Linksys Compact USB 2.0 Bedienungsanleitung

Instant EtherFast®Series

Compact USB 2.0

10/100 Network

Adapter

Use this guide to install:

USB200M

User Guide

trademarks of Linksys. Microsoft, Windows, and the Windows logo are registered trade-

marks of Microsoft Corporation. All other trademarks and brand names are the proper-

ty of their respective proprietors.

LIMITED WARRANTY

Linksys guarantees that every Compact USB 2.0 10/100 Network Adapter will be free

from physical defects in material and workmanship for one year from the date of pur-

chase, when used within the limits set forth in the Specifications section of this User

Guide. If the product proves defective during this warranty period, call Linksys Technical

Support in order to obtain a Return Authorization Number. BE SURE TO HAVE YOUR

PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCT'S PACKAGING ON

HAND WHEN CALLING. When returning a product, mark the Return Authorization

Number clearly on the outside of the package and include a copy of your original proof

of purchase. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF

PURCHASE. All customers located outside the United States of America and Canada

shall be held responsible for shipping and handling charges.

IN NO EVENT SHALL LINKSYS’S LIABILITY EXCEED THE PRICE PAID FOR THE PROD-

UCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAM-

AGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFT-

WARE, OR ITS DOCUMENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANY

PRODUCT. Linksys makes no warranty or representation, expressed, implied, or statuto-

ry, with respect to its products or the contents or use of this documentation and all

accompanying software, and specifically disclaims its quality, performance, mer-

chantability, or fitness for any particular purpose. Linksys reserves the right to revise or

update its products, software, or documentation without obligation to notify any individ-

ual or entity. Please direct all inquiries to:

Linksys P.O. Box 18558, Irvine, CA 92623.

FCC STATEMENT

This Compact USB 2.0 10/100 Network Adapter has been tested and complies with the

specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used according to the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which is found by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment or devices

• Connect the equipment to an outlet other than the receiver’s

• Consult a dealer or an experienced radio/TV technician for assistance

UG-USB200M-092602NC JL

EC Declaration of Conformity (Europe)

In compliance with the EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC, and

Amendment Directive 93/68/EEC, this product meets the requirements of the following

standards:

• EN55022 Emission

• EN55024 Immunity

Industry Canada (Canada)

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe (B) est conforme à la norme NMB-003 du Canada.

Instant EtherFast® Series

Table of Contents

Chapter 1: Introduction 1

The Compact USB 2.0 10/100 Network Adapter 1

Features 1

Package Contents 2

Minimum Requirements 2

Chapter 2: About USB 3

Overview 3

USB 2.0 3

USB Icon 3

USB Cabling 4

Chapter 3: Getting to Know the Compact

USB 2.0 10/100 Network Adapter 5

The Adapter’s Ports and LEDs 5

Chapter 4: Connecting the Compact

USB 2.0 10/100 Network Adapter 6

Chapter 5: Windows 98 Installation and Setup 7

Overview 7

Windows 98 Driver Installation 7

Windows 98 Network Configuration 10

Compact USB 2.0 10/100 NetworkAdapter

Chapter 6: Windows Millennium Installation

and Setup 15

Overview 15

Windows Millennium Driver Installation 15

Windows Millennium Network Configuration 18

Chapter 7: Windows 2000 Installation 23

Overview 23

Windows 2000 Driver Installation 23

Chapter 8: Windows XP Installation 26

Overview 26

Windows XP Driver Installation 26

Appendix A: Troubleshooting 29

Appendix B: Client for Microsoft Setup for

Windows 98 35

Appendix C: Starting Over in Windows 98 36

Appendix D: Manually Installing Network

Components in Windows 98 38

Client for Microsoft Networks 38

Client for NetWare Networks 39

IPX/SPX-compatible Protocol 39

NetBEUI 40

TCP/IP 40

Instant EtherFast® Series

Appendix E: Linux, Open Source, and Beta

Operating Systems 41

Appendix F: Glossary 42

Appendix G: Specifications 48

Environmental 48

Appendix H: Warranty Information 49

Appendix I: Contact Information 50

Compact USB 2.0 10/100 NetworkAdapter

Chapter 1: Introduction

Now you can connect to any 10/100 Ethernet network without having to open

your PC. And with the power of USB 2.0, you’ll connect at the full speed your

network supports. The Compact USB 2.0 10/100 Network Adapter from

Linksys works with any USB 1.1 or 2.0 equipped desktop or notebook PC, run-

ning any version of Windows that supports USB.

This tiny, Plug-and-Play compatible device attaches directly to a USB port on

your PC or hub via a standard USB Type A connector. Simply connect a

Category 5 Ethernet network cable into the Compact USB 2.0 10/100 Network

Adapter’s RJ-45 port, install the included device driver, and you’re networked.

The Compact USB 2.0 10/100 Network Adapter is bus-powered, drawing

power from the host PC, so it requires no external power cord. It features easy-

to-read LEDs, a compact design, a 1-year limited warranty, and free world-

class technical support.

• Connects at a Full 100Mbps via USB 2.0, up to 8 Times Faster than a USB

1.1 Adapter

• Compact Size for Greater Flexibility

• Also Compatible with USB 1.1 Desktop and Notebook Computers

• Plug-and-Play Compatible with Windows 98, 2000, Millennium, and XP

• One Male, Type A, USB Connector

• One RJ-45, 10/100 Port for Network Connectivity

• Powered by Host PC so No External Power Supply is Needed

• Compact Design—Perfect for Use with Notebook PCs

• RJ-45 Network Port Connects to Any 10/100Mbps Hub or Switch

• Backward Compatible with USB 1.0/1.1 USB Ports

• Plug-and-Play Compatible with Windows 98, Millennium, 2000, and XP for

Easy Installation

Features

The Compact USB 2.0 10/100 Network Adapter

Compact USB 2.0 10/100 NetworkAdapter

Instant EtherFast® Series

• One Compact USB 2.0 10/100 Network Adapter

• One Driver Installation CD with User Guide included

• One USB Coupler

• One Quick Installation guide

• One Registration Card

One PC with the following:

• 200MHz or Faster Processor

• 64MB RAM Recommended

• Available USB Port (USB 2.0 for maximum throughput)

• CD-ROM Drive

• Windows 98, Millennium, 2000, or XP

Package Contents

Minimum Requirements

Figure 1-1

Chapter 2:About USB

USB, which is short for Universal Serial Bus, is a technology designed to

make connecting devices to computers easier. First developed in 1996 by a

group of computer industry leaders that included Compaq, Digital, IBM, Intel,

Microsoft, NEC, and Northern Telecom, USB is one of the most widely used

technologies for users who want to add peripherals to their computers.

USB is unique because it is Plug-and-Play, which allows a computer to instant-

ly recognize when a device like a keyboard, mouse, or scanner has been con-

nected to it. Once the device has been recognized, it’s ready to go—no special

setup is required. Similarly, USB supports hot-swapping, the insertion or

removal of devices while the computer is turned on.

The USB 1.1 standard supports two speed modes, 1.5 and up to 12Mbps. The

newest USB standard, USB 2.0, supports three speed modes: 1.5, 12, and up to

480Mbps. The new USB 2.0 devices are fully backward compatible with earli-

er USB devices. USB 2.0 offers you increased functionality and additional

bandwidth, allowing you to add more peripherals to your computers.

The USB icon marks a USB port on a PC or device.

Figure 2-1

Overview

USB Icon

USB 2.0

There are two kinds of USB connectors, Type A and Type B. Type A is a rec-

tangular connector, and Type B is a square connector.

The USB extension cable that comes with the Adapter has Type A connectors

on both ends. One is a male Type A connector that plugs into the PC’s USB

port, and the other is a female Type A connector that plugs into the Adapter.

Figure 2-4 shows two USB ports as they might appear on your

computer. Note the two USB icons marking the ports.

Compact USB 2.0 10/100 NetworkAdapter

Chapter 3: Getting to Know the

Compact USB2.0 10/100

Network Adapter

The Ports

USB Port The USB port is a Type A connector. Connect the USB extension

cable from your PC or hub to this port.

RJ-45 Port The RJ-45 port connects the Adapter to a Category 5 Ethernet

network cable.

The LED Indicators

100/ACT Green. The LED lights up when there is a connection to a

100Mbps network. It flashes when the computer is transmitting

or receiving data at 100Mbps.

F/H Green. The LED lights up when the Adapter is operating in full-

duplex mode. The LED is off when the Adapter is operating in

half-duplex mode.

