LSI CTS 2600 Handbuch

LSI CTS2600 Controller-Drive

Tray

Initial Setup Guide

47989-00, Rev. A

http://www.lsi.com/systembuilder

Proprietary Rights Notice

This document contains proprietary information of LSI Corporation. The information contained herein is

not to be used by or disclosed to third parties without the express written permission of an officer of LSI

Corporation.

Document Description

Document 47989-00, Rev. A . July 2010.

This document will remain the official reference source for all revisions and releases of this product until

rescinded by an update.

Disclaimer

It is the policy of LSI Corporation to improve products as new technology, components, software, and

firmware become available. LSI reserves the right to make changes to any products herein at any time

without notice. All features, functions, and operations described herein may not be marketed by LSI in all

parts of the world. In some instances, photographs and figures are of equipment prototypes. Therefore,

before using this document, consult your LSI representative for information that is applicable and

current. LSI DOES NOT ASSUME ANY RESPONSIBILITY OR LIABILITY FOR THE USE OF ANY PRODUCTS

DESCRIBED HEREIN EXCEPT AS EXPRESSLY AGREED TO IN WRITING BY LSI.

LSI products are not intended for use in life-support appliances, devices, or systems. Use of any LSI

product in such applications without written consent of the appropriate LSI officer is prohibited.

License Restriction

The purchase or use of an LSI Corporation product does not convey a license under any patent,

Trademark Acknowledgments

LSI, the LSI logo, HotScale, SafeStore, SANshare, SANtricity, Simplicity, and XBB are trademarks or

registered trademarks of LSI Corporation. All other brand and product names may be trademarks of their

respective companies.

LSI CTS2600 Controller-Drive Tray Initial Setup Guide i

Step 1 – Preparing for an Installation.........................................................................................1

Step 2 – Deciding on the Management Method..................................................................17

Step 3 – Installing and Configuring the Switches................................................................23

Step 4 – Installing the Host Bus Adapters...............................................................................27

Step 5 – Installing the Controller-Drive Tray..........................................................................31

Step 6 – Connecting the Controller-Drive Tray to the Hosts ...........................................37

Step 7 – Connecting the Controller-Drive Tray to the Drive Trays ................................45

Step 8 – Connecting the Ethernet Cables...............................................................................55

Step 9 – Connecting the Power Cords .....................................................................................57

Step 10 – Turning on the Power and Checking for Problems .........................................59

Step 11 – Installing the SANtricity ES Storage Manager Software.................................77

Step 12 – Configuring the Host Bus Adapters.......................................................................89

Step 13 – Starting SANtricity ES Storage Manager..............................................................97

Step 14 – Adding the Storage Array ...................................................................................... 101

Step 15 – Naming the Storage Array ..................................................................................... 105

Step 16 – Configuring the Storage Array in Simplex Mode...........................................107

Step 17 – Resolving Problems.................................................................................................. 111

Step 18 – Adding Controller Information for the Partially Managed Storage Array113

Step 19 – Manually Configuring the Controllers............................................................... 115

Step 20 – Setting a Password .................................................................................................. 123

Contents

ii LSI CTS2600 Controller-Drive Tray Initial Setup Guide

Step 21 – Removing a Storage Array......................................................................................125

Step 22 – Configuring Email Alerts and SNMP Alerts.......................................................127

Step 23 – Changing the Cache Memory Settings..............................................................129

Step 24 – Enabling the Premium Features...........................................................................133

Step 25 – Defining the Hosts.....................................................................................................135

Step 26 – Configuring the Storage .........................................................................................141

Appendix A – Setup Instructions for Windows Server 2008 Server Core...................147

Regulatory Compliance Statements .......................................................................................155

LSI CTS2600 Controller-Drive Tray Initial Setup Guide 1

Step 1 – Preparing for an Installation

Storage arrays for 6-Gb SAS drives consist of a CTS2600 controller-drive tray, or a

CTS2600 controller-drive tray and one or more CTS2600-12 plus ESM or CTS2600-24

plus ESM drive trays in a cabinet. Use this initial setup guide to install the CTS2600

controller-drive trays. Refer to the DE1600 Drive Tray Initial Setup Guide and the DE5600

Drive Tray Initial Setup Guide for instructions for installing those drive trays. Table 1

shows the various configuration options.

Table 1 CTS2600 Controller-Drive Tray Options

CTS2600

Configurations Options

Simplex (one controller)

CTS2600 controller-

drive tray with no host

interface card

A maximum of 96 drives.

A configuration of a single CTS2600 controller-drive tray attached

to a single CTS2600-12 plus ESM drive tray or a single CTS2600-24

plus ESM drive tray.

Two 6-Gb/s host connectors.

2-Gb battery backup to a flash drive on power loss.

Simplex CTS2600

controller-drive tray

with a host interface

card

A maximum of 96 drives.

A configuration of a single CTS2600 controller-drive tray attached

to a single CTS2600-12 plus ESM drive tray or a single CTS2600-24

plus ESM drive tray.

Two 6-Gb/s host connectors, in addition to one of the following

host interface cards:

•Two 6-Gb/s SAS connectors

•Four 1-Gb/s iSCSI connectors

•Four 8-Gb/s Fibre Channel (FC) connectors

2-Gb battery backup to a flash drive on power loss.

Preparing for an Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 LSI CTS2600 Controller-Drive Tray Initial Setup Guide

ATTENTION Possible hardware damage – To prevent electrostatic discharge

damage to the tray, use proper antistatic protection when handling

tray components.

Duplex (two controllers)

CTS2600 controller-

drive tray without a

host interface card

A maximum of 96 drives.

A configuration of a single CTS2600 controller-drive tray attached

to up to seven additional CTS2600-12 plus ESM drive trays, three

additional CTS2600-24 plus ESM drive trays, or any combination of

CTS2600-12 plus ESM drive trays and CTS2600-24 plus ESM drive

trays for a maximum of 96 drives in the storage array.

Two 6-Gb/s host connectors.

2-Gb battery backup to a flash drive on power loss, with an option

to upgrade to a 4-Gb battery.

Duplex CTS2600

controller-drive tray

plus FC, SAS, or SCSI

controller with a host

interface card

A maximum of 96 drives in the storage array.

A configuration of a single CTS2600 controller-drive tray attached

to a up to seven additional CTS2600-12 plus ESM drive trays, three

additional CTS2600-24 plus ESM drive trays, or any combination of

CTS2600-12 plus ESM drive trays and CTS2600-24 plus ESM drive

trays for a maximum of 96 drives in the storage array.

Two 6-Gb/s host connectors, in addition to one of the following

host interface cards:

•Two 6-Gb/s SAS connectors

•Four 1-Gb/s iSCSI connectors

•Four 8-Gb/s FC connectors

2-Gb battery backup to a flash drive on power loss, with an option

to upgrade to a 4-Gb battery.

Navigational Aid

“Key Terms”Page3

“Gathering Items”Page3

“Things to Know – SFP Transceivers and Fiber-Optic, iSCSI, and SAS

Cables”

Page 8

“Things to Know – Taking a Quick Glance at the Hardware”Page10

“For Additional Information”Page15

CTS2600

Configurations Options

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Key Terms

LSI CTS2600 Controller-Drive Tray Initial Setup Guide 3

Key Terms

controller-drive tray

One tray with drives, one or two controllers, fans, and power supplies. The controller-

drive tray provides the interface between a host and a storage array.

drive tray

One tray with drives, one or two environmental services monitors (ESMs), power

supplies, and fans. A drive tray does not contain controllers.

Small Form-factor Pluggable (SFP) transceiver

A component that enables Fibre Channel duplex communication between storage

array devices. SFP transceivers can be inserted into host bus adapters (HBAs),

controllers, and environmental services monitors (ESMs). SFP transceivers can support

either copper cables (the SFP transceiver is integrated with the cable) or fiber-optic

cables (the SFP transceiver is a separate component from the fiber-optic cable).

storage array

A collection of both physical components and logical components for storing data.

Physical components include drives, controllers, fans, and power supplies. Logical

components include volume groups and volumes. These components are managed by

the storage management software.

Gathering Items

Before you start installing the controller-drive tray, you must have installed the cabinet

in which the controller-drive tray will be mounted.

Use the tables in this section to verify that you have all of the necessary items to install

the controller-drive tray.

Preparing for an Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 LSI CTS2600 Controller-Drive Tray Initial Setup Guide

Basic Hardware

Table 2 Basic Hardware

Item Included with

the Controller-

Drive Tray

Cabinet

•Make sure that your cabinet meets the installation

site specifications of the various CTS2600 storage

array components. Refer to the Storage System Site

Preparation Guide for more information.

