Linksys WRT54GL - Wireless-G Broadband Router... Kurzanleitung

Firmware Upgrade Procedures:

Linksys WRT54GL v1

fw ddwrt_v24_sp1_std_generic_10011

1. General Information

Make: Linksys

Model: WRT54GL

Hardware Version: any

Firmware Version: ddwrt_v24_sp1_std_generic_10011

MAC Address Info:

WLAN MAC: two higher than LAN MAC.

LAN MAC: labeled on the bottom of the device.

WAN MAC: one higher than LAN MAC.

Example: if the LAN MAC printed on the device is 00:11:DE:AD:BE:EF, then

the WAN MAC is 00:11:DE:AD:BE:F0 and the WLAN MAC is

00:11:DE:AD:BE:F1.

Defaults Settings/Configuration:

Default LAN IP Address: 192.168.1.1

Web Interface Username: root

Default Web Interface Password: admin

IMPORTANT: These instructions assume that the device is already running a stock

ddwrt_v24_sp1_std_generic_10011 firmware. Do not upgrade the device to the ddwrt

firmware if it is running the original Linksys manufacturer’s firmware; instead, see the

ddwrt website for instructions on how to convert the device to run the ddwrt firmware

(you must first upgrade to a “mini” ddwrt firmware).

2. Wired Upgrade Procedure

Prerequisites:

•client computer with ethernet interface and firmware file

•ethernet cable

•device LAN IP address (referred to below as <Device_LAN_IP_Address>)

•device web interface password

Limitations: if the device is running a CB firmware, under certain situations you may

need to reference the CB User’s Manual to perform a firmware upgrade.

Firmware Filename: dd-wrt.v24_std_generic_[X].bin (where [X] is an optional

string)

Instructions:

•Connect a wired (ethernet) client with DHCP enabled to a LAN port on the device

with an ethernet cable. If you are not served an IP address by the device, you will

need to determine the device LAN IP address (see next step) and manually assign

the wired client an IP address in the same subnet as the device LAN IP address.

For example, if the device LAN IP address is 192.168.1.1, assign yourself an IP

address of 192.168.1.11.

•Determine the <Device_LAN_IP_Address>. If the device is running DHCP, the

device LAN IP address is likely the default gateway of your connected client;

otherwise, if the device LAN IP address is not the default LAN IP address listed

above, the device LAN IP address can be retrieved in wireless sniffer capture data

(e.g., kismet).

•Log on to the device’s web interface by opening a web browser and pointing it to

http://<Device_LAN_IP_Address>, where “<Device_LAN_IP_Address>” is the

device IP address determined from the previous step (i.e., not the literal string

“<Device_LAN_IP_Address>”). For example, if the <Device_LAN_IP_Address>

is 192.168.1.1, use http://192.168.1.1.

•At the login prompt, enter the web interface password and click OK.

•Then click the “Administration” link on the upper right tab.

•Then click the “Firmware Upgrade” tab.

•Click the “Browse…” button and browse to the dd-wrt.v24_std_generic_[X].bin

firmware file on the client computer.

•Click the “Upgrade” button.

•Watch the interface for any additional steps/error messages/information.

Reboots Automatically After Upgrade: Yes

Approximate Upgrade Time: 130 seconds

Known Issues: None

3. Wireless Upgrade Procedure

Prerequisites:

•client computer with 802.11 wireless client card (or built-in 802.11 client

hardware).

•wireless encryption (WEP, WPA, or WPA2) key (if wireless security is enabled)

•device LAN IP address (referred to below as <Device_LAN_IP_Address>)

•device web interface password

Limitations: None

Firmware Filename: dd-wrt.v24_std_generic_[X].bin (where [X] is an optional string)

Instructions:

•Connect/associate the wireless (802.11) client computer (with DHCP enabled) to

the device. If wireless encryption (WEP, WPA, or WPA2) is enabled on the

device, enter the key when prompted. If you are not served an IP address by the

device, you will need to determine the device LAN IP address (see next step) and

manually assign the wired client an IP address in the same subnet as the device

LAN IP address. For example, if the device LAN IP address is 192.168.1.1,

assign yourself an IP address of 192.168.1.11.

•Determine the <Device_LAN_IP_Address>. If the device is running DHCP, the

device LAN IP address is likely the default gateway of your connected client;

otherwise, if the device LAN IP address is not the default LAN IP address listed

above, the device LAN IP address can be retrieved in wireless sniffer capture data

(e.g., kismet).

•Log on to the device’s web interface by opening a web browser and pointing it to

http://<Device_LAN_IP_Address>, where “<Device_LAN_IP_Address>” is the

device IP address determined from the previous step (i.e., not the literal string

“<Device_LAN_IP_Address>”). For example, if the <Device_LAN_IP_Address>

is 192.168.1.1, use http://192.168.1.1.

•At the login prompt, enter the web interface password and click OK.

•Then click the “Administration” link on the upper right tab.

•Then click the “Firmware Upgrade” tab.

•Click the “Browse…” button and browse to the dd-wrt.v24_std_generic_[X].bin

firmware file on the client computer.

•Click the “Upgrade” button.

•Watch the interface for any additional steps/error messages/information.

Reboots Automatically After Upgrade: Yes

Approximate Upgrade Time: 130 seconds

Known Issues: None

Andere Handbücher für WRT54GL - Wireless-G Broadband Router...

Inhaltsverzeichnis

Andere Linksys Netzwerk-Router Handbücher

Linksys

Linksys WET54GS5 - Wireless-G EN Bridge Bedienungsanleitung

Linksys

Linksys RVL200 Bedienungsanleitung

Linksys

Linksys RV082 Bedienungsanleitung

Linksys

Linksys R 72 Bedienungsanleitung

Linksys

Linksys EF1324 Bedienungsanleitung

Linksys

Linksys Network Router Betriebsanleitung

Linksys

Linksys BEFN2PS4 - EtherFast Cable/DSL And Voice... Bedienungsanleitung

Linksys

Linksys BEFSR81 - EtherFast Cable/DSL Router Bedienungsanleitung

Linksys

Linksys Etherfast Bedienungsanleitung

Linksys

Linksys MR2000 Series Bedienungsanleitung

Linksys

Linksys WAG120N Bedienungsanleitung

Linksys

Linksys EtherFast EF4124 Bedienungsanleitung

Linksys

Linksys BEFVP41 - EtherFast Cable/DSL VPN Router Bedienungsanleitung

Linksys

Linksys WRT 1900AC Bedienungsanleitung

Linksys

Linksys EA-Series Bedienungsanleitung

Linksys

Linksys MAX-STREAM EA8100 V2 Betriebsanleitung

Linksys

Linksys EA8500-EU Bedienungsanleitung

Linksys

Linksys RV016 Bedienungsanleitung

Linksys

Linksys AC2600 Bedienungsanleitung

Linksys

Linksys WET54G - Wireless-G EN Bridge Bedienungsanleitung

Linksys

Linksys RTP300 - Broadband Router With 2 Phone Ports Bedienungsanleitung

Linksys

Linksys MAX-STREAM EA9500 Betriebsanleitung

Linksys

Linksys Cable/DSL Firewall Router Bedienungsanleitung

Linksys

Linksys Smart Switch LGS3XX Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise