LinkU 201 Bedienungsanleitung
1
Reviewer’s Guide_ March 2017
User Guide _ March 2017
User Guide_ March 2017
Index
This Reviewer’s Guide is designed to help you evaluate the link-U Hybrid SmartCam
3 Setting up your link-U 11
19
4 Onboard Sensors, BLT Sensors and Devices
235 Everyday Operation
24Appendix 1: Firmware Update
26Appendix 2: Worldwide 4G-LTE carriers list
21 Quick Start
82 Preparation, Turn On and Off, Reset
27Appendix 3: First Set-Up via direct-WiFi
User Guide_ March 2017
2
1 Quick Start
1
Quick Start Slide link-U cam front white door.
User Guide_ March 2017
3
2
Quick Start Insert NanoSim and SD memory card (cat. 6 or above).
1 Quick Start
User Guide_ March 2017
4
3
Quick Start Close the door and insert the power plug.
1 Quick Start
User Guide_ March 2017
5
4
Quick Start Dowload the APP and follow instruction.
Camera Default Passwrd: admin.
1 Quick Start
User Guide_ March 2017
6
1 Quick Start
5
Quick Start To Turn Off the camera, press the front button when on battery.
To Reset the camera, press the front button when plugged in.
User Guide_ March 2017
7
1 Quick Start
6
Quick Start For more installation options, removable the stand and use the
standard Photo screw.
User Guide_ March 2017
8
After unpacking the box and identifying its parts, please review the
following steps to operate your link-U:
Open the white front panel by pressing and sliding it off as
shown in the “Step 1” image of the quick start guide on page 3.
Insert the SD Memory Card (up to 32 GB, cat. 6 or above),
Note: link-U will work without an SD Memory Card, but it will not be able to record
videos.
Insert the Nano SIM card (as shown in “Step 2” on page 3), but
make sure the card is not PIN blocked.
You can verify by inserting the NanoSIM card in a Smartphone, and
checking if the device can access the Internet without further action.
The link-U modem is designed to work with several worldwide carriers
(see list in Appendix 2 on page 26). If you’re unsure if your carrier is
Note: Link-U works even without a SIM card installed, but then you can use it only
on Ethernet cabled or Wi-Fi wireless networks.
2 Preparation, Turn On and Off, Reset
Preparation,
Turn On and
Off, Reset 2.1
2.2
User Guide_ March 2017
9
Turn on the camera simply by inserting the Ethernet cable
into the camera and into the “Power Out” port of the PoE Injector,
both provided in the box. This technology allows you to bring both
power and Ethernet network data to the link-U with only one cable.
Note: any standard Ethernet cable can be used to connect the camera
to the PoE injector as well. If you are planning to connect your link-U
to Internet via Ethernet cable, please insert it in the other port of the
Power Injector (as shown in “Step 3”).
Download the “LINK-U” app from the Apple Store or Google
Play Store and install it on your smartphone (see “Step 4”).
For smooth operating, make sure your app and rmware are kept up
to date with the latest versions. Note: from your smartphone, visit our
webapge www.linkucam.com for a quick link to the APP Stores.
If you need to reset the camera to Factory Presets,
open the link-U’s front panel, and press the button located below
the SIM card slot (see “Step 5”).
Do not remove the PoE injector and cable from the plug.
2 Preparation, Turn On and Off, Reset
2.3
2.5
2.4
Preparation,
Turn On and
Off, Reset
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
