Lucent Technologies Orinoco WavePOINT II Bedienungsanleitung

ORINOCO WavePOINT-II - Getting Started

Table of Contents

1 Welcome

Introducing ORiNOCO 1-1

■About the WavePOINT-II AP 1-2

Finding Information 1-6

■This Guide 1-6

■The ORiNOCO Manager User’s Guide 1-8

■The On-line Help Information 1-8

■Conventions Used in This Document 1-10

Kit Contents 1-11

Optionally Available Products 1-13

2 Installing the WavePOINT-II AP

Introduction 2-1

■WavePOINT-II AP Placement 2-1

■Indoor Antenna Placement 2-2

■Outdoor Antenna Placement 2-3

Table of Contents

ORINOCO WavePOINT-II - Getting Started

Hardware Installation 2-4

■Verifying Kit Contents 2-4

■Registering your ORiNOCO Products 2-4

■Placing Mounting Plate and Power Supply 2-6

■Mounting the Processor Module 2-8

■Connecting the Network Interfaces 2-9

■Mounting the Cover Plate 2-12

Powering-up 2-14

3 Beyond Quick-Start...

Introduction 3-1

■Connect Stations to your WavePOINT-II AP 3-2

■Configure your WavePOINT-II AP 3-3

A WavePOINT-II AP Specifications

B WavePOINT-II AP Start-up Configuration

Identify the Start-up Settings B-1

C Additional Installation Instructions

Removing the Cover Plate C-1

Technical Support

Table of Contents

iii iii

ORINOCO WavePOINT-II - Getting Started

iii

W Warranty Repair Card

About Warranty and Repair W-1

Limited Warranty W-2

List of Figures

List of Tables

Index

Table of Contents

ORINOCO WavePOINT-II - Getting Started

1-1

Welcome

Introducing ORiNOCO 1

Welcome to ORiNOCO, the easy way to wireless computing. Building your

own wireless network has never been easier.

This book introduces you to the ORiNOCO WavePOINT-II Access Point (AP),

and will help you to get your network “on the air” within a snap. It describes

the most common configurations and a quick start set-up.

To install and manage ORiNOCO products, it is assumed that you have a

working knowledge of installation procedures for network operating systems

under Microsoft Windows.

1-2

ORINOCO WavePOINT-II - Getting Started

Welcome - Introducing ORiNOCO

About the WavePOINT-II AP 1

The ORiNOCO WavePOINT-II AP bridge is a modular unit with an integrated

ethernet interface and two PC Card slots, that enable you to use your access

point with ORiNOCO PC Cards.

The dual slot design allows you to configure the access point to operate with

almost any combination of the wired and wireless network interfaces listed

above. This way your access point provides easy migration paths between

various generations of ORiNOCO products.

The ORiNOCO WavePOINT-II AP is a transparent Media Access Control

(MAC) bridge that exists in two versions:

■ORiNOCO WavePOINT-II AP.

■ORiNOCO Outdoor Router.

ORiNOCO WavePOINT-II Access Point 1

The access point is a wired to wireless bridge that you can use to connect

wireless cells to one another or to a wired (ethernet) Local Area Network

(LAN). The access point can serve mobile wireless stations roaming

between various locations within a network premises.

ORINOCO WavePOINT-II - Getting Started

1-3

Welcome - Introducing ORiNOCO

Figure 1-1 ORiNOCO WavePOINT-II AP

1-4

ORINOCO WavePOINT-II - Getting Started

Welcome - Introducing ORiNOCO

ORiNOCO Outdoor Router 1

The ORiNOCO Outdoor Router bridge1has been designed to serve a

wireless backbone between wireless cells and/or wireless (outdoor) antenna

link.

The ORiNOCO Outdoor Router device is based on the same hardware

design as the ORiNOCO WavePOINT-II AP. Besides its wireless point-to-

point bridging functionality, the ORiNOCO Outdoor Router also supports the

access point features as described on the previous page.

Figure 1-2 ORiNOCO Outdoor Router

1 Previously known as WavePOINT-II PTP and WaveACCESS Office Router

ORINOCO WavePOINT-II - Getting Started

1-5

Welcome - Introducing ORiNOCO

WhenyouwishtousetheORiNOCOOutdoorRouterinanoutdoorantenna

installation, you are advised to consult the information described in the

“Outdoor Antenna Installation Guide", which can be downloaded from the

document Library on the ORiNOCO website at: http://www.lucent.com/

orinoco.

NOTE:

To install the ORiNOCO WavePOINT-II AP, you will need at least

one ORiNOCO PC Card. This card is not included with your

ORiNOCO WavePOINT-II kit, but must be ordered as an additional

item. For more information about the various card types available

please refer to the “ORiNOCO Manager User’s Guide”.

Inhaltsverzeichnis

Andere Lucent Technologies Drahtloser Zugangspunkt Handbücher

Lucent Technologies

Lucent Technologies AP-3 Bedienungsanleitung

Lucent Technologies

Lucent Technologies WaveACCESS NET MDR232 Bedienungsanleitung

Lucent Technologies

Lucent Technologies WavePoint-II Bedienungsanleitung

Lucent Technologies

Lucent Technologies AP-1 Bedienungsanleitung

Lucent Technologies

Lucent Technologies SLC-2000 Access System Central Office... Fehlerbehebungshandbuch

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung