LogTag UTREL30-WIFI Bedienungsanleitung
Version A
www.logtagrecorders.com
Quick Start Guide
What’s Included 3
Battery Installation 4
Downloading LogTag Analyzer 5
Running the Connection Wizard 7
Connecting to your WiFi Network 10
Configuring your UTREL30-WiFi 13
Installing the Wall Mount 14
Starting your UTREL30-WiFi 15
LogTag Online 16
Quickstart Guide Contents
Page 3
What’s Included
Please check you have the items shown below before
continuing with setting up your UTREL30-WiFi.
UTREL30-WiFi
Glycol Buffer
(Not included)
ST10 External
Probe
(Not included)
USB Cable
2x AAA Battery
(Not included)
Wall mount
(Not included)
Page 4
Battery Installation
1. You will need a small Phillips (cross-shaped)
screwdriver to remove the cover on the back of the
UTREL30-WiFi case.
2. Once you have removed the battery cover, install
the two AAA batteries. Take note of the direction
each battery must be installed.
3. Once both batteries are securely installed, replace
the battery cover and secure via the screw provided.
AAA batteries are another backup power source to
ensure your device continues to record in the event
of a power outage or is unplugged.
The USB cable is the main power method to power
the UTREL30-WiFi unit permanently via the USB
socket.
Page 5
Downloading LogTag
Analyzer
Warning: Please ensure no other LogTag software is
currently running on your computer before running the
Analyzer software.
To download the latest LogTag Analyzer, open your
browser and navigate to:
https://logtagrecorders.com/software/LTA3/
1. Click ‘Go to downloads page’ to take you to the
download page.
2. Click ‘Download Now’ to start the download.
3. Click ‘Run’ or ‘Save File’ then double-click the
downloaded file to open the LogTag Analyzer Setup
Wizard.
Page 6
Downloading LogTag
Analyzer continued...
Note: If you already have LogTag Analyzer installed,
please see whether you need to update to the latest
version by clicking ‘Check Internet for updates’ from
the ‘Help’ menu.
4. Follow the on-screen prompts to install LogTag
Analyzer.
5. Click ‘Finish’ to exit the LogTag Analyzer Setup
Wizard.
Page 7
Running the Connection
Wizard
The first page of the Wizard will be displayed.
When you’re ready to begin, click “Start”.
Open LogTag Analyzer and select ‘Connection Wizard
from the ‘LogTag Online’ menu.
Please ensure there is internet connection on your
computer prior to starting this process.
Pl
ease ensure t
h
ere
i
s
i
nternet connect
i
on on
y
our
computer pr
i
or to start
i
n
g
t
hi
s process
.
You will be asked to sign in to your LogTag Online
account. If you do not have an account, click the link
Page 8
Running the Connection
Wizard continued...
below or alternatively, open your browser, type the
following link into the address bar and follow the
on-screen instructions.
https://logtagonline.com/signup
or click Create a LogTag Online Account link.
Note: If you ‘Skip’ this step, you will need to manually
register the device on LogTag Online or repeat the
LogTag Online Connection Wizard.
Click ‘Sign In’ after you have entered your login details
to continue setting up WiFi on your UTREL30-WiFi.
Page 9
The Wizard will now
scan for any connected
LogTag devices.
If the scan doesn't find
any devices, double-
check the device is
plugged in to your
computer with the USB
cable provided and click
“Scan Again”.
As soon as a device
has been identified, it
will appear in the table
(left) and automatically
register that device to
your LogTag Online
account.
Running the Connection
Wizard continued...
You have now created your account and is now
ready to set up connection of your UTREL30-WiFi to
the WiFi network.
Y
ou
h
ave now create
d
y
our account an
d
i
s now
read
y
to set u
p
connection o
f
y
our UTREL30-WiFi to
the
WiFi
n
et
w
o
r
k.
Page 10
The Status will turn green
with the text “Registered”
once complete.
1. Network settings are automatically populated
from PC settings by default, if it can be discovered.
Alternatively, click the Network Name arrow to see
Connecting to your
WiFi Network
If one or more device(s) are identified and registered,
the screen automatically switches to the next screen
If one or more device
(
s
)
are identified and re
g
istered,
t
h
e screen automat
i
ca
lly
sw
i
tc
h
es to t
h
e next scree
n
Andere Handbücher für UTREL30-WIFI
3
Inhaltsverzeichnis
Andere LogTag Datenlogger Handbücher
LogTag
LogTag UTRIX-16 Technisches Datenblatt
LogTag
LogTag USRIC-8 Technisches Datenblatt
LogTag
LogTag UHADO-16 Bedienungsanleitung
LogTag
LogTag TRIX-8 Bedienungsanleitung
LogTag
LogTag USRIC-8 Bedienungsanleitung
LogTag
LogTag USRIC-8 Bedienungsanleitung
LogTag
LogTag TREL30-16 Bedienungsanleitung
LogTag
LogTag UTRED30-WiFi Technisches Datenblatt
LogTag
LogTag TRID30-7 Bedienungsanleitung
LogTag
LogTag TRED30-7 Montageanleitung
LogTag
LogTag UTREL30-WIFI Technisches Datenblatt
LogTag
LogTag VFC400-WiFi Bedienungsanleitung
LogTag
LogTag TRED30-16R Bedienungsanleitung
LogTag
LogTag UTREL30-16 Bedienungsanleitung
LogTag
LogTag UTRED30-WiFi Bedienungsanleitung
LogTag
LogTag USRIC Bedienungsanleitung
LogTag
LogTag TRED30-16R Bedienungsanleitung
LogTag
LogTag UTRED30-16 Bedienungsanleitung
LogTag
LogTag UTREL30-16 Technisches Datenblatt
LogTag
LogTag UTRED30-WiFi Bedienungsanleitung
