Lorex SG19LD80 Series Betriebsanleitung

19” LCD / 8 CHANNEL DVR

COMBO WITH 160GB HDD

& 4 CAMERAS

Troubleshooting the

Remote Control

MODEL:

SG19LD80 Series

www.lorexcctv.com

The Remote Has Stopped Working

The remote control has been working properly, however it has suddenly stopped functioning.

Outlined below are several techniques to help diagnose the problem:

1. Point your remote control at one of your cameras, and press and hold the RETURN button.

The camera is able to detect the Infrared signal from the Remote Control, and will display on the

Observation Screen as a flashing light.

If the remote control light does not FLASH onscreen, then the batteries in the Remote Control will

need to be replaced.

2. The remote control has the ability to control several Observation Systems at one time with the

push of a button. This is useful if you have several SG19LD800 Series systems installed at one

location - each system can be set to a different ID.

By default, the SG19LD800 Series Observation System is set to System ID #1. If the remote is

NOT set to control System ID #1, it will not function with the unit. To reset the remote control:

I. Confirm that the R is white on the bottom onscreen status bar. If the Ris blue, please proceed

to Step II.

II. Press the REMOTE ID button (see next page for Remote Control diagram). The status bar will

display a GEAR symbol indicating that the remote is in Program Mode.

III. Press the number 1 button on the remote control.

IV. Press the ENTER button on the remote control.

V. Press the RETURN button on the remote control.

For advanced setup of multiple systems, please refer to the Users’ Manual provided with your

product.

• Indicates the remote is active

with the System

• Indicates the remote is not

active with the System.

Remote Control

Listed below is a quick reference for the Remote Control.

CHANNEL BUTTONS -

Press to select a

specific camera by

number

RETURN BUTTON -

Returns to the previous

selection in Menu Mode.

Exits the Menu Setup

when in the Main Menu.

DISP BUTTON -

Changes the Screen

Mode to Single, Quad, 6

or 8 camera views.

SEQUENCE -

Turns camera

Sequence Mode ON/

OFF.

POWER BUTTON -

Turns the system power

ON/OFF

SETUP BUTTON -

Opens the Main Menu

(system setup)

ENTER BUTTON -

Applies a configuration

change in Menu Mode.

SEARCH BUTTON -

Enters the Search

Menu.

ZOOM -

Zooms in on the current

image

NAVIGATION AND

PLAYBACK -

Controls the playback of

video.

Navigates in MENU and

SEARCH mode.

Adjusts the zoomed

area in ZOOM mode.

NOTE: All Buttons described above function the same as the Front Panel buttons - see pages

10-13 of the Observation System Manual for detailed information. Buttons without descriptions do

not provide functionality to this unit.

REMOTE ID* -

Configure when using

multiple systems.*

* If the REMOTE ID button is set incorrectly, the remote will not function. To reset the

Remote ID (when using only one system), Press the ID button, and then select the number

1. Press ENTER to reset the remote, and press RETURN to exit the ID Screen.

AUDIO SELECT -

Press to select an audio

channel. Press the

Audio select button,

then a channel 1~4.

VOLUME +

VOLUME -

PTZ -

Controls PTZ Cameras

It’s all on the web

Product Information

User Manuals

Quick Start Guides

Specification Sheets

Software Upgrades

Firmware Upgrades

Lorex Technology Inc.

VISIT

www.lorexcctv.com

Inhaltsverzeichnis

Andere Lorex Sicherheitssystem Handbücher

Lorex

Lorex LW2201 Series Bedienungsanleitung

Lorex

Lorex LW2700 SERIES Bedienungsanleitung

Lorex

Lorex SG19LD804-161 Installationsanleitung

Lorex

Lorex LW2301 Series Bedienungsanleitung

Lorex

Lorex LHB926 Series Bedienungsanleitung

Lorex

Lorex LHB926 Series Bedienungsanleitung

Lorex

Lorex SG6331 Bedienungsanleitung

Lorex

Lorex SG17LD800 Bedienungsanleitung

Lorex

Lorex WA-410 Bedienungsanleitung

Lorex

Lorex LW1200 Series Bedienungsanleitung

Lorex

Lorex LW2100 Series Bedienungsanleitung

Lorex

Lorex SG21FD3044-161 Bedienungsanleitung

Lorex

Lorex LW2710 Series Bedienungsanleitung

Lorex

Lorex SG21CD7444UQ-A80 Bedienungsanleitung

Lorex

Lorex SG21FD3044-161 Montageanleitung

Lorex

Lorex SG6130 Bedienungsanleitung

Lorex

Lorex LW2750 Series Bedienungsanleitung

Lorex

Lorex SHS-4QM2 Bedienungsanleitung

Lorex

Lorex SG17L7584 Bedienungsanleitung

Lorex

Lorex WA-410 Bedienungsanleitung

Lorex

Lorex L14Q684C Bedienungsanleitung

Lorex

Lorex 12 B&W 4 Channel Observation system Bedienungsanleitung

Lorex

Lorex LH314321 Leitfaden

Lorex

Lorex LW2002BAC1 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung