1
www.ltech-led.com
Photoelectric
isolation
Dimming Curve: 0.1~9.9
Short circuit / Over current / Overheat protection
OLED display
8 bit / 16 bit
4 kinds of DMX interfaces
LT-932-OLED
www.ltech-led.com
Product introduction
6. With firmware upgrade function.
8. With power-on state management and fast self-testing function.
5. With the operations can be completed via the
RDM master console, such as parameters browsing & settings, DMX address
settings, equipment recognition, etc.
RDM remote management protocol,
4. 3-pin XLR, 5-pin XLR, RJ45 and green terminal DMX interface with photoelectric
isolation, improve signal transmission efficiency and anti-interference ability, the
green terminal also has signal amplifier function.
2. Easy operation with OLED screen and touch buttons.
1. Designed for Hi-power multiple channels application, 32 channels output, and Max.
3A current per channel, up to 2304W output power.
3. 4 kinds of control modes available: DIM, CT, RGB, RGBW.
7.
when a fault occurs.
With short circuit, over current and overheat protection, as well as warning function
10. Available in standard, linear, LOG or custom 0.1-9.9 dimming curve.
9. 16bit (65536 levels) / 8bit (256 levels) grey level available.
Gamma Value
DMX Value
Output
Brightness
0
100%
2.5 3.5
6.5
1.0
0.8
0.9
<1
>1
1.5
255
Photoelectric
isolation
Short circuit
protection
5-pin XLR
3-pin XLR RJ45 RDM Over current
protection
Display
Overheat
protection
E5 00 58 5
2 3
138
300
138
39
122
110
www.ltech-led.com www.ltech-led.com
Technical specs
LT-932-OLED
DMX512/RDM
12~24Vdc
3A × 32CH Max. 96A
(0~36W...72W) × 32CH Max. 2304W
3-pin XLR, 5-pin XLR, RJ45, Green terminal
DIM/CT/RGB/RGBW
0.1~9.9, standard, linear, LOG
8bit (256 levels) / 16bit (65536 levels)
Yes
Short circuit / Overheat / Over current protection,
recover automatically.
-30°C~65°C
300×122×39mm(L×W×H)
313×127×41mm(L×W×H)
1180g
Model :
Input signal :
Input voltage :
Current load :
Output power :
DMX interfaces :
Control modes :
Dimming curves :
Grey level :
Photoelectric isolation :
Protection:
Working temperature :
Dimensions :
Package size :
Weight (G.W.) :
Product size
Unit: mm
Main component description
Power
indicator
Signal
indicator OLED screen
Green terminals
LED lamp connection
DMX/RDM input & output
3-pin XLR 5-pin XLR RJ45 Green terminals
(with signal amplifier function)
12-24V dc
Power input
Powered by DC1
Max. 24A
Powered by DC2
Max. 24A
Powered by DC3
Max. 24A
Powered by DC4
Max. 24A
DC2DC1 DC3 DC4
5-Year
Warranty
E5 0 0 5 85
4 5
DMX: Hz: High
Mode: RGBW 8bit
Curve: Standard
Dim: Smo TOOL&v
001
DMX: 001 Hz:
Mode: RGBW 8bit
Curve: Standard
Dim: Smo TOOL&v
High
DMX: 001 Hz: High
Mode: 8bit
Curve: Standard
Dim: Smo TOOL&v
RGBW
DMX: 001 Hz: High
Mode: RGBW
Curve: Standard
Dim: Smo TOOL&v
8bit
DMX: 001 Hz: High
Mode: RGBW 8bit
Curve:
Dim: Smo TOOL&v
Standard
DMX: 001 Hz: High
Mode: RGBW 8bit
Curve: Standard
TOOL&v Dim: Smo
M
<
<
Screen: ON+Addr
Contrast: 40%
Beep: ON
EXIT&v
TEST&v
001
DMX: 001 Hz: High
Mode: RGBW 8bit
Curve: Standard
Dim: Smo TOOL&v
DMX: 001 Hz: High
Mode: RGBW 8bit
Curve: Standard
Dim: Smo TOOL&v
[∧&V]
EXIT &V
ALL: 255
CH01: 255
CH02: 255
CH03: 255 [∧&V]
CH04: 255 EXIT &V
www.ltech-led.com www.ltech-led.com
OLED screen interface
Press "M" key, switch entries.
Long press “M” key, back to main page.
Press "∧" or “∨" key, parameter adjustment.
Exit: back to previous page.
1. DMX address settings Press “∧" or “∨" key to set DMX address.
Range: 001~512
Main page
2. PWM frequency
Press “∧" or “∨" key to choose.
Option : DIM / CT / CT2 / RGB / RGBW
3. Modes
No flicker in
video camera.
Press “∧" or “∨" key to choose.
Std (standard)
High
Mid (middle)
Low
Option :
It is recommended to
use standard.
4. Grey scale
5. Dimming
curves
Press “∧" or “∨" key to choose.
Option : 8bit
16bit (choose it if the master
controller supports this function)
Press “∧" or “∨" key to choose.
Option :
Linear
LOG
0.1~9.9
Standard
It is recommended to use standard,
0.1-9.9 is for special requirements.
Press “∧" or “∨" key to choose.
Option :
Smo (smooth)
Std (standard)
Smo: This option with smooth processing, realizes
flicker-free dimming and smooth dynamic effects.
It is recommended to use standard.
6. Enhance
Dimming
7. Tool
Fast self-testing function: press “ or " keys
simultaneously for 2-3 seconds under any page,
decoder will enter self-testing function.
∧"∨"
Press “∧" or “∨"
key to enter submenu
Press “∧" or “∨"
key to enter
submenu of test.
Change all value
simultaneously
(on the last page)
Screensaver open and
black if undo for 2 minutes.
Screen: ON+black
Screensaver not enable.
Screen: OFF
Screensaver open and display
address if undo for 2 minutes.
Screen: ON+Addr
Brightness settings
(range: 0~255)
Press”∧" or "∨"
to next page
Press"∨" to exit
Smooth and exquisite,
human eye is comfortable.
*
