Logenex SCDM-HD1 Handbuch

INSTALLATION & CONFIGURATION MANUAL

SCDM-HD1, SCDM-HD2

Single and Dual Input QAM Encoders / Modulators

Logenex Innovations Inc.

6A-7500 Martin Grove Rd.

Woodbridge, Ontario L4L8S9

Tel: (905) 790-8823 Fax: (289) 371-3117

www.logenex.com

SCDM-HD Series Manual V1.1

TABLE OF CONTENTS

SAFETY PRECAUTIONS.................................................................................................3

PACKAGE CONTENTS...................................................................................................3

SPECIFICATIONS................................................................................................... …….4

INSTALLATION ............................................................................................................5

UNPACKING and INSPECTION............................................................................................................................5

HARDWARE INSTALLATION and CONNECTIONS......................................................................................5

MODULATOR SETUP AND CONFIGURATION ................................................................6

MODULATOR CONFIGURATION.........................................................................................................................6

CABLE PROVIDER SETUP……………………………………………………………………………………………9

SCDM-HD MODULATOR NOTES.................................................................................10

SCDM-HD Series Manual V1.1

SAFETY PRECAUTIONS

The presence of this symbol is to alert the installer and user to the presence of

uninsulated dangerous voltages within the product’s enclosure that may be of sufficient

magnitude to produce a risk of electric shock.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS DEVICE

TO RAIN OR MOISTURE. DO NOT OPEN THE UNIT. REFER SERVICING TO QUALIFIED

PERSONNEL ONLY.

DO NOT apply power to the unit until all connections have been made, all components have been installed

and all wiring has been properly terminated.

DO NOT terminate, change or uninstall any wiring without first disconnecting the unit’s power adapter from

the device.

This device is supplied with the appropriately rated 12VDC power supply with the center pin positive. The

use of any other power supply could cause damage and invalidate the manufacturer’s warranty.

DO NOT connect the power cord to the device if the power cord is damaged.

DO NOT cut the power cord.

DO NOT plug the power cord into an AC outlet until all cables and connections to the device have been

properly connected.

The device should be installed in an environment consistent with its operating temperature specifications.

Placement next to heating devices and ducts is to be avoided as doing so may cause damage. The device

should not be placed in areas of high humidity.

DO NOT cover any of the device’s ventilation openings.

DO NOT cover or obstruct the device’s fan or fan openings.

If the device has been in a cold environment allow it to warm to room temperature for at least 2 hours

before connecting to an AC outlet.

PACKAGE CONTENTS

This package contains:

One SCDM-HD1 OR SCDM-HD2 QAM Encoder / Modulator

One power cable

One installation / configuration manual

Inspect the package before starting installation to ensure there is no damage and all supplied contents are

present. Contact your distributor or dealer should the device be damaged or package contents are incomplete.

SCDM-HD Series Manual V1.1

SPECIFICATIONS

INPUT

SCDM-HD1

SCDM-HD2

Input Connectors

HDMI input (Video+Audio)

HDMI input (Video+Audio) x2

Y, Pr, Pb Component input (Video)

Y, Pr, Pb Component input (Video) x2

Composite input (Video)

Composite input (Video) x2

L / R Channel Audio input (Audio)

L / R Channel Audio input (Audio) x2

Coaxial SPDIF input (Digital Audio, LPCM) ),

AC3 Pass Through

Coaxial SPDIF input x2 (Digital Audio, LPCM),

AC3 Pass Through)

Optical SPDIF input (Digital Audio, LPCM), AC3

Pass Through

Optical SPDIF input x2 (Digital Audio, LPCM),

AC3 Pass Through

ASI Optional** (check factory for details)

ASI Optional **(check factory for details) x2

Video Input Level

0.7 –1.4V(peak-to peak)

Video Mode

480i,480p,576i,576p,720P50,720P60,

1080i50,1080i60

1080P50,1080P60-

(Optional for AVC Encoding Only)

480i,480p,576i,576p,720P50,720P60,

1080i50,1080i60

1080P50,1080P60(Optional for AVC Encoding

Only)

Audio input

Stereo / Digital

Audio Input Level

0.4 –0.8V (p-to-p)

Input Impedance

75Ω

OUTPUT

Frequency Range

54-864MHz (2-135)

Output Level

40 dBmV

Output Impedance

75 ohm

Channel Bandwidth

6 MHz

Channel Level

Adjustment

20 dB typ.

MER

38 dB min.

MODULATION

Video Resolution

1080i /720p/576i/576p/480p/480i

1080p @MPEG-AVC

1080i /720p/576i/576p/480p/480i

1080p @MPEG-AVC

Video Compression

AVC MP@Level4 / MPEG2 MP@HL

Audio Compression

MPEG1 Layer II/

AAC (Advanced Audio Codec)

AC-3 Pass through

MPEG1 Layer II/

AAC (Advanced Audio Codec)

AC-3 Pass through

Constellations

64 QAM / 256 QAM

Control/Monitoring

Front Panel LCD

Control

Yes

Remote Setup

Functions

Yes

Remote Monitoring /

Status

Yes

GENERAL

Power Supply

12 VDC 3 Amp

Consumption

1300 mA

1700 mA

Languages

English

Dimensions

482.7mm x 240mm x 44.4mm

(19" x 9.45" x 1.75") 1RU

482.7mm x 240mm x 44.4mm

(19" x 9.45" x 1.75") 1RU

*Specifications subject to change without prior notice

SCDM-HD Series Manual V1.1

HARDWARE INSTALLANTION and CONNECTIONS

It is highly recommended that quality cables and connectors be used for all video and audio source

connections.

1. The unit is designed to be rack mounted in a standard EIA 19” rack. Use the supplied rack screws to

mount the unit securely.

2. The unit comes standard with HDMI, Component, and Composite video inputs.

The CHD encoder / modulator are intelligently designed to detect the active video input from the video

source. HDMI Connection: Connect the HDMI cable(s) from the video source(s) into the HDMI

input(s). If using a Component Video Cable, connect the Y (Green), Pb (Blue), and Pr (Red) video

source cable to the unit’s Component input ports. If using a Composite Video source, use a 75Ω

coaxial cable with RCA connectors to connect the video source (e.g., CATV, DVD, VCR, Camera) to

the unit’s CVBS port (IN1…IN2 depending on the CHD model).

Repeat this step for each video source connection.

3. Component / Composite Audio inputs: Connect a Digital Audio Coaxial cable or Optical (Toslink)

cable for Digital Audio use from the audio source. For A/V audio input (Left / Right Audio) use RCA

cables to connect the audio source to the red / white AUDIO L and AUDIO R INPUT jacks (IN1…IN2

depending on the CHD model).

Repeat this step for each audio source connection.

Be sure the video and audio connections for each source are consistent with the unit’s inputs (IN1…IN2

depending on the SCDM model).

4. Use a quality 75Ω coaxial cable with “F” connectors from the unit’s RF OUT jack to the distribution

system (combiner or reverse splitter) or directly to a television.

5. Connect the included power cord to the unit’s POWER plug.

6. Connect the power cord to an appropriately rated AC power outlet.

SCDM-HD Series Manual V1.1

MODULATOR SETUP AND CONFIGURATION

INITIAL SETUP

The SCDM’s front panel can be used to configure the modulator as desired. Below find the advanced menu

setup instructions.

MODULATOR CONFIGURATION

Once the modulator is powered up it will go through an internal booting process. When “Running” appears in

the LCD Display the unit is ready for programming or operation. (The unit will display Bit rate information

shortly after “Running” appears in the LCD display).

Password –Press the OK button to select a 4-digit password. Use the Scroll Up/Down button to

search and select individual numbers for the password. The default password is 0000. Press the

OK button for each number to set the password.

***NOTICE TO THE INSTALLER- SEVERAL INTERNAL FUNCTIONS ARE RESERVED OR SET

ASIDE FOR FUTURE USE. SKIP OVER THESE ‘RESERVE’ MENUS WHEN SETTING UP THE

ENCODER FOR YOUR APPLICATION

Advanced Menu –To access the Advanced Menu first enter the password by pressing the OK button.

Once the correct password is entered press the OK button and the LCD Screen will display “Advanced

Menu Output Channel”. The following configuration options are available under Advanced Menu:

Output Channel –Use the Scroll Up/Down button to change the output channel. Channels 2 to

135 are available. Once the desired output channel is selected press the OK button to set the

channel.

Major and Minor Channel Numbers:

Major Channel # The Major Channel # is automatically set when the user selects the output

channel. Example: If you select output channel (STD) 102, then the Major Channel Number will

be 102.1.

Minor Channel # (Dual Model) - Not Selectable. The Minor Channel # is automatically set

when the user selects the output channel. Example: If you select output channel (STD) 102,

then the Major Channel Number will be 102.1 and the Minor Channel # will be set as 102.2.

Attenuation –Use the Scroll Up/Down button to select Attenuation. Press the OK button to

enter the Attenuation menu. Use the Scroll/Up down button to select the desired attenuation in

1dB increments from 0 to minus 20 dB. Once the desired attenuation level is found press the

OK button to set.

Constellation –Use the Scroll Up/Down button to select Constellation. Press the OK button to

enter the Constellation menu. The modulator allows for either QAM256 or QAM64. Select the

desired Constellation then press the OK button to set. Factor Default is QAM256.

Interleaver- If needed, use the Scroll Up/Down button to select the appropriate Interleaver

selection. Press the OK button to enter the Interleaver menu. Use the Scroll Up/Down button to

select the desired Interleaver value and press the OK button to set. Factory default is I=128,

J=8.

Channel Type –Use the Scroll Up/Down button to select Channel Type. Press the OK button to

enter the Channel Type menu. Menu options are STD, HRC and IRC. The factory default is

STD. Use the Scroll Up/Down button to select the desired Channel Type and press the OK

button to set.

SCDM-HD Series Manual V1.1

RF Output –Use the Scroll Up/Down button to select RF Output. Press the OK button to enter

the RF Output menu. Menu options are Normal, Inverted and C.W. The factory default is

Normal. Use the Scroll Up/Down button to select the desired RF Output and press the OK

button to set.

Brightness –Use the Scroll Up/Down button to select Brightness. Press the OK button to enter

the Brightness menu. Use the Scroll Up/Down button to select the desired Brightness value (0

to 255) and press the OK button to set. Factory default is 128

Contrast –Use the Scroll Up/Down button to select Contrast. Press the OK button to enter the

Contrast menu. Use the Scroll Up/Down button to select the desired Contrast value (0 to 255)

and press the OK button to set. Factory default is 128.

Saturation –Use the Scroll Up/Down button to select Saturation. Press the OK button to enter

the Saturation menu. Use the Scroll Up/Down button to select the desired Saturation value (0 to

255) and press the OK button to set. Factory default is 128.

Hue –Use the Scroll Up/Down button to select Hue. Press the OK button to enter the Hue

menu. Use the Scroll Up/Down button to select the desired Hue value (0 to 255) and press the

OK button to set. Factory default is 128.

Device Address –Use the Scroll Up/Down button to select Device Address. Press the OK

button to enter the Device Address menu. Use the Scroll Up/Down to select the Desired

Address ranging from 1 to 32 then press OK to set.

Set TS ID. Use the Scroll Up/Down button to set TS ID. Press the OK button to enter the TS

menu. Use the Scroll Up/Down to select the TS ID ranging from 1 to 65535 then press OK to

set.

Set Region Name. If required, use Scroll Up/Down button to set Region Name. Press the OK

button to enter the Region Name. Use the Scroll Up/Down button to select the first character of

the desired Region Name then press the OK button to set. Repeat the process until the desired

Region Name is completed. Factory Default is USA.

Note: Do not Change for USA operation.

Default Configuration –

Caution: Once the OK button is pressed at the Default Config menu the unit will

automatically reset to the factory default.

All settings or changes to the encoder/modulator will be lost.

If you wish to set the modulator back to the factory default settings use the Scroll Up/Down

button to reach Default Configuration then press the OK button.

1 Video Input –Use the Scroll Up/Down button to select 1 Video Input. Press the OK button to

enter the 1 Video Input menu. Use the Scroll Up/Down button to select the Video Input option:

Auto, Composite, Component, HDMI, or ASI*. The factory default is Auto. Press the OK button

to set.

The SCDM-HD series of Encoder/Modulators is designed with Intelligent Input Detection (IID)

technology. If you select Auto, the unit will detect the Active input source. You can set or fix the

input source on any of the input types available on your unit.

If the modulator has more than one video input scroll through the Advanced Menu for the

additional video input menus. (2 Video Input for Dual Unit).

SCDM-HD Series Manual V1.1

*An ASI connection may not be present on your model. Set ASI if you desire to fix the input on ASI.

1 Program Num. Use the Scroll Up/Down button to set 1 Program Num(Number). Press the OK

button to enter the 1 Program Num menu. Use the Scroll Up/Down to select the 1 Program Num

ranging from 1 to 65535 then press OK to set.

If the modulator has more than one video input scroll through the Advanced Menu for the

additional Program Num menus. (2 Program Num for Dual Unit).

1 Short Channel Name –Use the Scroll Up/Down button to select Short Channel Name. Press

the OK button to enter the Short Channel Name menu. Use the Scroll Up/Down menu to select

the first character of the desired Short Channel Name then press the OK button to set. Repeat

the process until the Short Channel Name is completed. If the modulator has more than one

video input scroll through the Advanced Menu for additional Short channel name menus.

The Short Name can be 7 characters long. Factory Default is MY-DVT1.

1 Long Ch Name –Use the Scroll Up/Down button to select Long Channel Name. Press the

OK button to enter the Long Channel Name menu. Use the Scroll Up/Down menu to select the

first character of the desired Long Channel Name then press the OK button to set. Repeat the

process until the Long Channel Name is completed. If the modulator has more than one video

input scroll through the Advanced Menu for additional Long channel name menus.

The Long Name can be 16 characters long. Factory Default is ATSC-Digital-TV1

1 Source ID. Use the Scroll Up/Down button to set 1 Source ID. Press the OK button to enter

the 1 Source ID menu. Use the Scroll Up/Down to select the 1 1 Source ID. ranging from 1 to

65535 then press OK to set.

If the modulator has more than one video input scroll through the Advanced Menu for the

additional Source ID menus. (2 Source ID for Dual Unit).

1 Aspect Ratio –Use the Scroll Up/Down button to select 1 Aspect Ratio. Press the OK button

to enter the 1 Aspect Ratio menu. Use the Scroll Up/Down button to select the desired Aspect

Ratio option of 4:3 or 16:9 then press the OK button to set. Factory default is 4:3. If the

modulator has more than one video input scroll through the Advanced Menu for additional

Aspect Ratio menus.

1 Video Output –The SCDM-HD Series of Encoder / Modulators is Dual MODE Capable. The

user may select to output video in either MPEG2 or AVC (MPEG4). Use the Scroll Up/Down

button to select 1 Video Output. Press the OK button to enter the 1 Video Output menu. Use the

Scroll Up/Down button to select the 1 Video Output option: MPEG2 or AVC. The factory default

is MPEG2. Press the OK button to set. If the modulator has more than one Video Output scroll

through the Advanced Menu for the additional Video Output menus.

Note: The Dual Input Unit allows the installer to select a combination of Video Output formats.

The SCDM-HD2 can either have both outputs broadcasting in either MPEG2 or AVC(MPEG4)

or a combination of MPEG2 and AVC(MPEG4).