10/ACT Green. The LED lights up when there is a connection to a

10Mbps network. It flashes when the computer is transmitting or

receiving data at 10Mbps.

Instant EtherFast® Series

The Adapter’s Ports and LEDs

Figure 3-1

USB Type A USB Type B

Figure 2-2

USB Cabling

Figure 2-4

Figure 2-3

Male USB Type A Female USB Type A

Compact USB 2.0 10/100 NetworkAdapter

Instant EtherFast® Series

Chapter 5: Windows 98

Installation and Setup

After physically connecting the Adapter to your computer’s USB port or hub,

follow these instructions to install the hardware device driver. The installation

procedure for the hardware device driver may vary slightly depending on which

version of Windows 98 you are using, and on your current system configura-

tion. If at any time during the installation you encounter problems, consult

“Appendix A: Troubleshooting.”

1. If you haven’t already, start your computer.

2. Windows 98 will automatically detect the Adapter connected to your PC.

When the first Add New Hardware Wizard screen appears, insert the Driver

CD into your CD-ROM drive, and click the Next button.

3. Select Search for the best driver for your device (Recommended), and

click the Next button.

Windows 98 Driver Installation

Note: Throughout this guide, it is assumed that “D” is the letter of

your CD-ROM drive.

Overview

Figure 5-1

Chapter 4:Connecting the

Compact USB 2.010/100

Network Adapter

1. With your PC turned off, insert the Adapter’s USB end (or the end of the

USB extension cable connected to the Adapter) into your PC’s USB port or

USB hub.

2. Insert one end of an Ethernet network cable into the Adapter’s RJ-45 port.

3. Insert the other end of the Ethernet network cable into an Ethernet net-

working device.

The hardware installation is complete.

To install the Adapter’s driver, proceed to the chapter for theWindows

operating system your PC is running.

Figure 4-1

Note: For maximum speed, connect theAdapter to a USB 2.0 port on

your PC. If you are using a hub, make sure it is a USB 2.0 hub.

Compact USB 2.0 10/100 NetworkAdapter

6. Windows will begin copying the driver files to your computer. If Windows

asks you for the original Windows CD-ROM, insert the CD-ROM, and

direct Windows to the proper location for the CD-ROM (e.g., D:\). If you

have the Windows 98 setup files already installed in a directory, click OK,

and enter C:\windows\options\cabs (if “C” is the letter of your hard drive)

in the windows that appears. When Windows has completed copying the

files, click the Finish button.

7. When asked if you want to restart your computer, remove the Driver CD

from the CD-ROM drive, and click the Yes button. If Windows does not ask

you to restart your PC, click Start. Choose Shut Down, and select Restart.

Then click the OK button.

Congratulations! The installation of the Compact USB 2.0 10/100

NetworkAdapter is complete.

To enable file and printer sharing, go to the next section,

“Windows 98 Network Configuration.”

Instant EtherFast® Series

Figure 5-4

4. Select Specify a location: to find the correct driver, and enter D:\win98 in

the field provided. Click the Next button to continue.

5. When Windows notifies you that it is ready to install the driver files, click

the Next button to continue.

Note: Do not click Cancel at any time during the installation

process. Doing so will prevent your driver from being properly

installed on your PC.

Figure 5-2

Figure 5-3

Compact USB 2.0 10/100 NetworkAdapter

4. If you’d like others to be able to access the files on your PC’s hard drive,

select I want to be able to give others access to my files.

If you’d like to share your printer with other users on the network, select I

want to be able to allow others to print to my printer(s).

5. Click the OK button.

File and printer shar-

ing for Microsoft

Networks should now

appear in the list of

installed components.

Instant EtherFast® Series

If you are installing the Adapter in a Windows 98 PC that is used in an NT

domain, go to “Appendix B: Client for Microsoft Setup for Windows 98.”

1. From the Windows 98 desktop, right-click the Network Neighborhood

icon. Then click Properties.

2. The Network screen will appear. Click the Configuration tab. A screen

similar to Figure 5-5 will appear.

3. Click the File and Print Sharing button. The File and Print Sharing

screen will appear.

Figure 5-6

Figure 5-7

Note: If you do not enable file and print sharing, your PC will be

invisible on the network and inaccessible to other users.

Windows 98 Network Configuration

Figure 5-5

Note: Linksys does not provide technical support or troubleshooting

for network configuration.

