Loxjie D30 Bedienungsanleitung

USER MANUAL

D30

60 PRE

USB

768kHz

The D30 is a desktop digital to analog converter and headphone amplifier from

the Loxjie brand! Adopting AKM's flagship audio DAC chip AK4497, ultra-high

signal-to-noise ratio, ultra-low distortion, and fine-tuned circuits and sound

performance make it perfect for desktop audiophile application!

Introduction

D30

Features

AKM's new AK4493 chip, and carefully adjusted it to an unprecedented

0.00017% (-115dB) ; Dynamic range up to 121dB.

The second-generation XMOS solution, PCM supports up to 32bit/768kHz,

and DSD supports up to DSD512.

Low phase noise high precision clock system.

Specially designed low-noise regulated power supplies to provide low-noise

power for analog circuits.

Bluetooth 5.0 digital audio input, support APT-X, external antenna, transmission

distance is farther.

Built-in multiple PCM formats digital filters .

Use a lot of audio grade components.

One-key screen off function.

With pre-amp function, output up to 3Vrms, easily drive active speakers,

and it has DSD pass-through function.

Carefully tuned performance and sound.

High-resolution full-view color IPS display.

Humanized operation with OLED display.

Full-function remote control operation, all functions have memory.

JAS Hi-Res certification.

D30

Specification

Inputs ..........................................................USB / Optical / Coaxial / Bluetooth

Headphone amplifier power

.................................................

110mW X 2 (32Ω)

Output Level......................................................Pre mode 3.0 Vrms

.........................................................................Fixed mode 2.2 Vrms

.........................................................................DSD bypass mode 2.0 Vrms

THD+N(UN-WTD).............................................................. 0.00017%(-115dB)

Dynamic range (UN-WTD)...................................................................... 121dB

SNR (UN-WTD)......................................................................................121dB

Bluetooth ..............................................................BT 5.0 (support APT-X , SBC)

Output Impedance.............................................Line 320Ω

Headphone 1.1Ω

USB transmission ........................................................................Asynchronous

USB compatibility .......................................................Windows 7 / 8 / 8.1 / 10

Mac OS X10.6 or Later / Linux

Bit depth

USB ........................................................................................1bit ~ 32bit

Optical/coaxial .....................................................................16bit ~ 24bit

Sampling rate:

USB ..................................................................................44.1 ~ 768kHz

DSD64, DSD128, DSD256, DSD512

Optical/coaxial ...................................................................44.1 ~ 192kHz

Power Consumption ...................................................................................3W

Standby power .....................................................................................＜0.1W

Size .................................................................... 151 X 170 X 38 mm(WxHxD)

package size.........................................................269 X 233 X 74 mm(WxHxD)

Weight ...................................................................................................535 g

Firmware and driver download:

http://www.loxjie-audio.com/

support

Remote control

D30

Install 2 x AAA batteries as instructions.

When using the remote control, point it toward the remote con-trol signal receiver on

the main unit from a distance of 5 m (16 ft) or less. Do not place obstructions

between the main unit and the remote control.

The remote control might not work if the remote control signal receiver on the unit is

exposed to direct sunlight or bright light. If this occurs, try moving the unit.

Beware that use of this remote control could cause the unin-tentional operation of

other devices that can be controlled by infra.

This remote controller use 2 x R03/AAA batteries.

Note:

Power ON/OFF

Mute/Long press to BT reconnect

Menu/OK

Enter menu

Output switch

Input switch

Display dimmer

No function

Up/down select

Volume +

Volume -

Digital filter switch

Exit menu

Knob

6.35mm headphone jack

Display

Remote window

Bluetooth antenna

Line Out

Parts Names

D30

Optical input

Coaxial input

USB input

AC IN(100~240V AC)

Power switch

AC IN 1 00 ~240V

HI GH RE SOL UT IO N DA C

123

7 8 9 10 11

Function and operation instructions

D30

There are 8 pages of settings

in this menu:

Input

Output

Filter

Pre mode

Color

BT Clear

Dimmer

Main Display:

Output

Line out，Headphones out

Volume Level

Pre mode

Input

Sampling rate

INPUT SETTING:

Bluetooth

USB audio

Coaxial

Optical

38 PRE

USB

768kHz

1 2 3

INPUT SETTING

Bluetooth

USB audio

Coaxial

Optical

SETUP MENU

Input

Output

Filter

Pre mode

Color

BT Clear

Dimmer

Function and operation instructions

D30

PCM FILTER:

FL1 (Sharp)

FL2 (Slow)

FL3 (Short sharp)

FL4 (Short Slow)

FL5 (Super Slow)

FL6 (LD Short)

OUTPUT SETTING:

RCA

Headphones

OUTPUT SETTING

RCA

Headphones

FILTER

Sharp

Slow

Short Sharp

Short Slow

Super Slow

LD Short

PRE MODE：

ON(variable)

OFF(fixed)

OFF(DDSD) Note

PRE MODE

ON(variable)

OFF(fixed)

OFF(DDSD)

Note

This mode is DSD bypass, the DSD signal does not pass through the

volume processor part, so the DSD playback performance may be better,

but in this mode, the output level is a little smaller than normal mode.

COLOR:

White

Red

Green

Blue

Yellow

Cyan

Orange

Purple

Function and operation instructions

D30

BT List clear:

BT Cleared！

(The paired device was cleared!)

Turn to Clear

(Press the "up" or "down" buttons of the

remote control to clear paired device.)

COLOR

White

Red

Green

Blue

Yellow

Cyan

Orange

Purple

BT list clear

Turn to clear

How to use Bluetooth:

1. Connection: switch the input source to Bluetooth, turn on the Bluetooth

function of the mobile phone, search "Loxjie BT5.0B", and click Connect after

searching. When the mobile phone displays "connected", the connection is

successful;

2. Clear: When Bluetooth is connected to other devices or cannot be connected,

try to remove the currently connected device list of Bluetooth, enter the menu of

BT clear, press the "up" or "down" button on the remote control to clear the

Bluetooth connected device list. At this time, please use the mobile phone you

want to connect to connect again. If the current input is not Bluetooth, this setting

is invalid, and the operation will display "it's not BT!" , please switch to Bluetooth

and try again!

3. Reconnect: when the transmission distance is exceeded or the connection is

interrupted, hold the input source button on the remote control to reconnect!

Dimmer：

Always ON

Auto Off

DIMMER

Always ON

Auto Off

Andere Handbücher für D30

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Loxjie Verstärker Handbücher

Loxjie

Loxjie A30 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung