Lucent Technologies Stinger Bedienungsanleitung

Stinger®

ADSL 72-Port Annex A Line Interface Module (LIM) Guide

For software version 9.4-185.3

June 2003

Lucent Technologies

This material is protected by the copyright laws of the United States and other countries. It may not be reproduced, distributed, or altered in

any fashion by any entity (either internal or external to Lucent Technologies), except in accordance with applicable agreements, contracts, or

licensing, without the express written consent of Lucent Technologies. For permission to reproduce or distribute, please email your request to

techcomm@lucent.com.

Notice

Every effort was made to ensure that the information in this document was complete and accurate at the time of printing, but information is

subject to change. For latest information, refer to online product documentation at www.lucent.com/support.

European Community (EC) RTTE compliance

Hereby, Lucent Technologies, declares that the equipment documented in this publication is in compliance with the essential require-

ments and other relevant provisions of the Radio and Telecommunications Technical Equipment (RTTE) Directive 1999/5/EC.

To view the official Declaration of Conformity certificate for this equipment, according to EN 45014, access the Lucent INS online documentation

library at http://www.lucentdocs.com/ins.

Safety, compliance, and warranty Information

Before handling any Lucent Access Networks hardware product, read the Edge Access and Broadband Access Safety and Compliance Guide included

in your product package. See that guide also to determine how products comply with the electromagnetic interference (EMI) and network

compatibility requirements of your country. See the warranty card included in your product package for the limited warranty that Lucent

Technologies provides for its products.

Security statement

In rare instances, unauthorized individuals make connections to the telecommunications network through the use of access features.

Trademarks

Lucent, the Lucent logo, and all Lucent brand and product names are trademarks or registered trademarks of Lucent Technologies Inc. Other

brand and product names are trademarks of their respective holders.

Ordering Information

You can order the most up-to-date product information and computer-based training online at http://www.lucentdocs.com/bookstore.

Feedback

Lucent Technologies appreciates customer comments about this manual. Please send them to techcomm@lucent.com.

Customer Service

Stinger® ADSL 72-Port Annex A Line Interface Module (LIM) Guide iii

Customer Service

Product and service information, and software upgrades, are available 24 hours a day.

Technical assistance options accommodate varying levels of urgency.

Finding information and software

To obtain software upgrades, release notes, and addenda for this product, log in to

Lucent OnLine Customer Support at http://www.lucent.com/support.

Lucent OnLine Customer Support also provides technical information, product

information, and descriptions of available services. The center is open 24 hours a day,

seven days a week. Log in and select a service.

Obtaining technical assistance

Lucent OnLine Customer Support at http://www.lucent.com/support provides easy

access to technical support. You can obtain technical assistance through email or the

Internet, or by telephone. If you need assistance, make sure that you have the

following information available:

■Active service or maintenance contract number, entitlement ID, or site ID

■Product name, model, and serial number

■Software version or release number

■Software and hardware options

■If supplied by your carrier, service profile identifiers (SPIDs) associated with your

line

■Your local telephone company’s switch type and operating mode, such as AT&T

5ESS Custom or Northern Telecom National ISDN-1

■Whether you are routing or bridging with your Lucent product

■Type of computer you are using

■Description of the problem

Obtaining assistance through email or the Internet

If your services agreement allows, you can communicate directly with a technical

engineer through Email Technical Support or a Live Chat. Select one of these sites

when you log in to http://www.lucent.com/support.

Calling the technical assistance center (TAC)

If you cannot find an answer through the tools and information of Lucent OnLine

Customer Support or if you have a very urgent need, contact TAC. Access Lucent

OnLine Customer Support at http://www.lucent.com/support and click Contact Us

for a list of telephone numbers inside and outside the United States.

Alternatively, call 1-866-LUCENT8 (1-866-582-3688) from any location in North

America for a menu of Lucent services. Or call +1 510-747-2000 for an operator. If

you do not have an active services agreement or contract, you will be charged for

time and materials.

Stinger®ADSL 72-Port Annex A Line Interface Module (LIM) Guide v

Contents

Customer Service ........................................................................................................iii

About This Guide ................................................................................xi

What is in this guide ...................................................................................................xi

What you should know...............................................................................................xi

Documentation conventions.......................................................................................xi

Stinger documentation set .........................................................................................xii

Chapter 1 Configuring an ADSL 72-Port Line Interface Module (LIM) ...........1-1

Installing an ADSL 72-port Annex A LIM ..............................................................1-1

Module specifications...............................................................................................1-2

Interpreting ADSL 72-port Annex A status lights....................................................1-2

Configuring ATM ADSL-DMT interfaces ................................................................. 1-4

Overview of the al-dmt profile..........................................................................1-4

ADSL protocol support ......................................................................................1-5

Line activation and DMT parameters ................................................................1-5

The Al-Dmt profile......................................................................................1-5

line-config subprofile ..................................................................................1-6

Rate-adaptive mode parameters..................................................................1-8

Power-level parameters and power spectral density (PSD) ........................1-9

Fast and interleaved bit-rate parameters.........................................................1-10

The fast-path-config subprofile .................................................................1-11

The interleave-path-config subprofile.......................................................1-11

margin-config subprofile...........................................................................1-13

Configuring call control..........................................................................................1-17

Examples of ADSL-DMT interface configuration ............................................1-18

Configuring selective frequency bin loading..........................................................1-20

Configuring the Stinger to disable a frequency bin.........................................1-20

Checking status of ADSL-DMT interface................................................................1-21

Checking status of the physical interface.........................................................1-22

Obtaining statistics about operations............................................................... 1-24

Displaying ADSL-DMT port status and nailed groups .....................................1-25

Chapter 2 Configuring LIM and LIM Port Redundancy....................................2-1

Overview of LIM and LIM port redundancy............................................................ 2-1

Configuring LIM redundancy................................................................................... 2-1

Overview of the lim-sparing-config profile .......................................................2-2

Manual LIM redundancy................................................................................... 2-4

Automatic LIM redundancy ..............................................................................2-4

vi Stinger®ADSL 72-Port Annex A Line Interface Module (LIM) Guide

Contents

LIM redundancy with IRMs and LPM-Rs..........................................................2-6

Checking LIM redundancy status......................................................................2-8

Checking status with the rearslot command..................................................... 2-9

Configuring LIM port redundancy.....................................................................2-9

Enabling LIM port redundancy........................................................................2-11

Manual LIM port redundancy......................................................................... 2-11

Automatic LIM port redundancy..................................................................... 2-12

Checking the status of extended LIM port redundancy ..................................2-12

Stinger®ADSL 72-Port Annex A Line Interface Module (LIM) Guide vii

Figures

Figure 1-1 ADSL 72-port Annex A LIM................................................................. 1-3

Figure 1-2 Noise margin parameters and power adjustments relationship.......... 1-14

Figure 1-3 Future noise margins and dynamic rate adaptation relationship ....... 1-16

Figure 1-4 ADSL ATM LIM configuration............................................................ 1-19

Figure 2-1 LIM redundancy in a Stinger FS unit ................................................... 2-2

Figure 2-2 LIM port redundancy on a Stinger FS unit......................................... 2-10

Stinger®ADSL 72-Port Annex A Line Interface Module (LIM) Guide ix

Tables

Table 1-1 Support for 72 port Annex A ADSL LIM............................................ 1-1

Table 1-2 ADSL 72-port Annex A LIM status lights............................................ 1-3

Andere Handbücher für Stinger

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Lucent Technologies Steuereinheit Handbücher

Lucent Technologies

Lucent Technologies PacketStar PSAX 1000 Bedienungsanleitung

Lucent Technologies

Lucent Technologies Stinger OC3-ATM Bedienungsanleitung

Lucent Technologies

Lucent Technologies Stinger STGR-LIM-AP-72 Bedienungsanleitung

Lucent Technologies

Lucent Technologies Stinger IP2000 Bedienungsanleitung

Lucent Technologies

Lucent Technologies LINEAGE 2000 FPS Bedienungsanleitung

Lucent Technologies

Lucent Technologies PacketStar PSAX 1250 Bedienungsanleitung

Lucent Technologies

Lucent Technologies PacketStar PSAX 8-Port Voice 2-Wire Station... Bedienungsanleitung

Lucent Technologies

Lucent Technologies Stinger STGR-LIM-AD-48 Bedienungsanleitung

Lucent Technologies

Lucent Technologies LINEAGE 2000 CP5 Bedienungsanleitung

Lucent Technologies

Lucent Technologies PacketStar PSAX 45N74 Bedienungsanleitung

Lucent Technologies

Lucent Technologies Stinger STGR-LIM-48 Bedienungsanleitung

Lucent Technologies

Lucent Technologies PacketStar PSAX Bedienungsanleitung

Lucent Technologies

Lucent Technologies Stinger OC12-ATM Bedienungsanleitung

Lucent Technologies

Lucent Technologies Merlin Magix Kurzanleitung

Lucent Technologies

Lucent Technologies CIB 3102 Bedienungsanleitung

Lucent Technologies

Lucent Technologies Stinger STGR-LIM-AC-48 Bedienungsanleitung

Lucent Technologies

Lucent Technologies LE-180XT Bedienungsanleitung

Lucent Technologies

Lucent Technologies PacketStar 20N32 Bedienungsanleitung

Lucent Technologies

Lucent Technologies PacketStar PSAX DS1/E1/DS0A CES Module Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung