Ltech LT-8030 Bedienungsanleitung

LT-8030 DMX512 Decoder Manual Page 1 of 16

LT-8030

DMX512 DECODER

User’s Manual

(Kindly read through this manual carefully before use)

LT-8030 DMX512 Decoder Manual Page 2 of 16

Foreword

Thanks for choosing our LT-SYSTEM-8030 DMX512 Decoder. Before

installation and usage, we strongly recommend you to read through this

manual carefully.

After-sales service

From the day you purchase our products within a year, if being used properly in

accordance with the instruction, and quality problems occur, we provide free

repair or replacement services except the following cases:

1. Any defects caused by wrong operations..

2. Any damages caused by unauthorized removal, maintenance, modifying

circuit, incorrect connections and replacing chips.

3. Any damages due to transportation, vibration etc after the purchase.

4. Any damages caused by earthquake, fire, lightning strike, pollution and

abnormal voltage.

5. Any damages caused by negligence, inappropriate storing at high

temperature and humidity environment or near harmful chemicals.

6. Product has been updated.

Safety Warnings

1. Please don’t install this decoder in lightening, intense magnetic and

high-voltage fields.

2. To reduce the risk of component damage and fire caused by short circuit,

make sure correct connection

3. Always be sure to mount this unit in an area that will allow proper

ventilation to ensure a fitting temperature.

4. Check if the voltage and power adapter suit the decoder & if anode or

cathode definition is the same as the controller’s.

5. Don’t connect cables with power on, make sure a correct connection and

no short circuit checked with instrument before power on.

6. Please don’t repair without permission if problems occur.

For update information, kindly please consult with your supplier.

LT-8030 DMX512 Decoder Manual Page 3 of 16

Function Brief

Thanks for choosing LT-SYSTEM-8030 DMX512 Decoder, LT-SYSTEM-8030

Decoder is designed via advanced microchip technology to convert the

universal standard DMX512/1990 signal into analog signal, it allows user to

choose 1~3 output channel, 256-level brightness control, max 512 output

channels. This compact decoder connects to light console, analog device and

various Led terminal products such as RGB Led lamps, RGB Led tubes,

building lamps, LED wall washers or lighting and other compatible devices

allowing its user to create endless possibilities of light shows.

Ⅰ. Product Specifications:

1.) Input Power：DC5V--DC24V

2.) Output Current：6A per channel（total current: 18A）

3.) Output Power：90W（5V）220W(12V) 450W(24V)

4.) Brightness Control ：256 scales

5.) DMX Address：3 channels

6.) DMX512 Standard：DMX512/1990

7.) Product Dimension：125×52×40（mm）

8.) Casing Size：135×70×50（mm）

9.) Weight：0.3KG

Ⅱ. Basic Functions

1.) 256 scales of smooth brightness adjusting.

2.) User addressable DMX interface-with easy dip-switch settings

and testing modes.

3.) High power output, 3 output channels.

4.) Over load auto protection.

5.)DMX pass through and in/out connector for daisy chain

configurations.

Ⅲ. Configuration Diagram

LT-8030 DMX512 Decoder Manual Page 4 of 16

Input Port

Output Port

Ⅳ. Decoder address setting

This decoder occupies 3 addresses, adopted Dip switch to set the

address, the Dip switches from 1 to 9 are a kind of binary value

coding switches used to set DMX512 initial address code, the

correlative bits is the 1-9 bits of the DIP switch, the 1st bit is LSC,

the 9th bit MSC , 512 addresses totally.

DMX512 initial address code is equal to the total amount of the Dip

switches’ number from 1 to 9, press Dip switch downward (ON: at

position “1”), user can get the number of its position, if pressing

upward (at position “0”), the number of its position is 0.

LT-8030 DMX512 Decoder Manual Page 5 of 16

Example 1: Set to 37

Set the 6th, 3rd, 1st bit of the DIP switch downward to “1”, others

to “0”(picture 1), the total sum from 1 to 9 is 32+4+1, so the

DMX512 initial address code is 37.

Accept DMX512 signal only when the DIP switch FUN＝OFF

(at position “0”)

Picture 1

Example 2:

Set DMX512 original address code as 328: Set the 9th, 7th, 4tht bit of

the DIP switch downward to “1”, the rest to “0”(as picture 2),

the total sum from 1 to 9 is 256+64+8, so the DMX512 original

address code is 328.

Picture 2

LT-8030 DMX512 Decoder Manual Page 6 of 16

Ⅴ.Instructions for other functions

1. Testing function：

The 10th DIP switch is FUN, acting as the function key.

DMX512 Decoder works when FUN is at OFF, receiving DMX512

signals.

Decoder testing mode works when FUN is at position” ON” as

Picture 3:

SWITCH1－9 OFF：BLACK

SWITCH1 IS ON：RED

SWITCH2 IS ON: GREEN

SWITCH3 IS ON: BLUE

SWITCH4 IS ON: YELLOW

SWITCH5 IS ON: PURPLE

SWITCH6 IS ON: CYAN

SWITCH7 IS ON: WHITE

SWITCH8 IS ON: 7 CLOLOR JUMPING (8 SPEED LEVELS)

SWITCH9 IS ON: 7 COLOR SMOOTH (8 SPEED LEVELS)

Picture 3

2. Color jumping & color smooth

When decoder is at testing mode, DIP Switch 8 is at “ON”, it’s

the 7 Color Jumping, when DIP Switch 9 is at “ON”, it’s the 7

Color Smooth, with 8 speed levels for each effect.

SWITCH 1－7 OFF：SPEED 0

LT-8030 DMX512 Decoder Manual Page 7 of 16

SWITCH 1＝ON：SPEED 1

SWITCH 2＝ON：SPEED 2

SEITCH 3＝ON：SPEED 3

SWITCH 4＝ON：SPEED 4

SWITCH 5＝ON：SPEED 5

SWITCH 6＝ON：SPEED 6

SEITICH7＝ON：SPEED 7

Picture 4

As Picture 4. When several DIP SWITCH at “ON” at the same time,

comply with the largest value switch, the testing function is when

FUN＝ON, DIP SWITCH 8 & 9 for the color changing function, DIP

SWITCH1－7 for the speed function, comply with the largest value

switch , SPEED 7 is the fastest speed.

3. Manual control mode:

In this mode, the dip- switch 10 is flipped to the “OFF” position. Flip the dip-switch

1-3 to set the intensity of Red LEDs, dip-switch 4-6 to set the intensity of Green

LEDs and dip-switch 7-9 to set the intensity of Blue LEDs. Please refer to the

following table for further information.

LT-8030 DMX512 Decoder Manual Page 8 of 16

4. Note：Two versions for LT-8030 decoder, one has 3 dmx addresses, the other

has 4 dmx addresses.

3 DMX ADD Version:

The 1st address controls LEDs on CH1,0-255 steps of brightness.

The 2nd address controls LEDs on CH2,0-255 steps of brightness.

The 3rd address controls LEDs on CH3,0-255 steps of brightness.

4 DMX ADD Version:

The 1st address controls LEDs on CH1,0-255 steps of brightness.

The 2nd address controls LEDs on CH2,0-255 steps of brightness.

The 3rd address controls LEDs on CH3,0-255 steps of brightness.

0-127 of the 4th address controls the brightness, 128-255 for strobe

Dip-Switch Setting

Intensity Red(SW1-3) Green(SW4-6) Blue(SW7-9)

0 000 000 000

14% 100 100 100

28% 010 010 010

43% 110 110 110

57% 001 001 001

71% 101 101 101

86% 011 011 011

LT-8030 DMX512 Decoder Manual Page 9 of 16

100% 111 111 111

Ⅵ. Conjunction Diagram

Each Decoder with one power supply

Or one power supply with multi decoders

LT-8030 DMX512 Decoder Manual Page 10 of 16

DMX Address Setting Table

DIP SWITCH DMX ADDR DIP SWITCH DMX ADDR DIP SWITCH DMX ADDR

123456789 NUMBER 123456789 NUMBER 123456789 NUMBER

100000000 001 001110000 028 111011000 055

010000000 002 101110000 029 000111000 056

110000000 003 011110000 030 100111000 057

001000000 004 111110000 031 010111000 058

101000000 005 000001000 032 110111000 059

011000000 006 100001000 033 001111000 060

111000000 007 010001000 034 101111000 061

000100000 008 110001000 035 011111000 062

100100000 009 001001000 036 111111000 063

010100000 010 101001000 037 000000100 064

110100000 011 011001000 038 100000100 065

001100000 012 111001000 039 010000100 066

101100000 013 000101000 040 110000100 067

011100000 014 100101000 041 001000100 068

111100000 015 010101000 042 101000100 069

000010000 016 110101000 043 011000100 070

100010000 017 001101000 044 111000100 071

010010000 018 101101000 045 000100100 072

110010000 019 011101000 046 100100100 073

001010000 020 111101000 047 010100100 074

101010000 021 000011000 048 110100100 075

011010000 022 100011000 049 001100100 076

111010000 023 010011000 050 101100100 077

000110000 024 110011000 051 011100100 078

100110000 025 001011000 052 111100100 079

010110000 026 101011000 053 000010100 080

110110000 027 011011000 054 100010100 081

Andere Handbücher für LT-8030

Inhaltsverzeichnis

Andere Ltech Medienkonverter Handbücher

Ltech

Ltech 2272700 Bedienungsanleitung

Ltech

Ltech LT-858-5A Bedienungsanleitung

Ltech

Ltech LT-904-DIP Bedienungsanleitung

Ltech

Ltech LT- 830 Bedienungsanleitung

Ltech

Ltech LT-DMX-1809 Bedienungsanleitung

Ltech

Ltech LT-DMX-8806 Bedienungsanleitung

Ltech

Ltech DIN-DMX-5A Bedienungsanleitung

Ltech

Ltech DMX-8806 Bedienungsanleitung

Ltech

Ltech LT-905 Bedienerhandbuch

Ltech

Ltech Artnet-DMX-1 Bedienungsanleitung

Ltech

Ltech LT-995 Bedienungsanleitung

Ltech

Ltech LT-995-OLED Bedienungsanleitung

Ltech

Ltech WP-804 Bedienungsanleitung

Ltech

Ltech LT-855-12A Bedienungsanleitung

Ltech

Ltech Artnet-SPI-8 Bedienungsanleitung

Ltech

Ltech LT-830 Bedienungsanleitung

Ltech

Ltech LT-858-CC Bedienungsanleitung

Ltech

Ltech LT-905 Bedienungsanleitung

Ltech

Ltech LT-855-12A Bedienungsanleitung

Ltech

Ltech LT-DMX-1809 Bedienungsanleitung

Ltech

Ltech LT-811-10A Bedienungsanleitung

Ltech

Ltech LT-874-5A Bedienungsanleitung

Ltech

Ltech ArtNet-SPI-1 Bedienungsanleitung

Ltech

Ltech LT-851-6A Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung