LUNATONE DALI Bedienungsanleitung

DALI Display 7”

Quick Start Guide

Control Device

DALI Input- and ontroldevice with

7” Display and Touchpanel

Version 1.0.6

DALI Display

ontrol Device

Content

1. DALI Display – Features and Installation ......................................................................................... 3

1.1 Intended Use ....................................................................................................................... 3

1.2 Safety Instructions ............................................................................................................... 3

1.3 Features ............................................................................................................................... 3

1.4 Specification ........................................................................................................................ 4

1.5 Installation ........................................................................................................................... 5

2. Elementary Operating Functions ..................................................................................................... 6

3. Extended Operating Functions ........................................................................................................ 9

4. onfiguration and Settings ............................................................................................................ 10

4.1 Design ................................................................................................................................ 12

4.2 Screensaver and Pincode Protection ................................................................................. 13

4.3 Date and Time ................................................................................................................... 14

4.4 Menu Bar ........................................................................................................................... 14

4.5 Site Numbering .................................................................................................................. 14

5. ommissioning .............................................................................................................................. 15

5.1 Adressing/Grouping ........................................................................................................... 15

5.2 Scenes and olor Scenes ................................................................................................... 18

5.3 Sequence (SQ), day-schedules (SDL), week-schedules (SDLL) ........................................... 23

5.4 Human entric Lighting – ircadian daylight progression ................................................ 26

6. Ethernet – Remote ontrol ........................................................................................................... 27

7. System Update .............................................................................................................................. 31

8. ustom design ............................................................................................................................... 32

8.1 Photo of room with integrated luminary control .............................................................. 32

8.2 Room overview of a floor with controllable luminaries .................................................... 32

9. Additional Information and Equipment ........................................................................................ 34

10. Disclaimer .................................................................................................................................. 34

11. Glossary ..................................................................................................................................... 34

1. DALI Display – Features and Installation

1.1 Intended se

The DALI Display can be used for commissioning and control of DALI lighting systems. DALI is a

standardized digital protocol for the control of electronic ballasts for lighting systems according to

standard IE 62386. Exclusively ballast with DALI interface may be connected to one of the DALI-lines.

1.2 Safety Instructions

When operating the DALI display the following precautions must be considered:

Each user must carefully read and follow the instructions given in the manual.

The operator must ensure that the wiring instructions and specifications for DALI lines are

considered, the installation of the display must be performed by an qualified technician, who can

perform the required tasks and recognize potential danger due to professional training, knowledge

and experience, in particular the knowledge of pertinent regulations and standards.

Touching the screen with sharp objects can result in damage of the display.

1.3 Features

The DALI Display has connectors for two DALI lines (DALI A, DALI B). This allows installing up to 128

DALI ballasts.

Light control commands are based on DALI Scenes and Groups and are sent to both DALI lines

simultaneously. Scene commands are sent broadcast, group commands only to an individual DALI

group.

There are 16 Scenes and 16 Groups available for both DALI busses:

Number of DALI short addresses: 128

Number of DALI Groups: 16

Number of DALI Scenes: 16

Multi-Master apability: Multiple control devices can be used on the DALI-lines.

DALI ommands received on DALI line A are mirrored to DALI line B, this means that control devices

connected to DALI A can also control ballasts on DALI B.

ommands received on DALI B are not mirrored to DALI A, this allows to install controllers that only

affect one of the two DALI busses.

The DALI Display is a commissioning, control and input device for DALI controlled electronic ballasts.

Beside scene and group commands, algorithms for commissioning (addressing, grouping and scene

configuration) and automatic running processes (sequences, schedules and schedule lists) are

provided. Special methods like human centric lighting (circadian daylight trend) and colour control of

RGB-Dimmers is supported with the help of DALI Device Type 8 (DT8) standard.

By naming groups, scenes and automatic processes, custom backgrounds and screen saver image,

the device can be individually adapted to the application. Furthermore custom designed layouts are

offered as a manufacturer service.

The display can be controlled via the 7” touch control panel, but also via remote access through

Ethernet and hence can be operated via browser.

1.4 Specification

type DALI Display 7”

article number 86458626

Rated supply voltage mains adapter (included) 230-240VA

Mains frequency mains adapter 50/60Hz

Rated supply voltage DALI Display 7” 24-48V D (power supply)

or Power over Ethernet (PoE)

Power consumption 10W

Number of DALI lines 2

urrent consumption of each DALI-line 2mA

Ambient temperature 0-50°

Touchscreen size 7”

Touchscreen pixel 800 x 640

olours 64k

Interface 2xDALI, USB, Ethernet

Dimensions L x W x H 200 x 150 x 20 mm

Type of protection IP20

Firmware (last recent version) V104

1.5 Installation

The DALI Display does not provide any power supply for the DALI-lines. Therefore an external DALI

power supply (e.g. DALI PS) has to be installed for each DALI-line. The D power supply (PS36V),

which is included in the delivery package, is meant to supply the display only. It is not suitable for the

supply of a DALI-Line. Instead of using a PS36V the display can also be powered via POE.

typical installation

2. Elementary Operating Functions

The control of groups and scenes, using the buttons of predefined pages, is summarized under the

term of “elementary operating functions”. There are sites available for recalling scenes as well as for

switching and dimming of groups (unused pages can be disabled in the settings).

1) Recall Scenes

onfiguration OFF-Button (Long Press): Selection of effective range for OFF- md (the setting is valid

for any OFF-Button and does not depend on active site). Up from V1.0.6 the scheduler function can

be selected to be stopped as well as a scene can be recalled by the OFF-Button

Dim P/DOWN

Sent Broadcast or to

individual groups.

(Selectable on the layout

configuration page)

Previous / Next

Page

Displayed pages can be

configured on the layout

configuration page.

Goto SceneX

Additional settings: long

press on button

OFF

Sent Broadcast or to

individual groups.

(Settings: long press

on button)

Settings

Page

Home

onfiguration of Scene-Button (Long Press): Selection of Goto Scene, yclic Scene Recall, Start of

Sequences, Schedules or Schedule List. Up from V106 it is possible to start/stop the circadian

function. Due to assigning of special functions to a scene the function can be controlled from another

device that recalls the corresponding scene.

2) Group Control

Dim P/DOWN

Send UP or DOWN

commands as long as the

button is pressed. (Only

available if the group is

ON)

Grou

p ON/OFF

Sends Recall MAX or OFF

to switch group ON / OFF

Previous Next

Page

Displayed pages can be

configured on the layout

configuration page.

OFF

Sent Broadcast or to

individual groups.

(Settings: long press

on button)

Home

This design symbolizes

that the group is OFF

Settings

Page

3) 16 Groups - Control and Status Display

4) Cleaning Page (Deactivation of Touchscreen)

Group ON/OFF

Sends Recall MAX or OFF

to switch group ON / OFF

It is also possible to dim

the group by pressing

and holding a group

button.

This design symbolizes

that the group is ON

This design symbolizes

that the

group is OFF

Deactivate the touch

panel for 20 seconds to

clean the screen.

3. Extended Operating Functions

Extended operating functions offer additional control methods, which require either a set-up

procedure before usage or a control gear with specific DALI device type (DT8).

1) Automatic Processes (sequences, schedules, schedule lists)

2) Color Control for RGB-devices (DT8-Type: RGBWAF)

On this site a color can be selected and is immediately sent to the selected operating range.

Selection of

sequence,

schedule or

schedule list

Hold the button to open

the pop-up window to

load other processes

Dim P/DOWN

Sent Broadcast or to

individual groups.

(Selectable on the layout

configuration page)

operating range

Short press: ON/OFF operating

range

Selection of operating range

Each group with DT8 (RGB) control gears

or Broadcast can be selected.

Color selection

color information is sent

to operating range

immediately after tipping

on the color

Start/Stop/Pause

control of the selected

process

indicator for running process

This symbol is shown on each site, when

process is active

RGBWAF - Details

Enter PopUp for detailed

settings

RGBWAF Details:

For each group which has been identified as DALI DT8 color type RGBWAF and for broadcast the

channels can be configured in detail [allowed range: 0…254, MASK). Furthermore the operating

range can be selected.

4. Configuration and Settings

Via the gear wheel button in the menu bar the setting page can be entered.

The menu “ onfiguration” and the button with the clock-symbol refer to display and layout related

settings, whereas the other menus are either used for commissioning or for activating functions.

Please find a overview of the display-related settings below.

Date, Time &

Timezone

Configuration

Display

Operating Range

Channels

Switch / Dim Operating Range

Inhaltsverzeichnis

Andere LUNATONE Bedienfeld Handbücher

LUNATONE

LUNATONE 24035465 Bedienungsanleitung

Beliebte Bedienfeld Handbücher anderer Marken

RDZ

RDZ PC-HRX Bedienungsanleitung

STG-BEIKIRCH

STG-BEIKIRCH MZ3 Technisches Handbuch

Efka

Efka Variocontrol V810 Bedienungsanleitung

Cebora

Cebora 208-10 Bedienungsanleitung

AMX

AMX AutoPatch CP-15 Bedienungsanleitung

Satel

Satel CA-6 KLED-S Bedienungsanleitung

Evolution

Evolution IQ plus 800 Bedienungsanleitung

Fagor

Fagor 8040 TCO CNC Bedienungsanleitung

Trane

Trane ComfortLink II XL950 Control Bedienungsanleitung

AKO

AKO PROCool AKO-17635-2 Bedienungsanleitung

ABB

ABB 6136/30M-101 Bedienungsanleitung

Telikou

Telikou BK-603 Belt Pack Bedienungsanleitung

Mapei

Mapei Mapeheat Thermo Touch Bedienungsanleitung

Bosch

Bosch D9412GV4 Bedienungsanleitung

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 Bedienungsanleitung

Sminn

Sminn BOX L VF1L EI Bedienungsanleitung

Balboa

Balboa TP600 Bedienungsanleitung

Nice

Nice HSCU1 Technische Daten