8
Electrical safety
• The connector plug on the product must
fit into the socket. Under no circum-
stances alter the plug. Do not use earthed
electrical tools in conjunction with an
adapter. Unmodified plugs and suitable
sockets reduce the risk of electric shock.
• Avoid physical contact with grounded
surfaces, such as those of pipes, radia-
tors, cookers and refrigerators. The risk
of electric shock increases if your body is
earthed.
• Keep electrical tools away from rain and
wet. The risk of electric shock increases if
water penetrates an electrical tool.
• Switch off device in case of power inter-
ruption and pull mains plug. This prevents
the unintentional use of the use in case of
voltage return.
• Check whether the locking device is
locked and lock this if required in case of
power interruption and each setting of
the device. Otherwise the device may
start unexpectedly when the power is
supplied.
• Do not use the cable to carry the product,
hang it up or pull the plug out of the
socket. Keep the cable away from heat,
oil, sharp edges and any moving machine
parts. Damaged or tangled cables
increase the risk of electric shock.
• If the connecting cable becomes dam-
aged, it must be replaced by an expert.
• If you require to work with an extension
cable, this must be approved for this
application field and must have sufficient
cross-section. Otherwise power loss in
case of the device and overheating of the
cable may occur. If you are not certain,
contact a specialist.
• If you use an electrical tool outdoors, use
only extension cables suitable for out-
door use. Using an extension cable that is
suitable for outdoor use reduces the risk
of electric shock.
• When operating the electrical tool in a
damp environment cannot be avoided,
use a fault current circuit breaker with a
trip current of 30 mA or less. The use of a
fault current circuit breaker reduces the
risk of electric shock.
• Do not overload the product. Carry out
your work using only the electrical tool
intended. You will work more efficiently
and safely if you use the correct electrical
tool within its stated performance range.
• Do not use an electrical tool with a defec-
tive switch. A electrical tool that can be
no longer switched on or off is dangerous
and must be repaired.
• Pull the plug from the socket and/or
remove the rechargeable battery before
making adjustments, replacing compo-
nents or putting the device away. These
precautionary measures will prevent the
device from being started accidentally.
• Keep unused electrical tools out of the
reach of children. Do not allow the prod-
uct to be used by anyone who is not
familiar with it or has not read these oper-
ating instructions. Electrical tools are
dangerous if used by inexperienced per-
sons.
• Handle electrical tools with care. Check
that moving parts are functioning prop-
erly and do not stick, whether parts are
broken or have been damaged in a way
that impairs the function of the electrical
tool. Have the damaged parts repaired
before you use the product. Poorly main-
tained electrical tools are a common
cause of accidents.
• Use electrical tools, accessories, inter-
changeable tools etc. in accordance with
these instructions. In doing so, take
working conditions and the work to be
performed into consideration.
• Using electrical tools for applications
other than those intended can result in
dangerous situations.
• Remove the setting tools or spanners
before switching on the device. A tool or
spanner left in a rotating part of the prod-
uct can result in injury.
• Avoid unintentional operation. Make sure
that the device is switched off before it is
connected to the power supply and/or
battery, removed or carried. Carrying the
electrical tool with your finger on the
switch or connected to the power supply
can lead to accidents.
Safety instructions for lawn mowers
• Keep the power cable away from the
rotating blades. The blades can damage
the cable and result in an electric shock.
• Do not touch the rotating blades until the
product has been disconnected from the
mains and the blades have come to a
complete standstill.
• Always hold the product firmly in both
hands.
GB
