Lutron Electronics DM-9961 Bedienungsanleitung

True RMS

AUTO RANGE

MULTIMETE

CAT III-1000 V cate

ory, Auto ran

e, REL, Capacitanc

Hz, Duty, ACV, ACA, DCV, DCA, Ohm

Caution Symbol

Caution :

* Risk of electric shock !

Caution :

* Do not apply the overload

voltage, current to the input

terminal !

* Remove test leads before open

the battery cover !

* Cleaning - Only use the dry

cloth to clean the plastic case !

Environment Conditions

* Installation Categories III-1000V.

* Pollution Degree 2.

* Altitude up to 2000 meters.

* Indoor use.

* Relative humidity 80% max.

TABLE OF CONTENTS

1. FEATURES................................................................

2. SPECIFICATIONS.....................................................

2-1 General Specifications.......................................... 2

2-2 Electrical Specifications........................................ 3

3. FRONT PANEL DESCRIPTION..................................... 6

4. PRECAUTIONS & PREPARATIONS FOR

MEASUREMENT......................................................... 8

5. MEASURING PROCEDURE..........................................

5-1 Symbols & Units of Display .................................9

5-2 DC voltage, AC voltage Measurement ................

5-3 Resistance Measurement.....................................10

5-4 DC current, AC current Measurement .................11

5-5 Continuity Check ...............................................

5-6 Diode Test ........................................................

5-7 Capacitance Measurement..................................

5-8 Frequency, DUTY Measurement...........................15

5-9 Relative Measurement........................................

5-10 Data Hold Operation.......................................... 16

6. MAINTENANCE..........................................................17

6-1 Replacement of Battery.......................................

6-2 Cleaning.............................................................

6-3 Replacement of Fuse...........................................

7. OPTIONAL ACCESSORIES & ADAPTERS .....................

8. THE ADDRESS OF AFTER SERVICE CENTER................20

1. FEATURES

* True RMS ACV, ACA measurement

* Meet IEC 1010 CAT III 1000 V safety requirement.

* Large LCD display with measurement unit.

* Multi function measurement. DCV, ACV, DCA, ACA,

Resistance, Capacitance, Frequency, Duty, Diode,

Continuity beeper.

* Data hold.

* Relative measurement.

* Auto range with manual range selection.

* When make the ACV, ACA measurement, it

also can measure the signal frequency, % duty at

the same time.

* 4000 counts A/D, high resolution.

* Both 10 A, mA, uA current are build fuse for safety

consideration.

* 10 M ohm impedance for voltage circuit.

* Operates from one DC 9V battery,

* Built-in overload protection for most ranges.

* Uses durable, long-lasting components, enclosed in

strong, light weight ABS-plastic housing.

* Full line optional adapters : Clamp adapter,

Tachometer adapter, Pressure adapter, Humidity

Adapter, Sound level adapter, Anemometer adapter,

Light adapter, EMF adapter.

2. SPECIFICATIONS

2-1 General Specification

Display 65 mm x 48 mm large LCD display

with bar graph indicator.

Measurement DCV, ACV, DCA, ACA, Resistance,

Capacitance, Frequency, Duty,

Diode, Continuity beeper.

A/D counts no. 4000 counts.

Range selection Auto range with manual range

selecting.

Special function Relative measurement, Data hold.

Data hold To freeze the display reading on the

LCD display.

Power On/Off Auto power of or manual power off.

management

@ Details please refer page 8

Relative To offset the measurement value.

measurement

Polarity Automatic Switching, " - " indicates

negative polarity.

Zero adjustment Automatic.

Sampling time Approx. 0.5 to 1 second.

Operating 0 to 50 (32 to 122 ),℃℉

Temp. & humidity Max. 80% RH.

Power supply 006 p dc 9V battery.

Power Approx. DC 1.7 mA.

consumption

Dimension 185 x 88 x 40 mm

( 7.3 x 3.5 x 1.6 inch )

Weight 350 g/0.77 LB.

Accessories Red and Black Test Leads

Included ( CAT III 1KV Test Leads )...... 1 Set

0.5 Amp Spare Fuse................ 1 PC

Instruction Manual..................

