M Design LUNA GOLD+ COLLECTION Bedienungsanleitung

INSTRUCTION FOR INSTALLATION AND USE LUNA GOLD+ WOOD

LUNA GOLD+ COLLECTION

INSTRUCTION FOR INSTALLATION AND USE

Passion for fire

English - 08/2011

INSTRUCTION FOR INSTALLATION AND USE LUNA GOLD+ WOOD

V E R Y I M P O R T A N T

INSTALLATION

INSTRUCTIONS FOR THE

M - D E S I G N

GAS FIREPLACES

THE SUPPLIER TAKES NO

RESPONSBILITY FOR ANY

POSSIBLE DAMAGE, POOR WORKING

APPLIANCES AND ACCIDENT AS A

RESULT OF INCORRECT INSTALLATION

INSTRUCTION FOR INSTALLATION AND USE LUNA GOLD+ WOOD

SUMMARY

1. GENERAL.................................................................................... 4

1.1 TRANSPORT AND INSTALLATION............................... 4

1.2 TYPES OF FUEL ..................................................................... 4

1.2.1 Wood

1.2.2 Forbidden fuel

1.3 STARTING THE FIRE .......................................................... 5

2. INSTALLATION ........................................................................ 6

2.1 ACTIONS UPON INSTALLATION................................... 6

2.2 POSITIONING THE FIREPLACE...................................... 6

2.3 INSULATION AND FNISHING ........................................ 7

2.4 MOUNTING A 3-SIDED FRAME...................................... 8

2.5 AIR SUPPLY FOR COMBUSTION .................................... 9

2.6 CONVECTION CURRENT.................................................. 10

2.6.1 Natural convection............................................................

2.6.2 Convection generated by a fan (optional) .....................

2.6.3 Hot air ducts ......................................................................

2.7 FAN ........................................................................................... 12

2.7.1 Installation..........................................................................

2.7.2 Fan dimmer........................................................................

2.8 FLUE ......................................................................................... 13

2.8.1 Flue......................................................................................

2.9 HOW TO REGULATE FIREPLACE IN SENSE OF DROUGHT 14

2.9.1 Bae plate

2.9.1.1 First seng.................................................................... 14

2.9.1.2 Second seing.............................................................. 15

2.9.2 System with three deectors ............................................ 16

2.9.3 Secondary air ow for combustion ................................. 17

2.10 BAFFLE PLATE LUNA GOLD SEE-TROUGH .............. 18

3. FUNCTIONNING...................................................................... 19

4 GENERAL RECOMMENDATIONS....................................... 20

4.1 MAINTENANCE .................................................................... 20

4.1.1 Cleaning the window ....................................................... 20

5. GUARANTEE ............................................................................. 21

5.1 TERMS AND ITEMS COVERED ....................................... 21

5.2 PROVISO ................................................................................ 21

5.3 DISCLAIMER......................................................................... 21

6. SPARE PARTS ............................................................................ 22

7-8. 3 SIDED AND 4th FRAME ................................................... 23-24

INSTRUCTION FOR INSTALLATION AND USE LUNA GOLD+ WOOD

1. GENERAL

1.1 TRANSPORT AND INSTALLATION

• Transport the Luna in an upright position, or, in encumbering

circumstances, at an angle of 45°.

• The handles for transportation purposes have been aached

inside the slots provided on the sides of the Luna (see Pic.1)

• A set of rubber straps that can be turned and a set of xed

rubber straps are available as an option.

This is to facilitate transport on-site and on the stairs.

• Check to see that the lifting door functions properly before

ing the Luna GOLD (see Pic.2).

1.2 FUEL

1.2.1 Wood

The quality of the wood is extremely important for the optimal

functioning of the stove (output, clear glass, etc.).

Good quality wood is wood that has been dried under an aerated

shelter for at least 2 years (+ 18% moisture content). Damp wood

gives o less heat and dirties the stove and the chimney less.

You can also use briquees (the eect is comparable with that of

wood), and it is best to use them in combination with wood

because burning only briquees makes the temperature too

high.

Never ll the stove with wood because when the chimney draws

too much, it can make the temperature too high. Damage as a

result of excessive temperature is not under guarantee. 3 wooden

logs are equal to 12 kW.

1.2.2 Forbidden fuel

The use of treated wood (painted, etc.) and all types of household

waste, which can disperse hazardous gases, is FORBIDDEN and

CANCELS OUT ANY CLAIM ON THE GUARANTEE. The use

of uid fuel (petrol, etc.) is also forbidden.

Pic. 1

Pic. 2

INSTRUCTION FOR INSTALLATION AND USE LUNA GOLD+ WOOD

1.3 STARTING THE FIRE

• Open the window (pic.3).

• Put a bed of tinder (paper or relighters) with a lile kindling (small twigs or pieces of wood) in

the stove and light the tinder.

• Leave the door slightly ajar (+ 3 cm) to get a turbo stream of air that will make the kindling catch

re.

•After the kindling has caught re and burns well, the logs may be placed on the re. After the logs

have caught re, the window may be shut.

NOTE: When a re is made for the rst time, the paint will harden and that give o smoke

and a smell, which starts after the re has burned for about 10 minutes and lasts for about

15 minutes. See to it that there is ample ventilation in the room.

CAUTION :

It is not necessary to overload the replace with wood.

1 kg dry wood gives a 4 kW power.

Example : a replace with a 78% return gives a power for about 4kw x 78% = +/- 3 kW for 1 kg dry

wood.

If you want a power of +/-12 kW , it is just enough to put 4 kg wood in the replace. This is like

two normal pieces of wood.

Be carefull not to use palletwood (this gives an enormous heat) for continuous heating. This can

lead to re hazard. We are not responsible for the bad use of the replaces and any consequence

for not following this guideline.

pic. 3

INSTRUCTION FOR INSTALLATION AND USE LUNA GOLD+ WOOD

2. INSTALLATION

2.1 ACTIONS TO BE TAKEN UPON INSTALLATION

Your supplier is the specialist who chose to represent M-design in your area. For your own safety

and satisfaction, we advise you to entrust him with the installation. The appliance has to be

installed according to certain prescribed rules and local regulations.

In the absence of the correct regulations in Belgium, the French regulations in respect of

installation will be (D.T.U. 24.2.2) applicable.

However, if you decide to carry out the work on your own, we advise you to do the following:

• Refer to the terms and conditions of our contract of guarantee.

• Ask your supplier for advice.

pic. 1 pic. 2 pic. 3

A min = 3,5 cm

B = 14,5 cm

C min = 18 cm

2.2 POSITIONING THE FIREPLACE

Place the replace on a stable surface using the adjustable feet. Adjust the height of the replace

by turning the bolt ( pic 1 )

The stove may not be placed direct ont the oor to allow natural convection.

The appertures for the air supply ( IN ) is situated underneath the appliances.

Regulating the height of the appliance :

This can be made in two ways.

A regulation by 8 times 5 cm ( pic. 1 ) and a ne regulation by screw ( pic.2 ).

The minimal height as from ground to the 4th side frame is 3,5 cm ( A min ).

The minimal height “C min” will be 18 cm, measured as from the ground to 4th side frame ( pic.3 ).

The maximal height as from the ground to the 4th side frame is 45 cm.

INSTRUCTION FOR INSTALLATION AND USE LUNA GOLD+ WOOD

REFERENTIAL DISTANCES IN REGARDS TO FINISHING THE MANTLEPIECE

A very essential point when seing up the Luna Gold is that the distance has to be respected

inbetween replace and the nishing material for the mantlepiece such as marble, gipsum,...

For this, a small bended metal sheet that is provided ont the replace ( pic.1 ) , is to be used as the

minimal reference for the distance. The nishing can only ga oas far as this meteal sheet ( pic.2 ).

Don’t remove this ( pic.3 ) ! This allows you to take out the 4th side frame and to let the airow in

the mantlepiece for natural convection.

2.3 INSULATION AND FINISHING

Once installation is complete, the appliance can be ed. Once you have checked everything, you

can perform the nal insulating and nishing operations.

The built-in part of the furnace tends to be very warm. Please check that the furnace is not too

narrowly ed and that there is adequate space for the elimination of hot air. For insulation of the

furnace, we advise you to use M Design insulating plates. You are advised against using any other

insulation product. Inammable materials as well may not be used for the nishing.

Please , follow this instruction. The appliance can overheat if you not apply those in-

structions.

Pic. 2 Pic. 3

min. 5 mm

The masonry must be raised around the furnace. Because of the expansion

of the furnace during combustion, an interstice of at least 5 mm must be

provided on each side of the appliance. The masonry must not lean against

the furnace.

THE APPLIANCE MUST BE SET FREE .

Please pay aention to leave approx. 2 mm inbetween the nishing frame

and maconry ( see p.17 , mounting a 3-sided frame )

Pic. 1

INSTRUCTION FOR INSTALLATION AND USE LUNA GOLD+ WOOD

2.4 MOUNTING A 3-SIDED FRAME ( see page 23 and 24 drawings 3-si-

ded frame and 4th side )

First remove the prole that is delivered with the replace ( pic. 1 )

The 3 sided frame consist of 3 parts and are assembled to the Luna ( pic. 2 )

the 3 sides frame and his 3 parts

Fixing to frame with the included screws ( pic.3 )

PLEASE PAY ATTENTION TO LEAVE APPROX 2 MM INBETWEEN THE FRAME

AND THE FINISHING MATERIAL ( HEAT = EXPANSION)

pic.1 pic.2

pic.3

Example :

Finished size of the Luna 1150H+ Gold is 450 x 1080 mm

Thickness 3-sided frame : 3mm

Calculate as follow : 1080mm + 2x3mm ( 3-sided frame ) + 2x2mm ( expansion ) = 1090 mm.

This is now the measurement you need to have when using a 3-sided frame in combination with

marble, gyproc, or othet materials.

For the height you start calculate from just underneath the 4-sided frame to the top of the

3-sided frame : this is 450mm. For the nishing measurement calculate 450mm + 2mm.

INSTRUCTION FOR INSTALLATION AND USE LUNA GOLD+ WOOD

2.5 AIR SUPPLY FOR COMBUSTION

Every form of combustion uses air. In the case of a thermally sealed room supplementary air supply

is essential. One must at all times avoid creating under-pressure in the room. If a cooking hood ap-

pears to be absolutely essential in the adjoining room, sucient

air supply will have to be provided to avoid every form of under-pressure.

You need an airlet with dia. 150mm coming from outisde, or a ventilated shelter. This airinlet you

have to connect to the Luna.

For a double sided LUNA and the LUNA 1000V+ and 1150V+ ,

you need two air inlets dia. 150mm.

With the Luna Gold+, the fresh air for combustion is supplied directly from outside through a

exible ( dia. 150mm ) that is connected to one of the 4 entrances that are provided on the left,

right or lower side of the replace ( pic. 4 & 5 ) . Use for this purpose one of ve connection

pieces ( pic. 6 & 7 )

Thanks to this new system, the air that is required for combustion is completely separated from

the convection air stream in the room ( see further at point 2.3. Convection current ).

The appliance is always delivered with an open air inleet at the left side. If you want to change,

you can remove the plate on the side you wish to connect en replace the plate on the side that was

open before.

pic. 5

pic. 4

pic. 6

pic. 7

FRESH AIR INLETS FROM OUTSIDE

NEEDED FOR COMBUSTION

ø150

Luna Gold 700 H+ 1 x ø150

Luna Gold 850 H+ 1 x ø150

Luna Gold 1000 H+ 1 x ø150

Luna Gold 1150 H+ 1 x ø150

Luna Gold 1300 H+ 1 x ø150

Luna Gold 550 V+ 1 x ø150

Luna Gold 850 V+ 1 x ø150

Luna Gold 1000 V+ 2 x ø150

Luna Gold 1150 V+ 2 x ø150

Luna Gold 1150 DH+ 2 x ø150

Luna Gold 1000 DV+ 2 x ø150

Luna Gold 850 DH+ 2 x ø150

Luna Gold 850 DV+ 2 x ø150

INSTRUCTION FOR INSTALLATION AND USE LUNA GOLD+ WOOD

Tabel N°1. Warm air outlet

with fan without fan

Luna Gold 700 H 2 2

Luna Gold 850 H 2 2

Luna Gold 1000H 2 4

Luna Gold 1150 H 2 4

Luna Gold 1300 H 2 4

Luna Gold 550 V 2 2

Luna Gold 850 V 2 4

Luna Gold 1000V / 1150V 2 4

Luna Gold 850 DV / DH 2

Luna Gold 1150 DH 2

Luna Gold 1000DV 2

2.6 CONVECTION CURRENT

2.6.1 Natural convection

It is compulsory to open 2 or 4 hot air vents (see table 1) at the

top of the appliance. The entrance for the air supply convection are situated

at the lower backside of the Luna Gold+ and also through the opening that is

provided for the fan. These have been constructed in such a way that no air can

be blown out along here, not even with a fan. The stove is placed at least 20 mm

above the oor (if placed on the oor) to allow for natural convection.

A clearance of at least 4 dm3 , excluding the measurements of a dust lter, or at

least 6 dm3 , including the measurements of a lter, must be provided for in the

masonry. (Note: Remember to take the measurements of the clearance of the

grids into account.) (Pic.7a)

2.6.2 Convection by means of a fan (optional)

It is compulsory to open at least 2 hot air vents (see table 1). It is essential to

separate the air supply ducts and the air vents correctly in the masonry. Some

insulation material gets damaged in time, and it is essential to separate it from

the ventilation air supply, otherwise one runs the risk that it is sucked in and

spread in the house. It is therefore also advisable to use xed insulation plates

(Promatec, HT-platen or promatec). The fan may be mounted either on the out-

side or on the inside, which even makes it possible to install a fan afterwards.

2.6.3 Hot air ducts

Thermally insulated ducts are essential for the optimal functioning of the ap-

pliance (these cause ‘draught’ in the convection air current). By using the maxi-

mum number of ducts (at least 2), the output is improved and the noise (that is

caused by the displacement) is reduced.

For the purposes of the installation of these ducts it is best to go vertically up-

wards rst for at least 1m and then to change direction, making a rather wide

bend and avoid using a ue terminal grid with a small clearance because the

speed loss that this causes reduces the eciency of the hot air vents.

M-design has developed its ideal hot air grids which have many advantages

(Pic 7b and 7c) Pic. 7b

Entrance convection

air ( at backside )

Pic. 7a

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere M Design Kamin im Innenbereich Handbücher

M Design

M Design INTERRA 60 Bedienungsanleitung

M Design

M Design LUNA GOLD 800DC Leitfaden

M Design

M Design LUNA 850 V Gold Gas Bedienungs- und Wartungshandbuch

M Design

M Design Luna Diamond Series Bedienungsanleitung

M Design

M Design VENUS GREEN PLUS 700 Bedienungsanleitung

M Design

M Design Luna Gold Series Bedienungsanleitung

M Design

M Design Luna Diamond Series Bedienungsanleitung

M Design

M Design luna diamond 550 v Bedienungsanleitung

M Design

M Design VENUS GREEN PLUS Series Bedienungsanleitung

M Design

M Design Venus True Vision Series Bedienungsanleitung

M Design

M Design DIAMOND Gas 550V Bedienungsanleitung

M Design

M Design RD 750 Bedienungsanleitung

M Design

M Design Luna Gold 700 H+ Bedienungsanleitung

M Design

M Design LUNA DIAMOND 100DH Bedienungsanleitung

M Design

M Design True Vision 1000 RD Bedienungsanleitung

M Design

M Design ARGENTO H Series Bedienungsanleitung

M Design

M Design True Vision Series Bedienungsanleitung

M Design

M Design VENUS Bedienungsanleitung

M Design

M Design LUNA 700H Bedienungsanleitung

M Design

M Design LUNA 1000 DH Gold Gas Bedienungsanleitung

M Design

M Design VENUS GREEN PLUS Series Bedienungsanleitung

M Design

M Design Luna Diamond Series Bedienungsanleitung

M Design

M Design LUNA 850 V Gold Gas Bedienungsanleitung

M Design

M Design LUNA1300 RD GOLD GAS Bedienungsanleitung

Beliebte Kamin im Innenbereich Handbücher anderer Marken

Brigantia

Brigantia 35-DVRS31N-2 Betriebsanleitung

Nordpeis

Nordpeis Bergen Bedienungsanleitung

Superior

Superior BCT2536TMN Bedienungsanleitung

Quadra-Fire

Quadra-Fire 5100I-GD-B Bedienungsanleitung

Renaissance

Renaissance RUMFORD 1000 Bedienungsanleitung

Lacunza

Lacunza IV-800 Bedienungsanleitung

Baxi

Baxi 940 Gebrauchsanweisung

Dru

Dru Maestro 60/2 Tall RCH Bedienungsanleitung

Diamond Fireglass

Diamond Fireglass SS-O22 Bedienungsanleitung

HearthStone

HearthStone Windsor Bay 8830 Programmierhandbuch

Napoleon

Napoleon ASCENT B42 Bedienungsanleitung

Enviro

Enviro E33GI Bedienungsanleitung

Smeg

Smeg L30 FABE Montageanleitung

KEDDY

KEDDY K700 Bedienungsanleitung

Godin

Godin 3451 Bedienungsanleitung

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Bedienungsanleitung

Desa

Desa CCFPDFT Bedienungsanleitung

Miles Industries

Miles Industries Vogue 1300IRN Handbuch