Linksys PPS1UW - EtherFast Wireless-Ready USB PrintServer Print... Original Betriebsanleitung

This sheet will guide you through the basic steps needed to install this

product onto your network. If you have any problems during installation,

refer to the Troubleshooting section of the User Guide.

Installing the Wireless-Ready PrintServer

Connecting the Wireless-Ready PrintServer to Your Network

1. After powering on the Wireless-Ready PrintServer, plug one

end of a UTP Category 5 (or better) cable into the Wireless-

Ready PrintServer’s LAN Port.

2. Connect the other end of the cable into a networked hub or

switch. The distance between the Wireless-Ready

PrintServer and the second device should not exceed 328

feet (100 meters).

3. The LAN LED will become active. If the LAN LED does

not light up, see the User Guide’s Troubleshooting section

for more information.

Connecting a Printer to the Wireless-Ready PrintServer

1. Connect your printer to the Wireless-Ready PrintServer’s

USB port with your USB cable.

2. Power on your printer.

TheAutorun Bi-Admin Management Utility

1. Insert the Setup CD. A built-in autorun will begin the installa-

tion of the Wireless-Ready PrintServer’s Bi-Admin

Management Utility. Click the Install tab to continue.

2. The installation routine will begin to run and display the follow-

ing screen. Close any other programs you might have running

during this installation procedure and click Next to continue or

Cancel to forgo installation.

3. The next screen will request that you choose a destination

folder. You can either use the default folder by clicking Next

or choose an alternate folder by clicking Browse and selecting

a folder from the window that pops up. Click Back to take a

step backward in the installation or Cancel to forgo installa-

tion.

4. The Bi-Admin Management Utility is now installed. Click

OK on the final screen and continue to the next section,

Installing the Wireless-Ready PrintServer’s Drivers for

installing the USB drivers.

Model No.: PPS1UW

EtherFast

Wireless-Ready

USB PrintServer

Instant EtherFast

Series

Quick Installation

Making Connectivity Easier™

Continued on back...

Note: After you have run the Autorun program and installed the

Bi-Admin Management Utility, the Autorun will still run every

time you insert the CD. Do NOT install the Bi-Admin

Management Utility again. Click the EXIT tab to prevent dupli-

cate installation

Installing theWireless-Ready PrintServer’s Drivers

1. To begin driver installation, click Start , select Run, and type

D:\Driver\Win9xnt\AddPort_Linksys.exe (where D is the

letter of your CD-ROM drive) in the Open field that appears.

Click OK.

2. The Install Wizard window appears. Read the text that

appears and click Next.

3. Click Next to accept the default Destination Directory, shown

below (recommended). If you choose to utilize another direc-

tory, click

Browse and

choose the

appropriate

directory.

Then, click

Next.

4. The following screen will assign a Program Folder to the

Windows Taskbar. The default Program Folder is the “Linksys

PrintServer Driver”. If you would like to use another name for

the Program Folder, type it in the Program Folders field or

select one

from the

Existing

Folders

field. Click

Next to

continue.

5. Driver installation is now completed but the Print Driver still

needs to be configured. The Wireless-Ready PrintServer will

not function properly until the Print Driver is configured.

Check the box beside Configure Print Driver Now and click

Finish to continue.

6. Before setting up and configuring the Print Port, follow the

directions on the screen below and click OK to continue.

7. The Print Port Setup screen will display the Wireless-Ready

PrintServer and all of the printers with which it communicates.

Here, you have the option of installing the printer by high-

lighting its description and clicking Next. You can also close

this screen by clicking Close.

8. This will display the Configure Printer Port screen.Any installed

printers will be displayed in the Existing Printers field.You can

install a printer by clicking Add New Printer.

9. The Add New Printer Wizard will come up at this point. Follow

the standard pro-

cedure for adding

printers under

Windows. If you

have any ques-

tions on adding

printers, please

refer to your

Windows docu-

mentation.

10. After your print-

er(s) have been

added, you will

return to the

Configure Printer

Port screen. Click

the Connect but-

ton to connect the

printer(s).

11. The Printer Port Setup screen will appear again, displaying the

printers which are now communicating with theWireless-Ready

PrintServer. Click the Next button to add any more printers or

Close to complete the installation and configuration procedure.

Installation of theWireless-Ready PrintServer is now complete.

For information on configuring the Wireless-Ready PrintServer on

a Windows 95/98/Millennium computer, refer to the Windows 95,

98 and Millennium Port Configuration section in the User Guide.

If you are configuring the Wireless-Ready PrintServer on a

Windows NT 4.0 or 2000 computer, refer to the Windows NT and

2000 Port Configuration section in the User Guide.

QI-PPS1UW-011208A KL

EtherFast

Wireless-Ready USB PrintServer

Model No.: PPS1UW

If theWireless-Ready PrintServer does not appear in this window:

• Windows 95/98/Millennium users - the Wireless-Ready

PrintServer probably does not have an IP address. You can assign one

using the Bi-Admin software. See the section on Bi-Admin:

PrintServer Management in the User Guide. If you know you are

using DHCP through software or your router/hub/switch, try resetting

the Wireless-Ready PrintServer and clicking the Browse button again.

If this does not work, refer to the Troubleshooting section in the User

Guide.

• Windows NT 4.0 or 2000 users - try resetting the Wireless-Ready

PrintServer and clicking the Browse button again. If this does not

work, refer to the Troubleshooting section in the User Guide.

Andere Handbücher für PPS1UW - EtherFast Wireless-Ready USB PrintServer Print...

Andere Linksys Druckserver Handbücher

Linksys

Linksys WPS11 ver. 3 Original Betriebsanleitung

Linksys

Linksys Instant EtherFast EPSX3 Bedienungsanleitung

Linksys

Linksys Instant EtherFast EPSX3 Original Betriebsanleitung

Linksys

Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... Bedienungsanleitung

Linksys

Linksys EFSP42 ver. 2 Bedienungsanleitung

Linksys

Linksys WPS54G - Wireless-G PrintServer Print Server Original Betriebsanleitung

Linksys

Linksys PSUS4 - PrintServer For USB Bedienungsanleitung

Linksys

Linksys WPS11 ver. 3 Bedienungsanleitung

Linksys

Linksys PSUS4 - PrintServer For USB Bedienungsanleitung

Linksys

Linksys WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print... Bedienungsanleitung

Linksys

Linksys EFSP42 ver. 2 Original Betriebsanleitung

Linksys

Linksys PSUS4 - PrintServer For USB Original Betriebsanleitung

Linksys

Linksys WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print... Bedienungsanleitung

Linksys

Linksys WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print... Bedienungsanleitung

Linksys

Linksys PPS1UW - EtherFast Wireless-Ready USB PrintServer Print... Bedienungsanleitung

Linksys

Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... Bedienungsanleitung

Linksys

Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... Bedienungsanleitung

Linksys

Linksys WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print... Bedienungsanleitung

Linksys

Linksys Instant EtherFast EPSX3 Bedienungsanleitung

Linksys

Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... Bedienungsanleitung

Linksys

Linksys WPS54G - Wireless-G PrintServer Print Server Bedienungsanleitung

Linksys

Linksys WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print... Original Betriebsanleitung

Linksys

Linksys WPS54G - Wireless-G PrintServer Print Server Bedienungsanleitung

Linksys

Linksys PPS1UW - EtherFast Wireless-Ready USB PrintServer Print... Bedienungsanleitung

Beliebte Druckserver Handbücher anderer Marken

Digitus

Digitus DN-13003-1 Bedienungsanleitung

Edimax

Edimax PS-1206PWg Bedienungsanleitung

Intellinet

Intellinet 509077 Bedienungsanleitung

Atlantis Land

Atlantis Land NETSERVER A02-PSU_GX02 Bedienungsanleitung

Buffalo

Buffalo LPV4-U2-300S Bedienungsanleitung

Zonet

Zonet ZPS1000 Bedienungsanleitung

TRENDnet

TRENDnet TEW-P11G Bedienungsanleitung

Axis

Axis 140 BJC Bedienungsanleitung

HP Jetdirect 280m - 802.11b Wireless Print... Bedienungsanleitung

MicroNet

MicroNet SP766W Bedienungsanleitung

NETGEAR

NETGEAR PS104 - Hub - EN Bedienungsanleitung

Axis

Axis AXIS 1610 Bedienungsanleitung

Buffalo

Buffalo LPV4-U2-300S Bedienungsanleitung

Axis

Axis 5600+ Bedienungsanleitung

LevelOne

LevelOne WPS-9123 Bedienungsanleitung

NETGEAR

NETGEAR PS105 Bedienungsanleitung

Xerox

Xerox FreeFlow Print Server V9 SP3 Bedienungsanleitung

SEH

SEH primos Bedienungsanleitung