5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
EM-7459 Rev.3 P. 1 / 5
INSTRUCTION MANUAL
BEFORE USE ....
Thank you for choosing M-System. Before use, please check contents of the package you received as outlined below.
If you have any problems or questions with the product, please contact M-System’s Sales Office or representatives.
■PACKAGE INCLUDES:
MODEL NO.
PACKING LIST
A-34 A-34/26 A-34/27 A-34/6DV A-34/266 A-34/276
DIN rail mounting
adaptor W45 × H75 × D11 mm, 1 pc.
Screw M4 × 35, 2 pcs. M4 × 25, 2 pcs. M4 × 20, 2 pcs. M4 × 16, 2 pcs.
Nut M4, 2 pcs.
Spring washer M4, 2 pcs.
Spacer ---- Space 14.5 mm
2 pcs.
Space 12 mm
2 pcs.
Space 15 mm
2 pcs.
Wire ----
Pin connector /
Pin connector
150 mm, 1 pc.
Pin connector /
Spade tongue
150 mm, 1 pc.
■MODEL NO.
Confirm Model No. marking on the product to be exactly what you ordered.
■INSTRUCTION MANUAL
This manual describes necessary points of caution when you use this product.
POINTS OF CAUTION
■GENERAL PRECAUTIONS
• Before you install or remove this adaptor, turn off the
power supply and input signal to the adapted device for
safety.
■ENVIRONMENT
• Indoor use.
• When heavy dust or metal particles are present in the air,
install the product inside a proper housing with sufficient
ventilation.
• Do not install the product where it is subjected to continu-
ous vibration. Do not subject the unit to physical impact.
• Environmental temperature must be within -40 to +85°C
(-40 to +185°F; limited within the range described for the
adapted device) with relative humidity within 0 to 90%
RH in order to ensure adequate life span and operation.
DIN RAIL MOUNTING ADAPTER MODEL A-34
