M-Audio Revolution 7.1 Bedienungsanleitung

III. Mac OS X Installation

Step 1 - Install the Card

Shut your computer down and insert the Revolution PCI card into an

empty PCI slot. For specific instructions on how to do this, please refer to

the Revolution Manual, Hardware Setup section.

Step 2 - Open the M-Audio Revolution CD

Insert the Revolution CD ROM into your Macintosh CD ROM drive and

double-click on the Revolution CD icon that will appear on your desktop.

Step 3 - Open the Mac OS X folder

In the Revolution CD ROM window, double click on the Mac OS X folder.

Step 4 - Run the Installer

Double click on the M-Audio Revolution Software.dmg file. A virtual disk

called M-Audio Revolution Software will open on your desktop. Double-

click on the M-Audio Revolution Software.mpkg and follow the instructions

on each screen.

Step 5 - Connect the Speakers

A typical system using the Revolution has between two and eight speakers.

Connect the Left, Right, Center, Subwoofer, Left Surround, and Right

Surround speakers to the jacks on the Revolution. You can connect an

additional two speakers for Left Center and Right Center Surround if you

have them.

Step 6 - Test your Installation

Play a DVD or other surround movie to enjoy your new surround system.

Open the Revolution control panel to activate Circle Surround II™ and

adjust the speaker settings.

Still need more info? Refer to the manual now, as it will

discuss the setup process in a lot greater detail.

For information on other M-Audio products, vist our website at

www.m-audio.com

Quick Start Guide

for the

Revolution 7.1

High-Definition Surround Sound Card

This guide is intended to help get you started quickly.

In order to achieve optimal usage of your new

soundcard we recommend that you carefully study the

enclosed product manual, either after completing the

process described in this guide or, if generally

unfamiliar with computer hardware installation.

™

01-07-03

I. Windows Installation

Step 1 - Install the Card:

Shut your computer down and insert the Revolution PCI card into an

empty PCI slot. For specific instructions on how to do this, please refer to

the Revolution Manual, Hardware Setup section.

Step 2 - Install the Drivers:

Start your computer up. Have your CD ROM ready at hand and insert it in

your computer’s CD ROM tray as the Windows Hardware Wizard comes

up. When it does, click “Recommended.” Windows will automatically find

the hardware drivers from the CD ROM.

Attention: If you are a Windows 2000 or Windows Me user, you must

have Direct X 8.1 installed in your system before installing the

Revolution software. Direct X 8.1 is included on the driver CD for

your convenience.

Step 3 - Connect the Speakers:

A typical system using the Revolution has between two and eight speakers.

Connect the Left, Right, Center, Subwoofer, Left Surround, and Right

Surround speakers to the jacks on the Revolution. You can connect an

additional two speakers for Left Center and Right Center Surround if you

have them.

Step 4 - Test your Installation:

Play a DVD or other surround movie to enjoy your new surround system.

Open the Revolution Control Panel to adjust the speaker settings. If your

current DVD player does not decode a surround sound signal, install

“WinDVD 4” from the included “Applications” CD.

II. Mac OS 9.2.2 Installation

Step 1 - Install the Card:

Shut your computer down and insert the Revolution PCI card into an

empty PCI slot. For specific instructions on how to do this, please refer to

the Revolution Manual, Hardware Setup section.

Attention: While Mac OS 8.6 meets the minimum system

requirements, we recommend OS 9.2.2 for optimal audio

performance with your Revolution card.

Step 2 - Open the M-Audio Revolution CD

Insert the Revolution CD ROM into your Macintosh CD ROM drive and

double-click on the Revolution CD icon that will appear on your desktop.

Step 3 - Open the Mac OS 9.2.2 folder

In the Revolution CD ROM window, double click on the Mac OS 9.2.2 folder.

Step 4 - Run the Installer

Double click on the Install Revolution application Icon and follow the

instructions on each screen.

Step 5 - Connect the Speakers

A typical system using the Revolution has between two and eight speakers.

Connect the Left, Right, Center, Subwoofer, Left Surround, and Right

Surround speakers to the jacks on the Revolution. You can connect an

additional two speakers for Left Center and Right Center Surround if you

have them.

Step 6 - Test your Installation

Play a DVD or other surround movie to enjoy your new surround system.

Open the Revolution control panel to activate Circle Surround II™ and

adjust the speaker settings.

I. Windows Installation

Step 1 - Install the Card:

Shut your computer down and insert the Revolution PCI card into an

empty PCI slot. For specific instructions on how to do this, please refer to

the Revolution Manual, Hardware Setup section.

Step 2 - Install the Drivers:

Start your computer up. Have your CD ROM ready at hand and insert it in

your computer’s CD ROM tray as the Windows Hardware Wizard comes

up. When it does, click “Recommended.” Windows will automatically find

the hardware drivers from the CD ROM.

Attention: If you are a Windows 2000 or Windows Me user, you must

have Direct X 8.1 installed in your system before installing the

Revolution software. Direct X 8.1 is included on the driver CD for

your convenience.

Step 3 - Connect the Speakers:

A typical system using the Revolution has between two and eight speakers.

Connect the Left, Right, Center, Subwoofer, Left Surround, and Right

Surround speakers to the jacks on the Revolution. You can connect an

additional two speakers for Left Center and Right Center Surround if you

have them.

Step 4 - Test your Installation:

Play a DVD or other surround movie to enjoy your new surround system.

Open the Revolution Control Panel to adjust the speaker settings. If your

current DVD player does not decode a surround sound signal, install

“WinDVD 4” from the included “Applications” CD.

II. Mac OS 9.2.2 Installation

Step 1 - Install the Card:

Shut your computer down and insert the Revolution PCI card into an

empty PCI slot. For specific instructions on how to do this, please refer to

the Revolution Manual, Hardware Setup section.

Attention: While Mac OS 8.6 meets the minimum system

requirements, we recommend OS 9.2.2 for optimal audio

performance with your Revolution card.

Step 2 - Open the M-Audio Revolution CD

Insert the Revolution CD ROM into your Macintosh CD ROM drive and

double-click on the Revolution CD icon that will appear on your desktop.

Step 3 - Open the Mac OS 9.2.2 folder

In the Revolution CD ROM window, double click on the Mac OS 9.2.2 folder.

Step 4 - Run the Installer

Double click on the Install Revolution application Icon and follow the

instructions on each screen.

Step 5 - Connect the Speakers

A typical system using the Revolution has between two and eight speakers.

Connect the Left, Right, Center, Subwoofer, Left Surround, and Right

Surround speakers to the jacks on the Revolution. You can connect an

additional two speakers for Left Center and Right Center Surround if you

have them.

Step 6 - Test your Installation

Play a DVD or other surround movie to enjoy your new surround system.

Open the Revolution control panel to activate Circle Surround II™ and

adjust the speaker settings.

III. Mac OS X Installation

Step 1 - Install the Card

Shut your computer down and insert the Revolution PCI card into an

empty PCI slot. For specific instructions on how to do this, please refer to

the Revolution Manual, Hardware Setup section.

Step 2 - Open the M-Audio Revolution CD

Insert the Revolution CD ROM into your Macintosh CD ROM drive and

double-click on the Revolution CD icon that will appear on your desktop.

Step 3 - Open the Mac OS X folder

In the Revolution CD ROM window, double click on the Mac OS X folder.

Step 4 - Run the Installer

Double click on the M-Audio Revolution Software.dmg file. A virtual disk

called M-Audio Revolution Software will open on your desktop. Double-

click on the M-Audio Revolution Software.mpkg and follow the instructions

on each screen.

Step 5 - Connect the Speakers

A typical system using the Revolution has between two and eight speakers.

Connect the Left, Right, Center, Subwoofer, Left Surround, and Right

Surround speakers to the jacks on the Revolution. You can connect an

additional two speakers for Left Center and Right Center Surround if you

have them.

Step 6 - Test your Installation

Play a DVD or other surround movie to enjoy your new surround system.

Open the Revolution control panel to activate Circle Surround II™ and

adjust the speaker settings.

Still need more info? Refer to the manual now, as it will

discuss the setup process in a lot greater detail.

For information on other M-Audio products, vist our website at

www.m-audio.com

Quick Start Guide

for the

Revolution 7.1

High-Definition Surround Sound Card

This guide is intended to help get you started quickly.

In order to achieve optimal usage of your new

soundcard we recommend that you carefully study the

enclosed product manual, either after completing the

process described in this guide or, if generally

unfamiliar with computer hardware installation.

™

01-07-03

Andere Handbücher für Revolution 7.1

Inhaltsverzeichnis

Andere M-Audio Soundkarte Handbücher

M-Audio

M-Audio AUDIOPHILE 192 Bedienungsanleitung

M-Audio

M-Audio Delta 410 Bedienungsanleitung

M-Audio

M-Audio Digital Recording Interface Delta 44 Bedienungsanleitung

M-Audio

M-Audio AUDIOPHILE 192 Bedienungsanleitung

M-Audio

M-Audio Delta TDIF Bedienungsanleitung

M-Audio

M-Audio Dman PCI Bedienungsanleitung

M-Audio

M-Audio C Series Bedienungsanleitung

M-Audio

M-Audio Digital Recording Interface Delta 44 Bedienungsanleitung

M-Audio

M-Audio AUDIOPHILE 192 Bedienungsanleitung

M-Audio

M-Audio Delta DiO-2448 Bedienungsanleitung

M-Audio

M-Audio Dman PCI Bedienungsanleitung

M-Audio

M-Audio DELTA 1010LT Bedienungsanleitung

M-Audio

M-Audio Delta R-BUS Bedienungsanleitung

M-Audio

M-Audio Dman 2044 Bedienungsanleitung

M-Audio

M-Audio Sonica Theater Bedienungsanleitung

M-Audio

M-Audio Revolution 7.1 Bedienungsanleitung

M-Audio

M-Audio Fast Track Ultra 8R Bedienungsanleitung

M-Audio

M-Audio AP-012403 Bedienungsanleitung

M-Audio

M-Audio AIR 192/6 Bedienungsanleitung

M-Audio

M-Audio Revolution 7.1 Bedienungsanleitung

M-Audio

M-Audio REVOLUTION 5.1 Bedienungsanleitung

Beliebte Soundkarte Handbücher anderer Marken

PCchips

PCchips CMI8330 Bedienungsanleitung

Creative

Creative Sound BlasterX G5 SB1700 Bedienungsanleitung

IBM

IBM Music Feature Card Bedienungsanleitung

Diamond Multimedia

Diamond Multimedia Xtreme Sound Bedienungsanleitung

Digigram

Digigram VX222v2 Bedienungsanleitung

Pure Speed

Pure Speed DSU6000 Bedienungsanleitung

Philips

Philips Seismic Edge PSC704 Bedienungsanleitung

ADDAC System

ADDAC System ADDAC604 Bedienungsanleitung

Asus

Asus Audio Card Xonar D2 Bedienungsanleitung

Soundwave

Soundwave 7.1 Bedienungsanleitung

Creative

Creative Sound Blaster Pro Bedienungsanleitung

Digigram

Digigram VX222-Mic Bedienungsanleitung

HRT

HRT LineStreamer+ Bedienungsanleitung

ST AEKD-STEREOAVAS Bedienungsanleitung

AuviTran

AuviTran AVY16-ES100 Bedienungsanleitung

Creative

Creative Sound BLASTER Audige Rx SB1550 Bedienungsanleitung

IQaudIO

IQaudIO PI-DAC+ Bedienungsanleitung

VideoLogic

VideoLogic SonicVortex2 Bedienungsanleitung