Luxul XFS-1084P Bedienungsanleitung

Simply Connected

Use the XFS-1084P to:

Cost-Effectively Expand a Wired Network

Deliver Power and Data for up to Four PoE-Enabled

Network Devices

Simplify the Installation of IP Security, VoIP and

other Network Applications

Quick Install Guide

XFS-1084P

8-Port Fast Ethernet PoE Switch

a: 14203 Minuteman Drive, Ste 201, Draper, UT 84020-1685

p: 801-822-5450

Quick Install Guide

XFS-1084P

Quick Install Guide

Model Number: XFS-1084P

8-Port Fast Ethernet PoE Switch

No part of this publication may be modiﬁed or adapted in any way,

for any purposes without permission in writing from Luxul. The mate-

rial in this manual is subject to change without notice. Luxul reserves

the right to make changes to any product to improve reliability, func-

tion, or design. No license is granted, either expressly or by implication

or otherwise under any Luxul intellectual property rights. An implied

license only exists for equipment, circuits and subsystems contained

in this or any Luxul product.

DOCUMENT CONVENTIONS

The following graphical alerts are used to indicate notable situations:

NOTE: Tips, hints, or special requirements that you should

take note of.

CAUTION: Care is required. Disregarding a caution can

result in data loss or equipment malfunction.

WARNING!: Indicates a condition or procedure that could

result in personal injury or equipment damage.

Trademarks are property of respective holders.

Simply Connected

FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

CONTACT LUXUL

Sales

P: 801-822-5450

E: [email protected]

Technical Support

P: 801-822-5450

E: suppor[email protected]

Package Contents

Please check the contents carefully after you open the packing:

 XFS-1084P 8-Port Fast Ethernet PoE Switch

 Power Adapter and Cord

 Quick Install Guide

If any of the listed items are missing or damaged, please contact

the reseller from whom you purchased the XFS-1084P for

return/replacement.

a: 14203 Minuteman Drive, Ste 201, Draper, UT 84020-1685

p: 801-822-5450

Quick Install Guide

XFS-1084P

HARDWARE DESCRIPTION

Front Panel

The front panel of the XFS-1084P includes 8 Link/Activity LEDs, one

power LED, four PoE Status LEDs and one PoE Max LED. Please refer to

the detailed description of these indicators in Section 2.2 below.

XFS-1084P Front Panel View

LED Indicators

The LED indicators of the XFS-1084P include 8 Link/Activity LEDs,

one power LED, four PoE Status LEDs and one PoE Max LED. These

LED indicators show the operating status of the XFS-1084P and

each switch connection.

The following chart shows the LED indicators of the XFS-1084P along

with an explanation of the indicator’s properties:

Trademarks are property of respective holders.

Simply Connected

LED Color Status Description

Power Green ON The XFS-1084P is powered

— OFF Check the DC power supply to

ensure proper connection to the

outlet and the XFS-1084P.

PoE Max Red ON Maximum output wattage reached

Red Flashing Maximum output wattage

exceeded

— OFF Maximum output wattage not

reached

PoE Status Green ON Delivering PoE power to

connected device

Green Flashing Can indicate an Ethernet cable

short or the connected device

is attempting to draw more than

15.4W

OFF No PoE power being delivered

LINK/ACT Green ON Indicates the XFS-1084P is

connected.

Green Flashing Indicates the XFS-1084P is trans-

mitting/receiving data packets.

— OFF Indicates the port is not con-

nected to a device.

a: 14203 Minuteman Drive, Ste 201, Draper, UT 84020-1685

p: 801-822-5450

Quick Install Guide

XFS-1084P

Rear Panel Layout

The Rear Panel of the XFS-1084P includes eight 10/100Mbps RJ-45

Ethernet ports and one DC power port used for DC power input.

XFS-1084P Rear Panel View

CAUTION: Please use the included power supply. If a

different power supply is used, it could damage

the XFS-1084P

PREPARING FOR INSTALLATION

System Requirements

Ethernet Cables to connect the XFS-1084P to Ethernet

enabled devices

 Power should be 48VDC @ 1.25A

Trademarks are property of respective holders.