Compact USB 2.0 10/100 NetworkAdapter

10. From the Access Control tab, you can set the level of access that network

users will have to this computer.

11. Click the OK button. Your system may ask you for your Windows 98 CD-

ROM or the location of the Windows 98 installation files. If it does, direct

Windows to the appropriate location (e.g., C:\windows\options\cabs or

D:\win98 if you have the Windows 98 CD-ROM and “D” represents your

CD-ROM drive).

12. After Windows has copied the necessary files, the System Settings Change

screen will appear. Remove all disks and CDs from your PC, and click the

Yes button to restart your PC. If you don’t see this screen, simply shut down

Windows 98, and restart your PC.

Instant EtherFast® Series

6. From the Primary Network Logon drop-down box, select Client for

Microsoft Networks.

7. Click the Identification tab. Enter the name of your computer in the

Computer name field. Choose a name that is different from the other com-

puter names on the network.

8. Enter the name of your workgroup in the Workgroup field. The workgroup

name should be the same workgroup name used by all of the other PCs on

the network.

9. If you wish, enter a description of your computer in the Computer

Description field.

Figure 5-9

Figure 5-8

Note: Your Computer and Workgroup Names must each have fewer

than 15 alphanumeric characters.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Linksys Netzwerkkarte Handbücher

Linksys

Linksys WGA600N - Wireless-N Gaming Adapter Bridge Bedienungsanleitung

Linksys

Linksys Instant Broadband Series Bedienungsanleitung

Linksys

Linksys USB200M Bedienungsanleitung

Linksys

Linksys LNE2000T Bedienungsanleitung

Linksys

Linksys EtherFast LNE100TX ver. 5 Bedienungsanleitung

Linksys

Linksys LINKSYS WMP300N Bedienungsanleitung

Linksys

Linksys EG1064 Bedienungsanleitung

Linksys

Linksys PLE300 Bedienungsanleitung

Linksys

Linksys Wireless USB Network Adapter Gebrauchsanweisung

Linksys

Linksys EC2T Bedienungsanleitung

Linksys

Linksys PCMLM56 - EtherFast - 56 Kbps Network Bedienungsanleitung

Linksys

Linksys WPC11 Bedienungsanleitung

Linksys

Linksys 10/100 LAN Card 10/100 Bedienungsanleitung

Linksys

Linksys WUSB54GP Bedienungsanleitung

Linksys

Linksys CGV2W Bedienungsanleitung

Linksys

Linksys WUSB54GR Original Betriebsanleitung

Linksys

Linksys HPN200 Bedienungsanleitung

Linksys

Linksys WPC100 - Rangeplus Wireless G Pc Card Bedienungsanleitung

Linksys

Linksys USB200HA Bedienungsanleitung

Linksys

Linksys EC1000 Bedienungsanleitung

Linksys

Linksys EC2T Original Betriebsanleitung

Linksys

Linksys EtherFast LNE100TX ver. 5 Bedienungsanleitung

Linksys

Linksys HomeLink HPN100 Bedienungsanleitung

Linksys

Linksys WDT11 Bedienungsanleitung

Beliebte Netzwerkkarte Handbücher anderer Marken

FirstComm

FirstComm OBiWiFi5G Bedienungsanleitung

Sun Microsystems

Sun Microsystems Interface Adapter Bedienungsanleitung

TRENDnet

TRENDnet TU2-ETG Bedienungsanleitung

YASKAWA

YASKAWA SI-EN3 Bedienungsanleitung

Paradyne

Paradyne BitStorm 2600 IP DSLAM Bedienungsanleitung

Belkin

Belkin F5D7050 Bedienungsanleitung

3Com

3Com EtherLink 3C509B Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITX Bedienungsanleitung

Cisco

Cisco MC16E Bedienungsanleitung

Delta Electronics

Delta Electronics Braking Modules VFDB Series Bedienungsanleitung

TwinMOS

TwinMOS Booming Bedienungsanleitung

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Bedienungsanleitung

Buffalo

Buffalo AirStation WLI-PCM-L11GP Bedienungsanleitung

National Instruments

National Instruments NI 9234 Bedienungsanleitung

Hama

Hama 49276 Bedienungsanleitung

Compaq

Compaq Wireless LAN 100 Bedienungsanleitung

Bose

Bose PowerMatch Dante Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITXR Bedienungsanleitung