•Depending on the power supply limitations of your

cabinet, you might need to install more than one

cabinet to accommodate the different components

of the CTS2600 storage array. Refer to the

installation guide for your cabinet for instructions

on installing the cabinet.

Mounting rails and screws

Fibre Channel switch (optional)

Gigabit Ethernet switch (optional)

•Host with Fibre Channel host bus adapters (HBAs)

(optional)

•Host with iSCSI HBAs (optional) or a network

interface card (optional)

•Host with SAS HBAs (optional)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ga thering Items

LSI CTS2600 Controller-Drive Tray Initial Setup Guide 5

Cables and Connectors

Table 3 Cables and Connectors

Item Included with the

Controller-Drive

Tray

AC power cords

The controller-drive tray ships with power cords for

connecting to an external power source, such as a wall

plug. Your cabinet might have special power cords that

you use instead of the power cords that ship with the

controller-drive tray.

Fibre Channel cables (optional)

Use these cables for connections to the hosts.

Small Form-factor Pluggable (SFP) transceivers (optional)

•The SFP transceivers connect fiber-optic cables to host

ports and drive ports.

•Depending on your connection requirements, you

might need to purchase additional SFP transceivers

(two SFP transceivers for each fiber-optic cable).

•You must purchase only Restriction of Hazardous

Substances (RoHS)-compliant SFP transceivers.

Ethernet cable (optional)

This cable is used for out-of-band storage array

management and for 1-Gb/s iSCSI connections.

For information about out-of-band storage array

management, see the description for “Deciding on the

Management Method” on page 17.

SAS cables (optional)

The SAS cables connect the host to the controller-drive

tray. If you install a drive tray, you will need to use SAS

cables to connect the controller-drive tray to the

drive tray.

Preparing for an Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6 LSI CTS2600 Controller-Drive Tray Initial Setup Guide

Product DVDs

Table 4 Product DVDs

Tools and Other Items

Table 5 Tools and Other Items

Item Included with

the Controller-

Drive Tray

Firmware DVD

•Firmware is already installed on the controllers.

•The files on the DVD are backup copies.

SANtricity ES Storage Manager Installation DVD

•SANtricity ES Storage Manager software and

documentation.

•To access product documentation, download the

DVD image from http://www.lsi.com/systembuilder.

Item Included with

the Tray

Labels

Help you to identify cable connections and let you

more easily trace cables from one tray to another

A cart

Holds the tray and components

A mechanical lift (optional)

A Phillips screwdriver

A flat-blade screwdriver

Inhaltsverzeichnis

Andere LSI Controller Handbücher

LSI

LSI 3ware 9690SA Referenzhandbuch

LSI

LSI LSI53C895A Bedienungsanleitung

LSI

LSI LSI53C876 Bedienungsanleitung

LSI

LSI MegaRAID SCSI 320-1 Bedienungsanleitung

LSI

LSI MegaRAID SCSI 320-2E Bedienungsanleitung

LSI

LSI MegaRAID SAS Bedienungsanleitung

LSI

LSI MegaRAID Express 300 Bedienungsanleitung

LSI

LSI MegaRAID SCSI 320-0 Zero-Channel RAID Controller Series... Bedienungsanleitung

LSI

LSI MegaRAID SAS 9361-4i Bedienungsanleitung

LSI

LSI MegaRAID SATA 8308ELP Bedienungsanleitung

LSI

LSI LSI53C896 Bedienungsanleitung

LSI

LSI LSI53C1030 Bedienungsanleitung

LSI

LSI MegaRAID SATA150-2 Bedienungsanleitung

LSI

LSI LS7280 Bedienungsanleitung

LSI

LSI MegaRAID SAS 8300XLP Bedienungsanleitung

LSI

LSI MegaRAID SCSI 320-0 Zero-Channel RAID Controller Series... Montageanleitung

LSI

LSI MegaRAID SCSI 320-0 Zero-Channel RAID Controller Series... Kurzanleitung

LSI

LSI MegaRAID SAS 9260-16i RAID Controller Bedienungsanleitung

LSI

LSI LSI53C1510 Bedienungsanleitung

LSI

LSI LSISAS1068 Bedienungsanleitung

LSI

LSI MegaRAID SATA 300-8XLP Bedienungsanleitung

LSI

LSI MTY-0.5A Handbuch

LSI

LSI LSI53C1000 Bedienungsanleitung

LSI

LSI Avago SAS 9206-16e Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung