ENGLISH 5
4.1. STORING A POSITION
Using this function you are able to store a desk-height.
NOTE: On initial operation all stored positions are equal to the lowest possible desk-height
{lower end position). Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73 cm).
2. Press the S button. The display reads S -.
3. Press the position button of choice (e.g. S2). The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
4.2. RECALLING A SAVED POSITION
Using this function you are able to recall a stored position.
Alternative A (manually)
1. Press and hold the desired position button (e.g. 2).The desk moves until the
saved position is reached. lf you release the button before reaching the
saved position, the desk stops and the saved position will not be reached.
2. The desk has reached the saved height. Release the position button.
The display reads the actual desk-height.
.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
Page 9 / 12
4.4 Advanced Functions
4.4.1 Storing a position
Using this function you are able to store a desk-height.
Note: On initial operation all stored positions are equal to the lowest
possible desk-height (lower end position).
Note: Only one desk-height per button is allowed.
1. Move the desk to the position you want to store.
The display reads the actual height of the desk (e.g. 73cm).
2.
Press the Sbutton.
The display reads S –.
3.
Press the position button of choice (e.g. S2).
The display reads S 2.
4. Now the height is stored on the chosen position button.
The saving operation is confirmed with a double-click sound and after
approximately 2 seconds the stored height will be displayed.
