Participant – Press and hold
Talk Button to speak; release
to mute. Soft Buttons have
no function. Note: LKR-11 has no
Talkback functionality.
Programming and
ListenTALK Software Suite
The ListenTALK Software
Suite, available at www.
listentech.com/support/
software/, features complete
setup, inventory management,
group creation and naming.
Many options are accessible
from the Transceiver/Receiver
internal menu. Please refer
to the ListenTALK Operations
Manual.
Hearing Safety
This product amplies audio to
a high level which could cause
hearing damage. To protect
your hearing, turn down the
volume before putting on the
Ear Speaker or Headset, then
adjust to your preference.
Medical Device Safety
Before using this product
with an implantable or other
medical device consult with
your physician or the device
manufacturer. Always conrm
you are using this product
in accordance with safety
guidelines established by your
physician or the manufacturer.
© 2018 Listen Technologies Corporation®
All Rights Reserved 2018
Visit Listen at www.listentech.com
or telephone +1.801.233.8992 or
1.800.330.0891
20180427
Recycling
Please help us protect the
environment by properly
disposing of batteries. Take
batteries or equipment to any
electronic recycling collection
point or return them to the
factory.
Connect Headsets
Connect Listen Technologies
headsets or use standard
smart-phone earphones.
BASIC OPERATION
Press Volume Up or Volume
Down button to control
volume.
Leader (LK-1 only) – Press
Talk Button to toggle between
Talk and Mute. Press and
momentarily hold Left Soft
Button to select Talkback
modes (O, Leader or Group).
Right Soft Button initiates
pairing.
Create a Group
Create a Leader and Sub-
Leaders (optional) by inserting
red Leader Clips on LK-1. To
create a Group, Pair Leader
with Participants and
Sub-Leaders in the Docking
Station or using Near-Field
Communications as follows:
Press and momentarily hold
Leader’s Right Soft Button.
Then, touch Leader’s back to
each Participant’s and
Sub-Leader’s back. A beep
Indicates successful pairing.
Create multiple, independent
ListenTalk Groups by
repeating this process,
with additional units.