1 Audio Input –Use the Scroll Up/Down button to select. Press the OK button to enter the 1

Audio Input menu. Use the Scroll Up/Down button to select the 1 Audio Input option: Analog

(L/R), Coaxial, or Optical. The factory default is Analog. Select the appropriate Input selection

for your installation. Press the OK button to set. If the modulator has more than one Audio

Input scroll through the Advanced Menu for the additional Audio Input menus.

1 Audio Output –Use the Scroll Up/Down button to select 1 Audio Output. Press the OK button

to enter the Audio Output menu. Use the Scroll Up/Down button to select the Audio Output

SCDM-HD Series Manual V1.1

option: AC3 (AC-3 Pass Through), MP2 (MPEG2 Layer I Audio), or AAC. The factory default is

MP2. Press the OK button to set. If the modulator has more than one Audio output scroll

through the Advanced Menu for the additional Audio Output menus.

1 Closed Caption- Use the Scroll Up/Down button to 1 Closed Caption. Press the OK button to

enter the 1 Closed Caption menu. Enable / Disable 1 Closed Caption control. If the modulator

has more than one Video Output scroll through the Advanced Menu for the additional Closed

Caption menus.

To exit the Advanced Menu use the Scroll Up/Down button to select Exit then press the OK button.

Exit Exit Menu will appear on the LCD screen. Press the OK button twice to exit.

*** Important- Save the settings ***

Once the settings are made and the modulator is programmed (a) remove power from the unit by

disconnecting the power supply cable from the rear of the unit, (b) wait 5 seconds and (c) reconnect the

power cable. This will allow the modulator to capture the new settings.

CABLE PROVIDER SETUP

Rogers: 988-991

Allows 4 channels to be modulated. Each input must be set to a program number ranging from 1-4 and

will show on the below channels.

Output Channel: 99 MHz | Channel 96

Program Number: 1

Program 1: 988

Program 2: 989

Program 3: 990

Program 4: 991

Cogeco: 398

Output Channel: 759 MHz | Channel 118

Program Number: 398

Shaw: 716

Output Channel: 855 MHz | Channel 134 Constellation: QAM64

Program Number: 1

SCDM-HD Series Manual V1.1

SCDM-HD MODULATOR NOTES

PRODUCT NOTES:

ITEM

VALUE

PASSWORD

SERIAL NUMBER

INSTALLATION DATE

PURCHASE DATE

VIDEO 1 INPUT

VIDEO 2 INPUT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Logenex Modulator Handbücher

Logenex

Logenex SCDM-SD1 Handbuch

Beliebte Modulator Handbücher anderer Marken

axing

axing AVM 5-00 Bedienungsanleitung

IKUSI

IKUSI MAC-HOME HD Bedienungsanleitung

Wisi

Wisi MINI OM 10 Bedienungsanleitung

RCA

RCA CRF910 Bedienungsanleitung

Pico Macom

Pico Macom PM45 Bedienungsanleitung

FTE Maximal

FTE Maximal MODIG AIR Bedienungsanleitung

Thor Broadcast

Thor Broadcast H-IP-32RF Bedienungsanleitung

Delphi

Delphi SA10003 Bedienungsanleitung

Elan

Elan MOD3000 Bedienungsanleitung

ClearView

ClearView SD4260 Bedienungsanleitung

Televes

Televes T.0X COFDM-QAM CI Bedienungsanleitung

Crucial Audio

Crucial Audio Die Gotterdämmerung Bedienungsanleitung

Pioneer

Pioneer CD-V61FM Bedienungsanleitung

Televes

Televes 554912 Bedienungsanleitung

Newtec

Newtec M6100 Bedienungsanleitung

ProTelevision

ProTelevision PT 5780 Bedienungsanleitung

Argent Cables

Argent Cables HD DVB-T MODULATOR Bedienungsanleitung

SSS Siedle

SSS Siedle BVM 650-0 Bedienungsanleitung