Simply Connected

Installation Requirements

Install the XFS-1084P in a stable/safe place to avoid any

possible damage

Inspect the AC power cord to ensure that it is correctly

connected and undamaged

To avoid electric shock, DO NOT open the XFS-1084P housing

(no user serviceable parts inside). Opening the XFS-1084P will

void your warranty.

It is recommended that the Grounding connection to the outlet is

functioning properly and the XFS-1084P is positioned away from

direct sun light

Ensure there is sufﬁcient space around the XFS-1084P for proper

ventilation and heat dissipation. It is recommended to have at least

4-6 inches around all sides.

Before Connecting to the Network

Before connecting the XFS-1084P to the network, please check the

following:

 Determine placement location. Do not place any heavy articles on

the XFS-1084P.

 Ensure there is adequate space for proper heat dissipation and

ventilation around the XFS-1084P.

 Power socket should be within 4 feet of the XFS-1084P.

 Check power adapter to conﬁrm safe and secure connection.

a: 14203 Minuteman Drive, Ste 201, Draper, UT 84020-1685

p: 801-822-5450

Quick Install Guide

XFS-1084P

XFS-1084P INSTALLATION

Connecting Devices

Use standard Ethernet CAT5, CAT5e or CAT6 cable to connect

the XFS-1084P to a device as described below. The XFS-1084P will

automatically adjust to the characteristics (speed/duplex) of the

device to which it is connected. The PoE function is autosensing.

As long as the powered device is 802.3af compliant, the switch will

provide power.

NOTE: Legacy PoE devices or 802.3at devices that need

more that 15.4Watts can not be powered by the

switch

87654321

PoE

48V 1.25A

Connecting the XFS-1084P to a Device

Trademarks are property of respective holders.

Simply Connected

When a device is properly connected, the Link/Activity LEDs for each

port lights up green. Please refer to the LED Indicators section for

deﬁ nitions and troubleshooting.

Connecting to a Router or Other Switch

Connecting the XFS-1084P to a Router and Devices

When a device is properly connected, the Link/Activity LEDs for each

port lights up green. Please refer to the LED Indicators section for

deﬁ nitions and troubleshooting.

NOTE: ports 1-4 are the POE ports and should not be used

for the uplink connection

LUX-QIG-XFS-1084P

0829140315

a: 14203 Minuteman Drive, Ste 201, Draper, UT 84020-1685

luxul.com | 801-822-5450

Information on this document supersedes all previous versions. Products

and documents subject to change without notice. Products may be

discontinued without notice.

FCC Statement:

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment uses and can radiate radio frequency energy, and if

not installed and used in accordance with the instructions may cause harmful

interference to radio communications. However; there is no guarantee that in-

terference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Hereby, Luxul, 14203 Minuteman Drive, Suite 201, Draper, Utah,

84020, declares that this Luxul XAP-1500 is in compliance with

the essential requirements and other relevant provisions of

Directive 1999/5/EC.

For a copy of this report send a self addressed stamped

envelope to:

Luxul CE, 14203 Minuteman Drive, Suite 201, Draper, Utah, 84020.

Andere Handbücher für XFS-1084P

Inhaltsverzeichnis

Andere Luxul Netzwerk-Router Handbücher

Luxul

Luxul Epic 3 XWR-3150 Bedienungsanleitung

Luxul

Luxul XBR-2300 Bedienungsanleitung

Luxul

Luxul ABR-4400 Bedienungsanleitung

Luxul

Luxul Epic 5 Bedienungsanleitung

Luxul

Luxul EPIC 4 Bedienungsanleitung

Luxul

Luxul XBR-2300 Bedienungsanleitung

Luxul

Luxul XVS-F5 Bedienungsanleitung

Luxul

Luxul EPIC 4 Bedienungsanleitung

Luxul

Luxul Dual-Band AC3100 Bedienungsanleitung

Luxul

Luxul XBR-4400 Bedienungsanleitung

Luxul

Luxul Epic 4 XBR-4500 Bedienungsanleitung

Luxul

Luxul XBR-2300 Bedienungsanleitung

Luxul

Luxul XGS-1024 Bedienungsanleitung

Luxul

Luxul XBR-4400 Bedienungsanleitung

Luxul

Luxul XBR-2300 Bedienungsanleitung

Luxul

Luxul XMS-1024 Bedienungsanleitung

Luxul

Luxul Epic 3 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise