Ltl Acorn Ltl 5210 Bedienungsanleitung

CHRIS-CAM

Jagd Kamera

12MP

Bedienungsanleitung

Inhalt

Allgemeine Info .............................................................2

1.1 Einfuehrung.............................................................2

1.2 Anwendung..............................................................3

1.3 Illustration................................................................3

Schnell Start...........................................................................5

2.1 Batterie laden ..........................................................5

2.2 Einfuehren SD-Card ................................................6

2.3 Eimschalten Test Mode .......................................7

- 1 -

2.4 Live Mode ......................................................9

Einstellung Fortgeschrittenefuer .............................11

3.1 Parameter

Einstellung .........................................11

3.2 File Format .....................................................15

Garantie Information..........................................................16

Anhang I Technische Spezifikation.....................................17

Anhang II Lieferumpfang ...................................................20

Anhang III Installationsanweisung zus. Batteriebox .......21

GENERAL INFORMATION

1.1 Introduction

The Ltl Acorn (Model: Ltl-5210 & Ltl-5210A) scouting camera

(also called game camera/trail camera) is a scouting device. It can

be triggered by sudden change of ambient temperature caused by

moving game in a region of interest (ROI), which is detected by a

highly sensitive Passive Infra-Red (PIR) sensor, and then take

- 2 -

pictures or video clips automatically.

The Ltl-5210 and Ltl-5210A feature:

•5 Mega Pixels CMOS sensor. Interpolable to 12 Mega

Pixels on Ltl-5210A

•Sharp and bright color pictures in daytime and clear

black/white pictures at night

•Ultra low standby power consumption. Extremely long

in-field life (in standby mode, up to 3 months with 4 x

AA batteries and 6 months with 8 x AA batteries)

•Unique side Prep Sensor design provides wider sensing

angle and enhances camera’s response speed

•Perform in the most extreme temperatures from -22°F to

158°F

•Compact size (5 ½ x 3 ½ x 2 ½ inches). Well designed

to deploy covertly

•Impressively quick trigger time (1 second)

•Backpack-looking tree grabber makes mounting and

aiming a snap

•Serial Number function enables you to code locations in

the photos. This helps multi-camera users identify the

location when reviewing the photos

•Date, time, temperature and moon phase can be stamped

in the pictures

•Lockable and password protected

1.2 Application

- 3 -

•Trail camera for hunting

•Animal or event observation

•Motion-triggered security camera, for home, office and

community

•All other indoor/outdoor surveillance where invasion

evidence needed

1.3 Illustration

•Figure 1.1 shows the front view of the camera

•Figure 1.2 shows the bottom view of the camera

•Figure 1.3 shows the back view of the camera

Figure 1.1: Front View

Figure 1.2: Bottom View

The camera provides the following connections for external

devices: USB port, SD card slot, TV out jack, and external DC

power in jack. The 3-way Power/Mode Switch is used to select the

main operation modes: OFF, ON and TEST.

To supply power, it is recommended to use four new

high-performance alkaline AA batteries or low self-discharge

Ni-MH chargeable AA batteries. To achieve longer in-field time,

- 4 -

install the additional battery box which contains four more AA

batteries.

Figure 1.3: Back View

Schnell START

2.1 Batterien einlegen

Laden Instruktionen.denfolgenundeinBatteriendieSie

•

Schliessen PolaritaetaufachtenundeinBatterienAA4Sie .Legen

•BatteriefachdasSie .

Alternataiv

versorgt.Quelleexternediedurch

Kamera diewirddannSpannungsquelleexterneundBatterien

interne alsoist,installiertbeidesWennanschließen.

Spannungsquelle 6-VoltexterneeineanKameradieSiekoennen

2.2 Einlegen der SD Card

SieSpeicherinternenkeinenhatKamera .Die nichtalsowird

ohne SD (Secure Digital) Card or SDHC (High Capacity) Card

arbeiten Bevor Sie die SD card einlegen,

existiert.Schreibschutzkein

dass sich,Sievergewissern

Die bisKartenunterstuetztKamera 16GB.

Pruefen

funktioniert. KarteeingelegtedieobvorherFalljedenaufSie

Figure

2.1

Achtung:

wechselnoder

einlegen BatterienSiebevorausschalten,erst

Kamera

2.3 Einschalten Test Mode

Schalter in TEST Position

In diesem machenVideosoderBilderregulareSiekoennenModus

(Handbetrieb)

Figure 2.2

•Video-Modedes .Einschalten

•Einschalten Einzelbild-Modedes

•

SHOT Taste Aufnahmenmanuellefuer .

- 6 -

Ein

Wenn erscheintDisplayim gespeichert.Speicherkartederauf

und Einstellung)nach(jegemachtwirdFotooderVideo

“CARD PROTECTED”

wenn denSie SHOT key , schaltendruecken

und einschalten.Kamera einlegenwiederSD-CardDanachauf.

Schreibschutz denhebenundSD-Carddieentfernenaus,

Kamera dieSie

•

Druecken TastendieSie

REPLAY Knopf,

gemachtesichum

photos/videos auf dem LCD Bildschirm

,SieBenutzen

anzuschauen. TVamoder

oder zum navigieren

Der aufKnopf MENU, dientBedienfelddemwuenschen.Siedie

Kameraparameter, derEinstellungzur

Please make reference to 3.1 Parameter Settings in the

Advanced Operation section.

Under the test mode, one useful function you would like is testing

the work area of the PIR (Passive Infrared) sensor, specifically the

sensing angle and monitoring distance. To perform the test:

•First strap the camera on a tree aiming the region of

interest (ROI).

•Walk slowly from one side of the ROI to the other

parallel to the camera. Try different distances and angles

from the camera.

•If the Motion Indicator flashes blue, it indicates the

position from where you were detected by one of the

side Prep PIR sensors. If the Motion Indicator flashes

red, it indicates the position from where you were

captured by the main PIR sensor.

- 7 -

By doing this test, you can find the best placement when mounting

and aiming the Ltl Acorn camera. In general, you are

recommended to place the camera 3 to 6 feet (1 to 2 meters) above

the ground.

To avoid potential false triggers due to temperature and motion

disturbances, please do not aim the camera at a heat source (i.e.

the sun) or nearby tree branches and limbs. The ideal direction to

aim at is North or South. Also, remove any limbs close to the front

of the camera.

2.4 Enter Live Mode

Switch to the ON position to enter the live mode. The Motion

Indicator will flash red for about 10 seconds and the camera starts

working by itself without any manual handling. It will at once

shoot pictures or record videos when game or other objects enter

the PIR area of the main sensor directly. If the game enters the

PIR area of the prep sensors from the side, the prep sensors detect

the movement and activate the camera. While the game keeps

moving into the PIR area of the main sensor, the camera takes

photos/videos immediately. If the game roams away after entering

the PIR area of the prep sensors, the camera will power off and

enter standby mode.

ADVANTAGES OF PREP SENSORS

In general, to save battery power, an Infer-Red camera is in

- 8 -

“sleep” mode, with only the PIR sensor working. When game is

detected by the PIR sensor, the camera is powered on and starts

shooting pictures. The time period from being activated to starting

firing is called trigger time. The trigger time varies among

different scouting camera brands in the market, generally from 1

to 5 plus seconds. Our Ltl Acorn scouting camera has an

impressive 1 second trigger time. However, when game passes

across very quickly, the picture may only capture the rear part of

the body, and possibly nothing at all.

With the unique side prep PIR sensors design, our Ltl Acorn

solves this issue. The combination of the two side prep sensors

and the main sensor comes up with a 100 to 120° angle of

induction, a very wide scope far outweighing the 50 ° angle of the

camera lens. When game first crosses the PIR area of the prep

sensor, the camera is activated and ready to shoot after 1 second.

If the game continually enters into the PIR area of the main sensor,

the camera takes pictures immediately, therefore catching the

whole body of the game. This split-second process could be as

short as 0.2 second.

In the case the game browses only in the PIR area of the prep

sensors, to avoid the camera being powered on constantly, the

system is designed to work in the following way: If the game does

not enter the PIR area of the main sensor and therefore not trigger

the main sensor, the camera will power off after 3 seconds. If the

trigger events consecutively happened twice only in the PIR area

of the prep sensors, the camera will not be activated by the side

- 9 -

prep sensors, but only by the main sensor. So later on when the

game enters the PIR area of the main sensor eventually, since it is

not in fast movement, the picture will by all means capture the

whole body of the game based on our standard 1 second response

time.

FORTGESCHRITTENE EINSTELLUNGEN

The Ltl Acorn trail camera comes with preset manufacturer

settings. You can change the settings to meet your requirements.

Please make sure the camera is in the test mode.

3.1 Parameter Settings

Druecke “MENU” Knopf zum MenuesdesauschaltenEin-und .

,zum zumCursers,desBewegen

Wechseln um

verloren.

wieder EinstellungenIhregehenAndernfallssichern.zu

Einstellung Ihrebetaetigen,Denken zu"save"OptiondiedaranimmerSie Bestaetigung.derenundMenuepunkteder

Parameter Einstellung

(Bold =

Voreinst.)

Beschreibung

Druecken

Mode Camera,

Video, Waehlen VideooderFotoSie

Andere Handbücher für Ltl 5210

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Ltl Acorn Scouting-Kamera Handbücher

Ltl Acorn

Ltl Acorn Ltl-5210M Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-5310 Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl 5210A Bedienungsanleitung

Ltl Acorn

Ltl Acorn L1l-5210M Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-5310 Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-5210M Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-5610 Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn AG-680M Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-3310 Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-6210MC Bedienungsanleitung

Ltl Acorn

Ltl Acorn AG-680V Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl 5210A Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl 5210A Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-5210M Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn 5310A Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-6210M HD Video Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-6210MC Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-6310-3G Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-5210M Series Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-6310M Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-6511-4G Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-5511 MG Bedienungsanleitung

Ltl Acorn

Ltl Acorn Ltl-5510 MC Bedienungsanleitung

Ltl Acorn

Ltl Acorn 5610A Bedienungsanleitung

Beliebte Scouting-Kamera Handbücher anderer Marken

Nestbox

Nestbox C13 Bedienungsanleitung

Wildview

Wildview STC-TGL1 Bedienungsanleitung

Stealth Cam

Stealth Cam CORE STC-Z3IRTL Bedienungsanleitung

Suntek

Suntek HC-800M Bedienungsanleitung

Spypoint

Spypoint G4 Bedienungsanleitung

Duramaxx

Duramaxx 10029765 Bedienungsanleitung

Brecom

Brecom C2400 Bedienungsanleitung

BlazeVideo

BlazeVideo A280W Bedienungsanleitung

Bestok

Bestok 5210GM Bedienungsanleitung

GardePro

GardePro X60P Bedienungsanleitung

Delta-Opti

Delta-Opti HC-SG880MK-18MHD Bedienungsanleitung

PNI

PNI HUNTING 280C Bedienungsanleitung

Muddy

Muddy Pro-Cam 14 Bedienungsanleitung

Bresser

Bresser 3310006 Bedienungsanleitung

Recon Outdoors

Recon Outdoors HS410 Bedienungsanleitung

Braun

Braun 57660 Bedienungsanleitung

Wildgame

Wildgame Shadow Bedienungsanleitung

Spypoint

Spypoint FLEX Bedienungsanleitung