Lorex SG6331P Bedienungsanleitung

2.4 GHz Wireless

B&W Video Security System

with 1 camera

Instruction Manual

English Version1.0

MODEL:

SG6331P

www.lorexinternational.com

Explanation of two Symbols

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the

presence of uninsulated "dangerous voltage“ within the

product's enclosure that may be of sufficient magnitude to

constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is

intended to alert the user to the presence of important

operating and maintenance(servicing) instructions in

the literature accompanying the appliance.

THE GRAPHIC SYMBOLS WITH SUPPLEMENTAL MARKING ARE ON

THE BOTTOM OF THE SYSTEM.

WARNING: To prevent fire or shock hazard, do not expose this unit to

rain, water, or wet locations. Do not insert any metallic object

through the ventilation grills.

FCC CLASS B NOTICE

Note:

This equipment has been tested and found to comply with the limits For a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instruction, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, (which can be determined by turning the equipment off

and on), the user is encouraged to try to correct the interference by one or more

of the following measures:

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

• Reorient or relocate the receiving antenna

• Increase the separation between the monitor and the camera.

• Connect the equipment into an outlet on a circuit different from that to which

other devices may be connected.

• Consult the dealer or an experienced radio or television technician for help.

SAFETY INSTRUCTIONS

IMPORTANT SAFEGUARDS

All the safety and operating instructions should be read before the

Appliance is operated and retained for future reference.

1. HEED WARNINGS - All warnings on the appliance and in the operating

instructions should be adhered to.

2. FOLLOW INSTRUCTIONS - All operating instructions should be

followed.

3. WATER AND MOISTURE - Do not use this video product near water –

for example, a bath tub, wash bowl, kitchen sink, laundry tub or

swimming pool, or in a wet basement.

4. POWER SOURCES - This product should be operated only from the type

of power source indicated on the marking label.

5. OVERLOADING - Do not overload outlets and extension cords, which

can result in a risk of fire or electric shock.

6. SERVICING - Do not attempt to service this product yourself. Opening or

removing covers may expose you to dangerous voltage or other hazards.

Refer all servicing or repairs to qualified service personnel.

7. DAMAGE REQUIRING SERVICE - Unplug this product from the wall

outlet and refer servicing or repairs to qualified service personnel under

the following conditions:

a. When the power supply cord or plug is damaged.

b. If liquid has been spilled or objects have fallen into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the operating

instructions. Adjust only those controls that are covered by the

operating instructions.

e. If the product has been dropped or the cabinet has been damaged.

f. When the product exhibits a distinct change in performance.

8. REPLACEMENT PARTS - When replacement parts are required, be

sure the service technician has used replacement parts that are

specified by the manufacturer or have the same characteristics as the

original part. Unauthorized substitutions may result in fire, electric

shock, or other hazards.

9. SAFETY CHECK - Upon completion of any service or repairs to this

video product, ask the service technician to perform safety checks to

determine if the video product is in proper operating condition.

10. An appliance and cart combination should be moved with care.

Do not place this equipment on an unstable cart, stand, or table.The

equipment may fall, causing serious injury to a child or adult, and

serious damage to the equipment. Wall or shelf mounting should

follow the manufacturer's instructions and should be done with

a mounting kit approved by the manufacturer.

TABLE OF CONTENTS PAGE

iii

INTRODUCTION & FEATURES………………………………………

SYSTEM INCLUDES…………………………………………………..

CONTROLS AND FUNCTIONS

Monitor …....................................….……………………..……...

Camera ...….……………..............................……….……...……

INSTALLATION

Camera ......................................................……………….…....

Monitor .....................................................................………......

SYSTEM OPERATION

Additional camera connection…………………………………….

Auto Scanning………………………………………………………

Auto & Manual Viewing Options………………………………….

Selectable Dwell Settings…………………………………………

Connecting The Monitor To A VCR ……...………………..…….

OPTIONAL ACCESSORIES ..........................................................

TROUBLE SHOOTING ..............................................………..…...

TECHNICAL SPECIFICATIONS ....................................................

CARE & MAINTENANCE……………………………..……………….

INTRODUCTION:

Thank you for purchasing the 2.4 GHz Wireless B&W Video System.

This is an ideal solution for monitoring your business or home, or for

safeguarding your valuables. The package contains a 5.5” B&W

Monitor, and 1 wireless B&W camera.

The system allows you to automatically scan between locations with the

convenience of connecting up to 4 cameras (additional cameras sold

separately). Use the Listen-in Audio feature to pick up sound within a

specific location. Avoiding the hassle of running wires, this system is

easy to install and operate for your immediate security applications.

The RCA audio/video outputs also allow you to connect a time lapse

VCR or standard VCR for recording purposes.

To learn more about this 2.4GHz Wireless B&W Video System and our

complete range of accessory products, please visit our website at:

www.lorexinternational.com

FEATURES:

• Auto Scanning – Up to 4 cameras

• Wireless range of up to 300 ft (open space, no obstacles)

• Sequential or Full Screen Viewing options

• Listen-in Audio

• Built-in Speaker with volume control

• Audio/Video outputs allow user to record picture to any standard VCR

• LED indicator lights show system status

• Camera with battery option (4 “AA” batteries, not included)

• Monitor with battery option (10 “C” batteries, not included)

• Camera ideal for ceiling, wall or table mounting

SYSTEM INCLUDES:

5.5” – 2.4 GHz B&W Monitor 1 - 2.4 GHz B&W Wireless Camera

with camera stand & screws

Also includes:

1 – 9V DC 500mA Adapter (Camera)

with battery option (4 “AA”, not included)

1 – 13.8V DC 1000mA Adapter (Monitor)

with battery option (10 “C”, not included)

1 – RCA Audio/Video Cables

Mounting hardware

Window decals

Owner’s Manual

MONITOR CONTROLS – FRONT & BACK PANEL

MONITOR BACK VIEWMONITOR FRONT VIEW

Location of Receiver Monitor controls

1. 2.4GHz Antenna - High gain dipole patch antenna receives audio

and video signal from the camera.

2. CRT - 5.5” Diagonal Screen

3. Brightness Control – Allows you to adjust the brightness of the picture

4. Channel Selector - Switches between channel 1-4 / AUTO selection.

5. Auto/Manual Button - Allows you to switch from AUTO mode to the

MANUAL mode

6. Audio Mute Button – Push this button to mute the sound on the monitor

7. Volume Control – Turn this dial to adjust the volume on the monitor

8. ON/OFF Switch – Used to switch the power on the monitor ON or OFF

9. Battery Compartment (not shown) – Requires 10 “C” Batteries (not

included).

10. Speaker - Emits sound from the camera location

11. DC Input Jack – Connect to the supplied 13.8V DC 1.0A AC adapter.

12. Audio Output Jack - RCA jack for Audio output connection

13. Video Output Jack - RCA jack for Video output connection

14. Contrast Control – Allows you to adjust the contrast of the picture

11 12 13 14

45678

CAMERA CONTROLS

1. Microphone – Built-in condenser microphone provides listen-in audio

capability from camera to monitor

2. Lens – B&W CMOS Image Sensor

3. 6 Infrared LED’s – Enhances the picture quality in low light conditions

4. Channel Selector Switch – Slide switch for channels 1-4

5. ON/OFF Power Switch – Controls power to the camera. Note: Please

ensure that you set the switch to the OFF position before plugging the

AC adapter into the unit

6. Battery Compartment – Optional 4 “AA” batteries (not included) can

be used to power the camera

7. Bracket – Metal bracket connects to camera for mounting to walls,

ceilings or table

8. DC IN Jack – Connects to the 9V DC (500mA) adapter.

9. 2.4GHz Antenna – High gain dipole antenna sends audio and video

signals to the monitor

Back View

Front/Side View

CAMERA INSTALLATION

1. Attach the stand base to the wall or ceiling where you want to install the

camera. Locate a wall stud or ceiling, and secure the bracket using the

four supplied screws.

2. Attach the camera to the stand and firmly tighten the swivel.

3. Attach the camera with the stand to the stand base, and firmly tighten the

joint knob on the stand base.

4. Connect the supplied 9V 500mA DC adapter to the DC IN jack at the rear

of the camera, and plug it into an electrical outlet.

If you are not using AC power (9V 500mA adapter) then you have the

option of using 4 “AA” alkaline batteries in your camera.

1. Ensure the power switch on the camera is turned OFF.

2. Carefully slide open the battery compartment (bottom of camera)

3. Insert 4 “AA” batteries (not included) into the compartment noting the

polarity

Warning: to prevent damage to the unit, ensure the batteries are

aligned properly and battery types are not mixed

4. Close the compartment and turn camera “ON”

Ensure the power switch on the monitor and camera are set to

the OFF position before proceeding with the following steps.

NOTE

To 9V Power

Adapter

BATTERY CASE & COMPARTMENT

Remove the battery case by unscrewing the bolt at the bottom of the

monitor and sliding the battery case out. This system requires 10 ‘C’ sized

batteries (not included)

Plug

Warning : To prevent damage to the unit, ensure that the batteries are

aligned properly and battery types are not mixed.

Your wireless monitor has both AC or battery option. When using the

AC option with rechargeable batteries, your monitor will automatically

switch to back up battery feature during a power outage providing you with

uninterrupted power to the monitor. The battery option also provides you

the flexibility to move the monitor from room to room. Battery life is

approximately 2 –3 hours

1. Connect the supplied 13.8V AC adapter to the DC INPUT JACK at the

rear of the receiver monitor and plug it into an electrical outlet.

DC INPUT Jack

13.8V 1.0 A

AC Adapter

MONITOR INSTALLATION

Inhaltsverzeichnis

Andere Lorex Sicherheitssystem Handbücher

Lorex

Lorex L20WD800 Series Bedienungsanleitung

Lorex

Lorex LW2002BAC1 Bedienungsanleitung

Lorex

Lorex SG21281UQ-A Bedienungsanleitung

Lorex

Lorex L17LD420 Series Bedienungsanleitung

Lorex

Lorex SG19LD804-161 Installationsanleitung

Lorex

Lorex LW2002B Series Bedienungsanleitung

Lorex

Lorex SG21FD3044-161 Bedienerhandbuch

Lorex

Lorex DVM2050 Bedienungsanleitung

Lorex

Lorex SG6352 Bedienungsanleitung

Lorex

Lorex SG21CD7444UQ-A80 Bedienungsanleitung

Lorex

Lorex H32A Series Bedienungsanleitung

Lorex

Lorex SG15F6584 Bedienungsanleitung

Lorex

Lorex LW292 SERIES Bedienungsanleitung

Lorex

Lorex LW2960 SERIES Bedienungsanleitung

Lorex

Lorex L23WD SERIES Bedienungsanleitung

Lorex

Lorex LW2960 SERIES Bedienungsanleitung

Lorex

Lorex LW1012 Series Bedienungsanleitung

Lorex

Lorex SHS-4WLS Bedienungsanleitung

Lorex

Lorex LH120 Series Bedienungsanleitung

Lorex

Lorex LW2760 Series Bedienungsanleitung

Lorex

Lorex SGQ4160 Bedienungsanleitung

Lorex

Lorex SHS-2S7LD Series Bedienungsanleitung

Lorex

Lorex SG15F6584 Bedienungsanleitung

Lorex

Lorex SHS-2S7LDP series Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung