driver. Note: If the "USB Composite Device" has already been installed then
Windo s ill skip this step. This ill occur if a USB audio device had
previously been installed in your system.
3. Windo s ill report that “USB Duo Ne Hard are” as found. When the
Add Ne Hard are Wizard reports that it ants to search for a driver for a
USB Composite Device, click "Next".
4. On the next screen select the "Search for the best driver for your device." item,
and then click "Next".
5. On the next screen, remove the check marks from all of the optional search
locations except "Specify a location." Insert the included Driver CD, click
“Bro se,” then, on your computer’s CD drive, locate the folder
“USB_AUDIO\DUO\WIN98SE.” Click "Next".
6. On the next screen, Windo s ill indicate it has found an updated driver for
this device. Keep the updated driver selected and click "Next".
7. Windo s ill report that is it ready to install the driver. Click "Next" to
continue.
8. Windo s ill process the files and then indicate it has finished installing the
soft are that your ne hard are device requires. Click the "Finish" button.
You ill need to repeat this step as many times as Windo s finds a ne
hard are device. By the time everything is finished you ill have installed
the Duo’s Windo s MME drivers, plus the ASIO and EASI drivers.
9. Windo s might indicate it cannot find a file it is attempting to copy from the
Windo s 98 CD. If so, insert your Windo s 98 Second Edition CD, then use
the Bro se button to point to this CD and continue.
10. Windo s ill process the files and then indicate it has finished installing the
soft are that your ne hard are device requires. Click the "Finish" button.
Note: At this point you might need to wait for several minutes while
Windows configures the hardware. Please be patient.
11. Restart the computer after the installation is finished.
Hardware & Software Installation on the Mac
Here is a simple, step-by-step procedure for attaching and powering up the Duo
on the Macintosh Computer. The Duo comes with an installer program that will
place all driver components in their proper folders.
The installer program will give you a list of ASIO compliant programs that it
will recognize and subsequently install the appropriate ASIO driver if the
program exists on your system (that being said, it is a good idea to first install
your music program before installing the Duo drivers, though Duo drivers can be
installed again if necessary). Otherwise, the Duo ASIO drivers (and the
remaining ASIO drivers that have not been used) will be placed in a folder on
your desktop called “Duo ASIO,” and must be inserted into your music
program’s ASIO folder manually, provided that your music program uses ASIO.
1. On the Driver Disk that came ith your Duo, locate the folder
“USB_Audio_Duo” that contains the USB Duo Installer for the Macintosh.
9
