Loopcomm LP-8696R Bedienungsanleitung
Quick Installation Guide
Model : LP-8696R
300Mbps 11n Wireless AP Router
Step 1: Setting up a Home Network
Before setting up a home network, you have to power off Cable/ADSL modem.
1. Plug Power Adapter to PWR port and insert the other end to an available power outlet.
2. Connect desktop/laptop to LAN port of LP-8696R Wireless Router by Ethernet cable.
3. Connect Cable/ADSL modem to WAN port of LP-8696R Wireless Router by Ethernet cable.
Power on the Cable/ADSL modem.
Warning: Ensure Cable/ADSL modem has been turned off at least two minutes.
Step 2: Setup your wireless environment
1. Launch web browser: Enter http://192.168.1.254 in the URL. And press Login to main page.
(Note: Leave the Password Empty)
2. In Main page tab, click “setup” to start setup wizard
3. After click setup, you can have “Quick Setup” screen as below, and press “Next” to setup.
Quick Installation Guide
Model : LP-8696R
4. Select WAN connection type
5. Setup Wireless and Password
6. Click the “Finish”button to finish the Quick Setup.
Follow the Setup Wizard steps to finish management and configuration of LP-8696R Wireless Router.
Inhaltsverzeichnis
Andere Loopcomm Netzwerk-Router Handbücher
Loopcomm
Loopcomm LP-8616R Bedienungsanleitung
Loopcomm
Loopcomm LP-8186C Bedienungsanleitung
Loopcomm
Loopcomm LP-8186 Bedienungsanleitung
Loopcomm
Loopcomm LP-7316H Bedienungsanleitung
Loopcomm
Loopcomm LP-9696R Bedienungsanleitung
Loopcomm
Loopcomm LP-8616C Bedienungsanleitung
Loopcomm
Loopcomm LP-9696GR Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise