wizard will guide you through the installation

procedure. The Setup Wizard will install the WLAN Monitor and driver, as well as configure the

Adapter.

1. Insert the Setup Wizard CD-ROM into your CD-ROM drive. The Setup Wizard should run

automatically. If it does not, click the Start button and choose Run. In the field that appears, enter

D:\setup.exe (if “D” is the letter of your CD-ROM drive).

2. Read the License Agreement and click the Next button to continue the installation. If you click the

Cancel button, you will end the installation.

3. The following screen will ask for some information about your wireless network. In the SSID field,

enter your network’s SSID (Service Set Identifier). The SSID is your network name and must be

identical for all devices in the network. The default setting is linksys (all lowercase).

Next, choose a wireless mode. Click the Infrastructure Mode radio button if you want your wireless

computers to network with computers on your wired network using a wireless access point. Click the

Ad-Hoc Mode radio button if you want multiple wireless computers to network directly with each

other.

Click the Next button to continue, or click the Back button to return to the previous page.

4. If you chose I n f r a s t r u c t u r e

Mode, go to Step 5 now. If you chose Ad-Hoc Mode, select the correct operating channel for your

network from the Channel dropdown menu.

Then, select the Network Mode from the dropdown

menu. Click the Next button, and go to Step 5. Click the Back button to change any settings.

Channel - The channel you choose should match the channel set on the other devices in your wireless

network. If you are unsure about which channel to use, select the default channel (Channel 6).

Network Mode - Keep the default setting, Mixed, if you have Wireless-A and Wireless-G devices in

your network.

5. The Setup Wizard will ask you to review your settings before it starts to copy files. Click the Next

button to save these settings, or click the Back button to change any settings.

6. At this point, you may see a warning screen, such as that asking if you’d like to

cease installation. You can click the Yes button to continue; the Adapter will function properly.

7. After the files have been successfully copied. Click the Exit button.

Proceed to “Chapter 5: Hardware Installation.”

Chapter5:HardwareInstallation

Important for Windows 2000 users: You must run the Setup Wizard

to install the software before installing the hardware.

Important for Windows XP users: You must install the Adapter’s

hardware before installing the software.

1. The Adapter comes with the USB cable you will use to connect the Adapter

to your PC. (See Figure 5-1.)

Figure 5-1

2. Connect one end of the USB cable to the USB port of the Adapter.

3. Connect the other end of the USB cable to one of the USB

ports on your computer (see Figure 5-2).

Figure 5-2

4. When Windows 2000 begins installing the Network Adapter’s driver file, a

screen similar to that shown in Figure 5-3 will appear, stating that a digital

signature was not found. This software has been tested and found to work

properly with Windows 2000. Click the Yes button to continue installation.

Figure 5-3

Andere Handbücher für WUSB54AG

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Linksys Adapter Handbücher

Linksys

Linksys WGA11B Bedienungsanleitung

Linksys

Linksys WPC54GS - Refurb Wrls-g Notebook Adr Spdbstr No... Bedienungsanleitung

Linksys

Linksys SPA-1001 Bedienungsanleitung

Linksys

Linksys WUSB54GC EU Bedienungsanleitung

Linksys

Linksys WPC54G EU Original Betriebsanleitung

Linksys

Linksys WGA600N - Wireless-N Gaming Adapter Bridge Bedienungsanleitung

Linksys

Linksys Instant Broadband Series Bedienungsanleitung

Linksys

Linksys WGA54G Original Betriebsanleitung

Linksys

Linksys USB100TX - EtherFast 10/100 USB Network... Bedienungsanleitung

Linksys

Linksys WMCE54AG - Wireless A/G Media Center... Bedienungsanleitung

Linksys

Linksys Small Business SPA2102 Bedienungsanleitung

Linksys

Linksys Small Business SPA2102 Bedienungsanleitung

Linksys

Linksys PAP2 Bedienungsanleitung

Linksys

Linksys WPC100 - Rangeplus Wireless G Pc Card Bedienungsanleitung

Linksys

Linksys PAP2-T Bedienungsanleitung

Linksys

Linksys Instant PowerLine PLUSB10 Original Betriebsanleitung

Linksys

Linksys WPC54GS - Refurb Wrls-g Notebook Adr Spdbstr No... Bedienungsanleitung

Linksys

Linksys WUSB54GC EU Bedienungsanleitung

Linksys

Linksys WUSB6300 Bedienungsanleitung

Linksys

Linksys WPC54G EU Bedienungsanleitung

Linksys

Linksys WPC600N - Ultra RangePlus Wireless-N PC Card Bedienungsanleitung

Linksys

Linksys WUSB54G Bedienungsanleitung

Linksys

Linksys WPC600N - Ultra RangePlus Wireless-N PC Card Bedienungsanleitung

Linksys

Linksys Wireless-G Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung