MachPower WL-ICNAP24-053 Bedienungsanleitung

IN CEILING ACCESS POINT 300MBPS

WL-ICNAP24-053

USER MANUAL

REV.1216

Thanks

for choosed our product

___________________________________________________________________

INDEX

CHAPTER 1 Hardware Introduce and Power

1.1 Interface Description

1.2 Powered by PoE Adapter

1.3 Powered by PoE Switch

CHAPTER 2 Run and Login

CHAPTER 3 Operation Mode Setting

CHAPTER 4 System Tools and Advanced Settings

4.1 System tools

4.2 Advanced Settings

4.3 Operation Mode

4.4 Wireless

CHAPTER 5 Management

5.1 System

5.2 User

5.3 Log

5.4 Upgrade ﬁrmware

5.5 System Time

CHAPTER 1

HARDWARE INTRODUCE AND POWER

1.1 Interface Description

1.2 Powered by PoE Adapter

The connection diagram showed as P2, internet cable connect to PoE

adapter’s LAN Port, Ceiling AP’s RJ45 port connect to PoE adapter’s PoE

Port, then PC will access into ceiling AP through wireless.

1.3 Powered by PoE Switch

The connection diagram shows as P3, Internet cable from PoE Switch to

Ceiling AP’s WAN Port, then PC access into ceiling AP wired/wireless.

Pls note, the PoE switch should be 24V Passive PoE, can supply power

together with data transmission.

Gateway AP Controller PoE Switch

internet

CHAPTER 2

RUN AND LOGIN

1. Power this in wall AP in right way

2. Set an IP address for your PC: this Wireless Access Point default

IP is 192.168.0.254, conﬁgure local IP address as 192.168.0.X(X can be

selected from 1-253), the same network segment as this access point,

subnet mask is 255.255.255.0

3. Connect Wireless Access Point with PC by Wireless

Pls note, then the default SSID is MachPower2.4, default passwords

are 12345678.

4. Log in: Type 192.168.0.1 in your IE, will pop up following picture, pls

input admin/admin in User name/Password to Log into this in wall AP

CHAPTER 3

OPERATION MODE SETTING

Let’s show how to set it from Quick Setup

1. Log into 192.168.0.254 in your Internet Explorer and input user name/

Passwords, following device status will be showed, including LAN IP

address, AP’s MAC, Wireless Conﬁguration, channel.

Please note:

• If signal strength “ ” show blue, mean work ﬁne.

• if signal strength “ ” show red, should be some problem.

From this page, can see there are Internet Settings, Wireless Repeater,

Wireless Coverage operation mode, user can choose the right operation

mode based on needs.

A. Internet Setting: In this mode, the device is supposed to connect to

internet via ADSL/Cable Modem. The NAT is enabled and PCs in LAN

ports share the same IP to ISP through WAN port. Then connection type

can be setup in WAN page by using PPPoE, Diynamic IP or Static IP.

Click Internet Settings, then will see following page, pls choose dyna-

mic IP or PPPOE based on your networking, then input the user name,

passwords in PPPOE part, after that can change the SSID, Channel, Key

as you like, then apply.

B. Wireless Repeater: In this mode, the in wall AP will extend the exist

wireless networking signal for more range after bridge it SSID and all

interfaces. Without NAT, ﬁrewall and all network related functions.

Click Wireless Repeater, then will see following page:

Then scan AP, choose AP, input AP’s passwords to ﬁnish the connection

setting

If you want to change this device’s SSID, channel, Key, then set it from

Wireless Part in P10. After that, then apply.

C. AP Mode: in this mode, LAN internet is from the top gateway to

Switch, then to in wall AP, the wired networking will change to Wireless

network and DHCP disable via this operation mode.

Click wireless coverage, then will appear following page, change the

SSID, Key, Channel as you like, then apply.

After ﬁnish the setting, then cancel the IP address you setted for your

PC, then the internet setting is ﬁnished.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere MachPower Drahtloser Zugangspunkt Handbücher

MachPower

MachPower WL-IWNAP48-062 Bedienungsanleitung

MachPower

MachPower WL-ICNAP48F-060 Bedienungsanleitung

MachPower

MachPower WL-ICNAP24-074 Bedienungsanleitung

MachPower

MachPower WL-ICDBG24-051 Bedienungsanleitung

MachPower

MachPower WL-APODB48-056 Bedienungsanleitung

MachPower

MachPower WL-ICDBG24-073 Bedienungsanleitung

MachPower

MachPower WL-CPE5G24-064 Bedienungsanleitung

MachPower

MachPower WL-CPE2G24-065 Bedienungsanleitung

MachPower

MachPower WL-APO2G24-061 Bedienungsanleitung

MachPower

MachPower WL-CPE5G24-063 Bedienungsanleitung

MachPower

MachPower WL-CPE5G48-058 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung