Lorell LLR44311 Bedienungsanleitung

Computer Desk

Bureau d’ordinateur

Escritorio de cómputo

LLR44311

LLR44311_F.indd 1LLR44311_F.indd 1 3/4/11 12:51 PM3/4/11 12:51 PM

Page 1 of 27

Instructions:

If you are missing parts or have other concerns, please email Lorell@sprich.com or fax: 404-472-9063.

Please provide the following information:

1. Full Name

2. Physical Address – do not include P.O. Box as our carriers cannot deliver to a P.O. Boxes

3. Phone Number

4. Model Number

5. Part Number

6. Invoice #

7. Date of Purchase

Note: Our policy is to send all parts requests normal ground transportation, if your requirements are to have these parts via

overnight/next day, please provide your designated carrier and account number. Replacement panels are not available. If damaged

has occurred during shipment, please return the entire unit to place of purchase for credit and replacement. Original Invoice may be

required.

Before you begin:

Open, identify and count all parts prior to assembly. Lay out the parts on a non-abrasive surface such

as carpet or blanket. You will need the tools identified below:

1. Phillips Head Screw Driver

2. Flat Head Screw Driver

3. Rubber Mallet (recommended)

4. Hammer

LLR44311_F.indd 1LLR44311_F.indd 1 3/4/11 12:51 PM3/4/11 12:51 PM

Page 2 of 27

HARDWARE IDENTIFICATION

LLR44311_F.indd 2LLR44311_F.indd 2 3/4/11 12:51 PM3/4/11 12:51 PM

Page 3 of 27

PANEL IDENTIFICATION

LLR44311_F.indd 3LLR44311_F.indd 3 3/4/11 12:51 PM3/4/11 12:51 PM

Page 4 of 27

ASSEMBLY INSTRUCTIONS

Step 1

With the Back Panel (D) laying on a

non-abrasive work surface insert 6 each

Cam Locks (2) in the holes shown. When

inserting the cam lock, ensure that the

arrow is facing toward the cam screw

entry.

Using a Phillips Head Screw Driver insert

3 each Cam Screw (1) in the holes shown.

With the Middle Side Panel (E) laying on

a non-abrasive work surface insert 5 each

Cam Lock (2) into the holes shown on the

drawing.

Using a Phillips Screw Driver, insert 2

each Cam Screw (1) in the holes shown.

Insert 2 each Wood Dowels in the holes

shown on the drawing. Tap securely into

position with a Rubber Mallet or Hammer.

Step 2

Using a Phillips Screw Driver install the

Left Side General Slide (20) to the Middle

Side Panel (E) and secure in place with 4

each 4X10 Screw (10).

Install the Full Extension Slide (16) on

the Middle Side Panel (E) in the position

shown on the drawing. Secure in place

with 3 each 4X10 Screw (10).

Install the Drawer Lock (7) in the position

shown on the drawing. Note the position

on the locking plate should be facing

toward the Full Extension Slide (16).

Secure in place with 4 each 3X18 Screw

(11) as shown.

Install the “O” ring as indicated on the

Drawer Lock (7).

LLR44311_F.indd 4LLR44311_F.indd 4 3/4/11 12:51 PM3/4/11 12:51 PM

Page 5 of 27

Step 3

Install the Middle Side Panel (E) onto the

Back Panel (D) as shown so that the Cam

Screws (1) engage with the Cam Locks

(2). With a Phillips Screw Driver rotate

the cam lock 1/2 turn clockwise until

snug. DO NOT OVER TIGHTEN.

Step 4

Insert 4 each Cam Lock (2) in the holes

shown on the Fixed Shelf Panel (F).

When inserting the cam lock make sure

that the arrow is facing toward the cam

screw entry.

On the Support Panel (G) insert 4 each

Wood Dowel (6) in the position shown.

Tap lightly into place using a Rubber

Mallet or Hammer.

Step 5

Install the Fixed Shelf Panel (F) onto

the Middle Side Panel (E) so that the

2 each Cam Screws (1) located on the

Middle Side Panel (E) engage with the

Cam Locks (2) located on the Fixed Shelf

Panel (F). Using a Phillips Screw Driver

rotate the cam locks 1/2 turn clockwise

until snug. DO NOT OVER TIGHTEN.

Install the Support Panel (G) so that the

Wood Dowels (6) fit in securely in holes

provided in the Middle Side Panel (E).

LLR44311_F.indd 5LLR44311_F.indd 5 3/4/11 12:51 PM3/4/11 12:51 PM

Page 6 of 27

Step 6

With the Right Side Panel (C) laying on

a non-abrasive surface insert the 5 each

Cam Screws (1) in the position shown on

the drawing.

Insert the 3 each Cam Lock (2) in the

position shown on the drawing. When

inserting the cam lock, make sure the

arrow is facing toward the cam screw

entry.

Insert the 2 each Wood Dowel (6) in

the position shown in the drawing. Tap

securely into place using a Rubber Mallet

or Hammer

Insert the 2 each Adjustable Foot (14) in

the position shown in the drawing.

Step 7

With the Left Side Panel (B) laying on

a non-abrasive surface insert the 3 each

Cam Screws (1) in the position shown on

the drawing.

Insert the 3 each Cam Lock (2) in the

position shown on the drawing. When

inserting the cam lock, make sure the

arrow is facing toward the cam screw

entry.

Insert the 2 each Wood Dowel (6) in

the position shown in the drawing. Tap

securely into place with a Rubber Mallet

or Hammer

Insert the 2 each Adjustable Foot (14) in

the position shown in the drawing.

Right Side Panel

LLR44311_F.indd 6LLR44311_F.indd 6 3/4/11 12:51 PM3/4/11 12:51 PM

Page 7 of 27

Step 8

On the Right Side Panel (C) install the

General Slide-Right (18) in the position

shown on the drawing. Using a Phillips

Screw Driver, secure into place with 4

each 4X10 Screw (10).

On the Right Side Panel (C) install the

Full Extension Slide (16) in the position

shown on the drawing. Secure in place

with 3 each 4X10 Screw (10).

Step 9

With the Back Panel (D) laying on a non-

abrasive surface, install the Right Side

Panel (C) so that the 3 each Cam Screws

on the Right Side Panel (C) engage with

the Cam Locks located on the Back Panel

(D). The Fixed Shelf Panel (F) should

be facing the bottom as the Adjustable

Foot (14) are on the Right Side Panel (C).

Additionally, the 2 Cam Locks located

on the Fixed Shelf Panel (F) will engage

with the Cam Screws located on the Right

Side Panel (C). Finally make sure that the

Wood Dowel (6) fit securely into holes

located on the Right Side Panel (C).

Attach the Left Side Panel (B) to the Back

Panel (D) so that the Cam Screws (1) on

the Left Side Panel (B) engage with Cam

Locks (2) located on the Back Panel (D).

Using a Phillips Screw Driver rotate the

cam locks 1/2 turn clockwise until snug.

BOTH LEFT AND RIGHT PANEL

LEGS SHOULD HAVE THE

ADJUSTABLE FOOT FACING THE

SAME WAY.

LLR44311_F.indd 7LLR44311_F.indd 7 3/4/11 12:51 PM3/4/11 12:51 PM

Page 8 of 27

Step 10

With the Top Panel (A) laying on a

non-abrasive surface, insert 8 each Cam

Screws (1).

With the desk frame standing in its

upright position, place the Top Panel (A)

on the unit so that the Cam Screws (1)

engage with the Cam Locks (2). Using

a Phillips Screw Driver, rotate the cam

locks 1/2 clockwise turn until snug. DO

NOT OVERTIGHTEN.

Step 11

Attach the Full Extension Slide (15) to the

2 each File Drawer Side Panel (I) with 6

each 4X10 Screw (10).

Install the Lock Plate (8) on the left side

File Drawer Side Panel (I) with 2 each

4X10 Screws (10).

Step 12

Install the File Drawer Front and Back

Panel (J) by sliding the Drawer Bottom

Panel (N) into the groove on the bottom.

Using a Phillips Screw Driver, attach the

left and right side File Drawer Side Panel

(I) with 12 each 4x40 Screw (5). Make

sure that you have properly placed the

Drawer Bottom Panel (N) in the groove

provided.

Attach the File Drawer Face Panel (H) to

the front of the unit using 2 each 6X21

Bolt (12) and 2 each Washer (13) with a

Phillips Screw Driver.

LLR44311_F.indd 8LLR44311_F.indd 8 3/4/11 12:51 PM3/4/11 12:51 PM

Page 9 of 27

Step 13

Using a Phillips Screw Driver attach the

Left General Slide (19) and Right General

Slide (17) to the 2 each Box Drawer Side

Panels (L) with 6 each 4X10 Screws (10).

Note the hole location to be used on the

drawing for placement of General Slide.

Step 14

Attach the Box Drawer Front and Back

Panel (M) to the Bottom Panel (N)

making sure that the Bottom Panel (N)

fits securely into the groove located in the

Back Panel (M).

Attach the Box Drawer Side Panels (L)

with 8 each 4X40 Screws (5) to the Box

Drawer Front and Back Panel (M).

Attach the Box Drawer Face Panel (K) to

the Box Drawer Front Panel (M) with 2

each 6X21 Bolt (12) and Washer (13).

Insert the completed File Drawer from

step 12 into the Computer Desk as shown.

Insert the 2 each File Bar (21) in the

File Drawer as shown on the drawing.

Ensure that the lock mechanism functions

properly and adjust the Lock Plate (8) as

needed.

Insert the completed Box Drawer into the

Computer Desk as shown.

YOU HAVE SUCCESSFULLY COMPLETED THE ASSEMBLY OF THIS COMPUTER DESK.

THANK YOU FOR PURCHASING THIS PRODUCT!

LLR44311_F.indd 9LLR44311_F.indd 9 3/4/11 12:51 PM3/4/11 12:51 PM

Inhaltsverzeichnis

Sprachen:

Andere Lorell Inneneinrichtung Handbücher

Lorell

Lorell LLR60600 Bedienungsanleitung

Lorell

Lorell LLR60340 Bedienungsanleitung

Lorell

Lorell LLR66984 Bedienungsanleitung

Lorell

Lorell 69372 Bedienungsanleitung

Lorell

Lorell 69424 Bedienungsanleitung

Lorell

Lorell LLR63280 Bedienungsanleitung

Lorell

Lorell LLR34414 Bedienungsanleitung

Lorell

Lorell LLR60601 Bedienungsanleitung

Lorell

Lorell Managerial Mid-Back Chair LLR86209 Bedienungsanleitung

Lorell

Lorell 69436 Bedienungsanleitung

Lorell

Lorell 60268 Bedienungsanleitung

Lorell

Lorell LLR25959 Bedienungsanleitung

Lorell

Lorell LLR84863 Bedienungsanleitung

Lorell

Lorell LLR47920 Bedienungsanleitung

Lorell

Lorell 59632 Bedienungsanleitung

Lorell

Lorell LLR86210 Bedienungsanleitung

Lorell

Lorell LLR46697 Bedienungsanleitung

Lorell

Lorell LLR44216 Bedienungsanleitung

Lorell

Lorell 60602 Bedienungsanleitung

Lorell

Lorell 60114 Bedienungsanleitung

Lorell

Lorell LLR86202 Bedienungsanleitung

Lorell

Lorell LLR84390 Bedienungsanleitung

Lorell

Lorell 60603 Bedienungsanleitung

Lorell

Lorell LLR63282 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung