LogTag UTRED30-WiFi Bedienungsanleitung
Version B - June 2019
www.logtagrecorders.com
Quick Start Guide
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
What's Included 3
Battery Installation 4
Downloading LogTag Analyzer 5
Configuring your UTRED30-WiFi 6
Downloading the Connection Wizard 7
Running the Connection Wizard 8
Connecting to your WiFi Network 9
LogTag Online 12
Creating a Location 13
Installing the Wall Mount 14
Starting your UTRED30-WiFi 15
Quickstart Guide Contents
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
Page 3
What's Included
Please check you have each of the items shown below before
continuing with setting up your UTRED30-WiFi.
UTRED30-WiFi
USB Cable
Wall mount
(Not included)
External Probe
(Not included)
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
Page 4
Battery Installation
1. You will need a small phillips (cross-shaped) screwdriver to
remove the cover on the back of the UTRED30-WiFi case.
2. Once you have removed the battery cover, install the 2 AAA
batteries provided in the product. Take note of the direction
each battery must be installed.
3. Once both batteries are securely installed, replace the battery
cover and secure via the screw provided.
AAA batteries is another power backup source to ensure your
device continues to record in the event of a power outage or is
unplugged.
The 5V/5W USB is the main power supply to power the
UTRED30-WiFi unit permanently via the USB socket.
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
Page 5
Downloading LogTag Analyzer
To download the latest LogTag Analyzer, open your browser and
navigate to:
https://logtagrecorders.com/software/LTA3/
1. Fill in the form with your details, then click ‘Go to downloads
page’
2. Click ‘Download Now’ to start the download
3. Click ‘Run’ or ‘Save File’ then double-click on the downloaded file
to open the LogTag Analyzer Setup Wizard
4. Follow the on-screen prompts to install LogTag Analyzer
5. Click ‘Finish’ to exit the Setup Wizard
Warning: Please ensure no other LogTag software is currently
running on your computer before running the Analyzer software.
If your logger is not pre-configured, please follow the Downloading
LogTag Analyzer and Configuring your UTRED30-WiFi processes.
Note: If you already have the LogTag Analyzer installed, please see
whether you need to update to the latest version by clicking ‘Check
Internet for updates’ from the ‘Help’ menu.
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
Page 6
Configuring your UTRED30-WiFi
Connect your UTRED30-WiFi to your
computer via the USB cable provided.
The USB socket on the device is
located on the bottom, protected by a
rubber seal.
1. Open LogTag Analyzer
2. Click ‘Configure’ from the ‘LogTag’ menu or click the ‘Wizard’
icon
3. Adjust your logger configuration settings as required.
For more information on configuration settings, please refer to
Configuring the UTRED30-WiFi in the Product User Guide or press
‘F1’ for help
4. Click Configure’ to upload the configuration settings to the logger
5. Click ‘Close’ to exit the configuration page
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
Page 7
Downloading the Connection Wizard
The unit requires you to connect it to your WiFi Network. To do
that, we have an easy tool for you to use called the LogTag Online
Connection Wizard.
To download the LogTag Online Connection Wizard, please open
your browser and type the link below to begin the download:
https://logtagrecorders.com/download/connectionwizard.exe
If you cannot access the link above, you can download the .zip
version instead and ensure you unzip the file before running it via
the link below:
https://logtagrecorders.com/download/connectionwizard.zip
Connect your UTRED30-WiFi to
your computer via the USB cable
provided. The USB socket on the
device is located on the bottom,
protected by a rubber seal.
Warning: Please ensure no other LogTag software is currently
running on your computer before running the Wizard software.
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
Page 8
Running the Connection Wizard
This software doesn’t require any setup or installation. Simply
double-click the connectionwizard.exe file that you downloaded.
The first page of the Wizard will be displayed.
When you’re ready to begin, click “Start”.
Easy Setup will be
selected by default.
Keep this option
checked and click
“Next”.
You will be asked to sign in to your LogTag Online account. If you
do not have an account, click the link below or alternatively, open
your browser, type the following link into the address bar and follow
the on-screen instructions.
https://logtagonline.com/signup
or click Create a LogTag Online Account link.
You have now created your account and is now ready to set up
connection of your UTRED30-WiFi to the WiFi network.
You have now created your account and is now ready to set up
connection of
y
our UTRED30-WiFi to the WiFi network.
Please ensure there is internet connection on your computer prior
to starting this process.
Please ensure there is internet connection on
y
our com
p
uter
p
rior
to startin
g
this process.
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
Page 9
Connecting to your WiFi Network
Type your LogTag Online account details and click “Sign In”,
followed by “Next”.
The Wizard will now scan
for any connected LogTag
devices.
If the scan doesn't find any
devices, double-check the
device is plugged in to your
computer with the USB cable
provided and click “Scan
Again”.
As soon as a device has been
identified, it will appear in the
table (left) and automatically
register that device to your
LogTag Online account.
The Status will turn green with
the text “Registered” once
complete.
Click the “Next” button once you are ready.
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
Page 10
1
23
4
1. Click the dropdown arrow and your WiFi device will begin
searching for nearby Wireless Networks.
Note: This process can take up to 2 minutes, please wait whilst
the network scan is in progress.
2. Once you have selected your WiFi Network from the list, type
the password for the network. Remember that passwords are
case-sensitive.
3. (Optional) Once you have typed your password, you can
click the eye icon to reveal the password. Incorrectly typed
passwords is one of the most frequent reasons why device
setup fails.
4. Once you have selected your WiFi Network and typed the
password, click “Next”.
Note: Some WiFi Networks won't appear in this list for security
purposes. If you are aware that your network is one of these, you
can manually type the name of your network (SSID) in the
Network Name field instead of clicking the drop-down.
Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524
Andere Handbücher für UTRED30-WiFi
5
Inhaltsverzeichnis
Andere LogTag Datenlogger Handbücher
LogTag
LogTag TRED30-16R Bedienungsanleitung
LogTag
LogTag UHADO-16 Bedienungsanleitung
LogTag
LogTag TRIX-8 Bedienungsanleitung
LogTag
LogTag UTRED30-16 Bedienungsanleitung
LogTag
LogTag TRID30-7 Bedienungsanleitung
LogTag
LogTag USRIC-8 Technisches Datenblatt
LogTag
LogTag UTREL-16F Bedienungsanleitung
LogTag
LogTag USRIC-8 Bedienungsanleitung
LogTag
LogTag UTRED30-WiFi Bedienungsanleitung
LogTag
LogTag VFC400-WiFi Bedienungsanleitung
LogTag
LogTag Utrel 30-16 Bedienungsanleitung
LogTag
LogTag USRID-16 Bedienungsanleitung
LogTag
LogTag USRIC-8 Bedienungsanleitung
LogTag
LogTag TRED30-16R Bedienungsanleitung
LogTag
LogTag UTRED30-WiFi Gebrauchsanweisung
LogTag
LogTag UTREL30-WIFI Technisches Datenblatt
LogTag
LogTag UTREL30-16 Technisches Datenblatt
LogTag
LogTag UTRED30-16 Bedienungsanleitung
LogTag
LogTag UTREL30-WIFI Technisches Datenblatt
LogTag
LogTag Utrel-16 Bedienungsanleitung