1 PC

Optional Full line adapters :

accessories ACA/DCA current adapter,

Tachometer adapter,

Humidity adapter, Pressure adapter,

Light adapter, EMF adapter,

Sound level adapter,

High voltage probe.

2-2 Electrical Specifications (23±5

)

℃

DC Voltage

Range 400.0 mV /4 V/40 V/400 V/1000 V

Resolution 0.1 mV /1 mV /10 mV /100m V/1 V

Accuracy ± (0.5%+2d )

Input impedance 10 M ohm.

Over load ± 500 DCV, 350 ACV - 400 mV range.

protection ± 1000 DCV, 1000 ACV - other ranges.

AC Voltage ( True RMS )

Range 4 V/40 V/400 V/1000 V

Resolution 1 mV /10 mV /100m V/1 V

Accuracy ± (1%+2d )

* Spec. are tested under 50/60 Hz.

Input impedance 10 M ohm.

Over load ± 1000 DCV, 1000 ACV - other ranges.

protection

AC Current ( True RMS )

DC Current

Range 10 A/400 mA/40 mA/4000 uA/400 uA

Resolution 10 mA/0.1 mA/0.01 mA/1 uA/0.1 uA

Accuracy 400 mA/40 mA/4000 uA/400 uA :

± (0.5%+2d )

10 A :

± (1.5%+2d )

* ACA spec. are tested under 50/60 Hz.

Over load 10A range : 10A fuse.

protection uA, mA range : 500 mA fuse.

Diode ( Forward voltage, VF )

Range 4 V DC.

Resolution 0.001 V.

Accuracy ± (0.5%+2d )

Capacitance

Range 40 nF/400 nF/4 uF/40 uF

Resolution 10 pF/0.1 nF/1 nF/10 nF

Accuracy < 2 nF : ± (3%+20d )

Others : ± (3%+1d )

Frequency

Range 4 Hz/40 Hz/400 Hz/4 KHz/40 KHz/

400 KHz/4 MHz

Resolution 0.001 Hz/0.01 Hz/0.1 Hz/0.001 KHz/0.01 KHz

0.1 KHz/0.001 MHz

Accuracy ± (0.5%+2d )

Sensitivity Min. 1.5 V rms, Max. 5 V rms.

Duty

Range 1 % to 99 %

Resolution 0.1 %

Accuracy ± 1% duty

Measuring signal Function switch set to " Hz " :

and level 2 Vp-p to 5 Vp-p,

square wave 10 KHz max.

Function switch set to "ACV", "ACA" :

50 Hz to 500 Hz

OHMS

Range 400/4 K/40 K/400 K/4 M/40 M ohm

Resolution 0.1/1/10/100/1 K/10 K ohm

Accuracy 400 ohm ± (0.5%+2d )

4K/40K/400K/4 M

40 M ± (2%+5d )

Over load ± 500 DCV, 350 ACV

protection

Continuity Beeper

Beeper will sound if measured resistance less than 20 ohm.

Remark :

* Spec. tested under the environment RF Field Strength less

than 3 V/M & frequency less than the 30 MHz only.

3. FRONT PANEL DESCRIPTION

Fig. 1

3-1 Display

3-2 HOLD button

3-3 Hz/DUTY button

3-4 REL button

3-5 DCA/ACA button

3-6 RANGE button

3-7 Ohm/Diode/Buzzer button

3-8 Function rotary switch

3-9 10A input terminal

3-10 mA/uA input terminal

3-11 COM input terminal

3-12 Voltage/Ohm/Cap./Hz input terminal

3-13 Battery compartment/Cover

3-14 Stand

Inhaltsverzeichnis

Andere Lutron Electronics Multimeter Handbücher

Lutron Electronics

Lutron Electronics DM-9962SD Bedienungsanleitung

Lutron Electronics

Lutron Electronics DM-9983G Bedienungsanleitung

Lutron Electronics

Lutron Electronics LCR-9184 Bedienungsanleitung

Lutron Electronics

Lutron Electronics DM-9030 Bedienungsanleitung

Lutron Electronics

Lutron Electronics AM-4205A Bedienungsanleitung

Beliebte Multimeter Handbücher anderer Marken

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung