Lucent Technologies Stinger STGR-LIM-48 Bedienungsanleitung

Stinger®

SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide

For software version 9.3-170

June 2002

Lucent Technologies

This material is protected by the copyright laws of the United States and other countries. It may not be reproduced, distributed, or altered in

any fashion by any entity (either internal or external to Lucent Technologies), except in accordance with applicable agreements, contracts, or

licensing, without the express written consent of Lucent Technologies. For permission to reproduce or distribute, please email your request to

techcomm@lucent.com.

Notice

Every effort was made to ensure that the information in this document was complete and accurate at the time of printing, but information is

subject to change.

European Community (EC) RTTE compliance

Hereby, Lucent Technologies, declares that the equipment documented in this publication is in compliance with the essential require-

ments and other relevant provisions of the Radio and Telecommunications Technical Equipment (RTTE) Directive 1999/5/EC.

To view the official Declaration of Conformity certificate for this equipment, according to EN 45014, access the Lucent INS online documentation

library at http://www.lucentdocs.com/ins.

Safety, compliance, and warranty information

Before handling any Lucent Access Networks hardware product, read the Edge Access and Broadband Access Safety and Compliance Guide included

in your product package. See that guide also to determine how products comply with the electromagnetic interference (EMI) and network

compatibility requirements of your country. See the warranty card included in your product package for the limited warranty that Lucent

Technologies provides for its products.

Security statement

In rare instances, unauthorized individuals make connections to the telecommunications network through the use of access features.

Trademarks

Lucent, the Lucent logo, and all Lucent brand and product names are trademarks or registered trademarks of Lucent Technologies Inc. Other

brand and product names are trademarks of their respective holders.

Ordering information

You can order the most up-to-date product information and computer-based training online at http://www.lucentdocs.com/bookstore.

Feedback

Lucent Technologies appreciates customer comments about this manual. Please send them to [email protected].

Customer Service

Stinger® SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide iii

Customer Service

Product and service information, and software upgrades, are available 24 hours a day.

Technical assistance options accommodate varying levels of urgency.

Finding information and software

To obtain software upgrades, release notes, and addenda for this product, log in to

Lucent OnLine Customer Support at http://www.lucent.com/support.

Lucent OnLine Customer Support also provides technical information, product

information, and descriptions of available services. The center is open 24 hours a day,

seven days a week. Log in and select a service.

Obtaining technical assistance

Lucent OnLine Customer Support at http://www.lucent.com/support provides easy

access to technical support. You can obtain technical assistance through email or the

Internet, or by telephone. If you need assistance, make sure that you have the

following information available:

■Active service or maintenance contract number, entitlement ID, or site ID

■Product name, model, and serial number

■Software version or release number

■Software and hardware options

■If supplied by your carrier, service profile identifiers (SPIDs) associated with your

line

■Your local telephone company’s switch type and operating mode, such as AT&T

5ESS Custom or Northern Telecom National ISDN-1

■Whether you are routing or bridging with your Lucent product

■Type of computer you are using

■Description of the problem

Obtaining assistance through email or the Internet

If your services agreement allows, you can communicate directly with a technical

engineer through Email Technical Support or Live Chat. Select one of these sites

when you log in to http://www.lucent.com/support.

Calling the technical assistance center (TAC)

If you cannot find an answer through the tools and information of Lucent OnLine

Customer Support or if you have a very urgent need, contact TAC. Access Lucent

OnLine Customer Support at http://www.lucent.com/support and click Contact Us

for a list of telephone numbers inside and outside the United States.

Alternatively, call 1-866-LUCENT8 (1-866-582-3688) from any location in North

America for a menu of Lucent services. Or call +1 510-769-6001 for an operator. If

you do not have an active services agreement or contract, you will be charged for

time and materials.

Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide v

Contents

Customer Service ........................................................................................................iii

About This Guide ................................................................................xi

What is in this guide ...................................................................................................xi

What you should know...............................................................................................xi

Documentation conventions.......................................................................................xi

Stinger documentation set .........................................................................................xii

Chapter 1 Configuring the SHDSL LIM..............................................................1-1

Introducing the SHDSL LIMs ................................................................................... 1-1

Installing the single-pair high-speed DSL (SHDSL) LIM ......................................... 1-2

Module specifications...............................................................................................1-2

Status indicators....................................................................................................... 1-3

Interpreting SHDSL LIM status lights................................................................1-4

Embedded Operations Channel (EOC) protocol compliance ............................1-5

