Instruction manual
7
3. Place the plastic film on the hot wire.
Note: caution! Hot surface, do not touch the hot wire.
ake sure you give the appliance time to cool down. Wait at least 15 seconds between seals
4. Put down the cover, firmly press with both hands hold on both ends of the cover to lock it.
5. Press the red button seal, the red light light up, the bag is automatically sealed.
6. After the red light is off, press unlock button on both sides and remove the plastic bag.
At this moment you can begin the vacuum putting of food:
Note: if you use plastic bag, you do not have to respect the stages above
1. Put plastic bag with the food in the sealing groove (food shall not be more than three-quarters of
the plastic bag).
2. Put down the cover and lock it (as above description).
Note:
•It is recommended to use the continuous device during no more than 25 seconds.
•For the high temperature food packaging, to prevent burns, please cool down after the
packaging.
•The part where you want to seal the bag owes remained clean and exempt from food.
Also watch not to wrinkle the bag
•If you want to put the vacuum-packed food in a microwave, must first punch a hole in the
plastic bag.
•After-party vacuum packaging of food, placed in the refrigerated immediately or froze it.
•Liquid food, it must not be vacuum packed with plastic bag, only need to be sealed.
3. Press the green button (automatic ventilation and sealing function).
4. The vacuum pump is running, the air inside the bag will be discharged to the outside.
Note: if you want to stop running, please press stop button.
5. After reached the right pressure, the green light turned red, sealing function will start
automatically.
6. When the red light is off, operation stops.
7. Press the sides button, open the cover and remove the vacuum-packed bags.
