LSIS H100 Bedienungsanleitung

LSIS H100 Quick Start Guide

1 LS H100 Quick Start Guide

Rev I_6-19-2017

1. H100 Basic Setup Parameters

The basic drive and motor parameters are shown in Table 1. Set the parameters according to your application.

Table 1. H100 Basic Setup Parameters

Note: Many applications will not require changes to the basic setup parameters from their default values.

1.1 H100 Recommended Additional Parameter Changes

The H100 drive has some default settings the user may want to change to obtain better protection of the

drive/motor and the application. These changes are recommended, but not needed for all applications.

Auto Reset

•Program CON 71 bit 3 to High State (0100).

•Program PRT 08 (Reset/Restart after a fault) to “1” (Yes).

•Program PRT 09 (Number of Retries) to a number between 0 -10.

•Program PRT 10 (Auto Reset Time) to desired time to allow cause of fault to clear and safe starting.

Start on Power Loss

•Program ADV 10 (Power on Start) to “1” (Yes).

Phase Loss

•Program PRT 05 (Phase Loss) to detect input and/or output phase loss.

Note: This parameter is displayed as DIP switches on the H100. Left bit is the Input, Right bit is the Output.

2. HP to kW Conversion Table

Use the following conversion table to enter the motor HP. Select the closest size the drive allows in kW (motor

power is in kW on most LSIS drives)

LSIS H100 Quick Start Guide

2 LS H100 Quick Start Guide

Rev I_6-19-2017

Table 3. HP to kW Conversion

3. RPM Entry

Table 4. Poles to RPM

RPM

3600

1800

1200

Poles

Example:

If actual motor RPM is 3450.

•Set Motor Poles = 2

•Set Slip RPM = 150 RPM

HP 1/4 1/2 11.5 2 3 5710 15 20 25 30 40 50 60 75 100 125 150 200 225 250 300 350 400 500 600

kW 0.2 0.4 0.75 1.1 1.5 2.2 3.7 5.5 7.5 11.0 15.0 18.5 22.0 30.0 37.0 45.0 55.0 75 90 110 132 160 185 220 280 315 375 450

Andere Handbücher für H100

Inhaltsverzeichnis

Andere LSIS Gleichstromantrieb Handbücher

LSIS

LSIS S100 Series Bedienungsanleitung

LSIS

LSIS S100 Series Bedienungsanleitung

LSIS

LSIS G100 Benutzerhandbuch

LSIS

LSIS SV-iS7 series Bedienungsanleitung

LSIS

LSIS S100 Series Bedienungsanleitung

LSIS

LSIS Starvert iG5A Series Bedienungsanleitung

LSIS

LSIS iS7 Series Gebrauchs- und Pflegehandbuch

LSIS

LSIS SV008iC5-1F Bedienungsanleitung

LSIS

LSIS LSLV-H100 Bedienungsanleitung

LSIS

LSIS 004iC5-1 Bedienungsanleitung

LSIS

LSIS SV-iS7 series Bedienungsanleitung

Beliebte Gleichstromantrieb Handbücher anderer Marken

Vincent Associates

Vincent Associates UNIBLITZ ED12DSS Bedienungsanleitung

EKSMA OPTICS

EKSMA OPTICS DQ-100-4 Stücklistenhandbuch

Chamberlain Garog

Chamberlain Garog D Series Bedienungsanleitung

Parker

Parker PDS Series Bedienungsanleitung

Festo

Festo DGC G Series Einrichtungshandbuch

Binks

Binks QS-5012-1-CE Bedienungsanleitung

Danfoss

Danfoss VLT 2800 Series Technisches Datenblatt

ABB

ABB ACQ580-01 Series Installationshandbuch

YASKAWA

YASKAWA CANopen SI-S3 Bedienungsanleitung

GE D20A6 Bedienungsanleitung

Unex

Unex MC-D-250-1000-050W-TW Bedienungsanleitung

Geckodrive

Geckodrive G213V Bedienungsanleitung

ABB

ABB RSYC-01 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Betriebsanleitung

WEG

WEG DeviceNet CFW500 Bedienungsanleitung

Siemens

Siemens SINAMICS G Datenblatt

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Betriebsanleitung

SOMFY

SOMFY JR RU 30 Bedienungsanleitung