Configuring SHDSL interfaces..................................................................................1-5

Configuring port settings for SHDSL..................................................................1-5

Sample SHDSL mode configuration ................................................................1-12

Binding two SHDSL ports................................................................................1-13

Displaying SHDSL port status .......................................................................... 1-13

Configuring call control..........................................................................................1-14

Checking the status of an SHDSL interface............................................................ 1-16

Checking the status of the physical interface .................................................. 1-17

Obtaining statistics about operations............................................................... 1-18

Diagnostic internal, external, and bit error-rate tests ............................................ 1-20

Configuring an internal diagnostic test (IDT)..................................................1-22

Configuring a bit-error-rate test (BERT).......................................................... 1-22

Configuring an external diagnostic test (EDT) ................................................ 1-23

Digital loopback......................................................................................... 1-23

Analog loopback........................................................................................ 1-24

Chapter 2 Configuring LIM and LIM Port Redundancy....................................2-1

Overview of LIM and LIM port redundancy............................................................2-1

Configuring LIM redundancy................................................................................... 2-1

Overview of the lim-sparing-config profile .......................................................2-2

Manual LIM redundancy...................................................................................2-4

Automatic LIM redundancy ..............................................................................2-4

LIM redundancy with IRMs and LPM-Rs..........................................................2-6

Checking LIM redundancy status...................................................................... 2-8

vi Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide

Contents

Checking status with the Rearslot command .................................................... 2-9

Configuring LIM port redundancy..................................................................... 2-9

Enabling LIM port redundancy........................................................................2-11

Manual LIM port redundancy ......................................................................... 2-11

Automatic LIM port redundancy.....................................................................2-12

Checking the status of extended LIM port redundancy .................................. 2-12

Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide vii

Figures

Figure 1-3 SHDSL 72-port LIM .............................................................................. 1-4

Figure 1-5 Digital loopback .................................................................................. 1-23

Figure 1-6 Analog loopback ................................................................................. 1-24

Figure 2-1 LIM redundancy in a Stinger FS unit ................................................... 2-2

Figure 2-2 LIM port redundancy on a Stinger FS unit......................................... 2-10

Stinger®SHDSL 48-Port and 72-Port Line Interface Modules (LIM) Guide ix

Tables

Table 1-1 SHDSL LIMS........................................................................................ 1-1

Table 1-2 Specifications for the SHDSL 48-port and 72-port LIMs..................... 1-2

Table 1-4 SHDSL LIM status lights...................................................................... 1-4

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lucent Technologies Steuereinheit Handbücher

Lucent Technologies

Lucent Technologies PacketStar PSAX 1000 Bedienungsanleitung

Lucent Technologies

Lucent Technologies Stinger STGR-LIM-AP-72 Bedienungsanleitung

Lucent Technologies

Lucent Technologies CIB 3102 Bedienungsanleitung

Lucent Technologies

Lucent Technologies Stinger Bedienungsanleitung

Lucent Technologies

Lucent Technologies LINEAGE 2000 FPS Bedienungsanleitung

Lucent Technologies

Lucent Technologies Stinger IP2000 Bedienungsanleitung

Lucent Technologies

Lucent Technologies Stinger OC12-ATM Bedienungsanleitung

Lucent Technologies

Lucent Technologies LE-180XT Bedienungsanleitung

Lucent Technologies

Lucent Technologies Merlin Magix Kurzanleitung

Lucent Technologies

Lucent Technologies PacketStar PSAX DS1/E1/DS0A CES Module Bedienungsanleitung

Lucent Technologies

Lucent Technologies LINEAGE 2000 CP5 Bedienungsanleitung

Lucent Technologies

Lucent Technologies Stinger STGR-LIM-AC-48 Bedienungsanleitung

Lucent Technologies

Lucent Technologies PacketStar PSAX Bedienungsanleitung

Lucent Technologies

Lucent Technologies Stinger OC3-ATM Bedienungsanleitung

Lucent Technologies

Lucent Technologies PacketStar 20N32 Bedienungsanleitung

Lucent Technologies

Lucent Technologies PacketStar PSAX 8-Port Voice 2-Wire Station... Bedienungsanleitung

Lucent Technologies

Lucent Technologies PacketStar PSAX 1250 Bedienungsanleitung

Lucent Technologies

Lucent Technologies Stinger STGR-LIM-AD-48 Bedienungsanleitung

Lucent Technologies

Lucent Technologies PacketStar PSAX 45N74 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung