Lippert Bed/Table Pedestal V2 Bedienungsanleitung

Bed/Table Pedestal V2

OWNER'S MANUAL

Rev: 05.11.23 Page 2 CCD-0007719

TABLE OF CONTENTS

Introduction 2

Safety 2

Operation 3

Introduction

The Bed/Table Pedestal V2 is used for a table with an OEM-supplied tabletop attached, and then can be

retracted for use as part of a system to create another bed.

Additional information about this product can be obtained from lci1.com/support or by downloading

the free LippertNOW app. The app is available on Apple App Store® for iPhone® and iPad® and also on

Google Play™ for Android™ users.

Apple App Store®, iPhone®, and iPad® are registered trademarks of Apple Inc. Google Play™ and Android™

are trademarks of Google Inc.

For information on the assembly or individual components of this product, please visit:

https://support.lci1.com/lci-interiors

NOTE: Images used in this document are for reference only when assembling, installing and/or operating

this product. Actual appearance of provided and/or purchased parts and assemblies may differ.

Safety

Read and understand all instructions before installing or operating this product. Adhere to all safety labels.

This manual provides general instructions. Many variables can change the circumstances of the instructions,

i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This

manual cannot begin to plot out instructions for every possibility, but provides the general instructions,

as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the

provided instructions may result in death, serious personal injury, severe product and/or property damage,

including voiding of the Lippert limited warranty.

The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury

and/or product or property damage if not safely adhered to and within the parameters set forth

in this manual.

Moving parts can pinch, crush or cut. Keep clear and use caution.

Rev: 05.11.23 Page 3 CCD-0007719

Operation

Fig. 1

Latch

Retract the table so the tabletop can function as a base in converting the area to a bed.

NOTE: The tabletop must be supported underneath in order to place a mattress on it to create a bed. The

weight rating is dependent on the support structures used by the OEM.

1. Locate the latch on the side of the assembly (Fig. 1).

2. Release the latch with one hand and use the other hand to guide the tabletop while lowering it (Fig. 2)

into the stowed position (Fig. 3).

Fig. 2 Fig. 3

3. The retracted table can now function as a bed base (Fig. 3).

4. To move back to the table position, lift up on tabletop. The latch is spring loaded so it will snap into

place to hold the tabletop when the top is returned to the up position.

Moving parts can pinch, crush or cut. Keep clear and use caution.

The contents of this manual are proprietary and copyright protected by Lippert. Lippert prohibits the copying or

dissemination of portions of this manual unless prior written consent from an authorized Lippert representative

has been provided. Any unauthorized use shall void any applicable warranty. The information contained in this

manual is subject to change without notice and at the sole discretion of Lippert. Revised editions are available

for free download from lippert.com.

Please recycle all obsolete materials.

For all concerns or questions, please contact Lippert

Ph: 432-LIPPERT (432-547-7378) | Web: lippert.com | Email: [email protected]

Inhaltsverzeichnis

Andere Lippert Inneneinrichtung Handbücher

Lippert

Lippert Compact Flyscreen Bedienungsanleitung

Lippert

Lippert Cosmo 2 Euro Bedienungsanleitung

Lippert

Lippert Tri-Fold Sofa Betriebsanleitung

Lippert

Lippert Tokyo Bed Bedienungsanleitung

Lippert

Lippert Bed/Table Pedestal V2 Bedienungsanleitung

Lippert

Lippert Schwintek Bedienungsanleitung

Lippert

Lippert Thomas Payne series Bedienungsanleitung

Lippert

Lippert Moon Bedienungsanleitung

Lippert

Lippert Thomas Payne Seismic Theater Seating Montageanleitung

Lippert

Lippert Thomas Payne Tri-Fold Sofa Montageanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung