Macrom 3.5 Bedienungsanleitung
2
CONTENTS
INTRODUCTION ............................................................................................................ 3
PRECAUTIONS AND INSTRUCTIONS.............................................................................. 3
REGISTERED TRADEMARKS ......................................................................................... 4
BEFORE STARTING........................................................................................................ 5
NAVIGATOR CONTROLS............................................................................................... 5
USE OF THE NAVIGATOR............................................................................................. 6
MEMORY CARDS......................................................................................................... 7
GETTING STARTED........................................................................................................ 9
MAIN FUNCTIONS........................................................................................................ 12
SOFTWARE INSTALLATION AND ACTIVATION .................................................................16
INSTALLATION PROCEDURE....................................................................................... 16
ACTIVATION PROCEDURE.......................................................................................... 16
TROUBLESHOOTING AND MAINTENANCE ....................................................................... 17
TROUBLESHOOTING .................................................................................................17
MAINTENANCE ......................................................................................................... 18
SAFETY INSTRUCTIONS ............................................................................................... 19
CONFORMITY TO EUROPEAN UNION REGULATIONS......................................................... 19
3
INTRODUCTION
Dear Customer, thank you for choosing a MACROM portable GPS navigator. Your MACROM GPS
navigator has been designed and constructed with the greatest care and attention; for this
reason, we advise you to read carefully the instructions in the following pages to keep the
navigator safe and in its original working order.
PRECAUTIONS AND INSTRUCTIONS
§The navigator is not waterproof.
§Do not leave the navigator on the dashboard exposed to sunlight; overheating of the
battery may cause malfunction and permanent damage.
§Use the navigator with care: do not operate the controls of the navigator while driving.
§The GPS navigator is an instrument to aid navigation; therefore it does not give precise
measurements of direction, distance, position or topography.
§The route calculated by the navigator is only intended for reference, and does not
exempt the driver of the vehicle from observing road signs or the highway code.
§The GPS (Global Positioning System) is a system operated by the government of the
United States, which has sole responsibility for its functioning. Any modification to the
GPS may therefore affect the functioning of the navigator.
§The signals from GPS satellites are attenuated when they pass through solid materials;
consequently, the navigator will not function correctly inside tunnels, underground car
parks, buildings or in vehicles with screened windows.
§The navigator must receive signals from the GPS satellites in order to determine its
position. Signal reception may be affected by specific situations like the presence of
physical obstacles (e.g. trees or very high buildings) or bad weather.
§Devices operating at radio frequencies may interfere with reception of signals from GPS
satellites or cause unstable reception.
§To use the navigator in a car you are advised to utilise the suction support supplied,
which must be positioned according to the instructions shown in the figure below.
4
REGISTERED TRADEMARKS
All the registered trademarks and brand names appearing in this manual are, without
limitation, within the bounds of international law on registered trademarks and belong to their
respective owners. All trademarks, trade names, or names of companies appearing in this
manual are or could be registered trademarks or trade names and hence the property of a
company. All rights which have not been explicitly agreed are reserved. If the respective
distinguishing marks for trade names and trademarks appearing in this manual are missing
then it should not be supposed that the trademarks are not registered or free from rights of
third parties.
Windows is a trademark of the Microsoft Corporation©.
Note
LCT Infotelematics pursues a policy of continuous improvement in its product development:
data and information found in the manual could be modified at any time without warning. For
updates and changes to this manual and the maps, the User should refer to
www.macromgps.com. This document contains information which is covered by intellectual and
industrial property rights of LCT Infotelematics and/or third parties. All reproduction of this
document, or part of it, for any purpose, is prohibited. It is also prohibited to transmit or send
or photocopy or record this document by any means, electronic or mechanical. LCT
Infotelematics does not guarantee the accuracy of the map data contained in this product and
declines all explicit, implicit or legal responsibility.
5
BEFORE STARTING
NAVIGATOR CONTROLS
FRONT PANEL
(1) Mute button: to activate or deactivate
the navigator’s sound quickly.
(2) Zoom buttons +/-: to change the zoom
level of the map.
(3) Perspective button: to change the way
you see the map.
(4) Touch Screen: touch the screen to select
commands and enter text.
(5) ON/OFF button: to turn the navigator on
and off.
(6) LED charge indicator: the light is red
when charging and green when charging is
complete.
REAR PANEL
(1) Aerial connector: connector for an
external GPS aerial.
(2) Loudspeaker
(3) Guide: to fix the navigator to the suction
support.
(4) Reset button: to restore the navigator’s
functions if there is a fault.
TOP PANEL
(1) Slot for SD memory cards: socket for
SD (Secure Digital) memory cards.
1
2
3
2
4
5
6
1
2
3
4
1
6
LOWER PANEL
(1) Power connector: to connect the
supplied AC mains (AC adapter) or car charger.
(2) Mini-USB port: to connect to a computer
using the supplied USB cable.
(3) Audio connector: to connect stereo
headphones.
LEFT PANEL
(1) Battery switch: to disconnect the internal
battery and preserve the charge if the device is
not going to be used for a long period.
USE OF THE NAVIGATOR
A suction support and car charger are included with your navigator. Fix the navigator on the
windscreen, choosing the position carefully so as not to obstruct road visibility and cause
danger. See the figure below.
1
2
3
1
7
To fix the suction support, place the sucker on the
windscreen and press the lever, making sure that
the seal is secure.
Then insert the navigator into the support.
To connect the charger, insert the terminal (1)
into the connector on the navigator and terminal
(2) into the car’s cigar lighter socket.
Note
While in use, the car charger functions as a supply
for the navigator and as a battery charger.
Recharging is quicker when the navigator is turned
off.
CAUTION: to protect the navigator from voltage
surges, we recommend you connect the car
charger only after starting the engine.
MEMORY CARDS
In the top panel of the navigator you will find a
slot into which you can insert SD (Secure Digital)
memory cards.
The navigator is supplied with an SD card
containing navigation software and maps already
installed and activated.
Remember that the SD card must be inserted in
the slot in order for the navigator to work and
must not be removed during use.
IMPORTANT: The memory card must be inserted in the slot with the label facing towards the
rear of the navigator.
If it is necessary to remove the card, close all applications and turn off the navigator, then
remove it from the socket by pressing lightly on the edge.
8
Before inserting a new card, make sure the slot does not contain dust or extraneous objects.
Keep the card in a safe place when not in use, avoiding exposure to dust and humidity. In
order to avoid possible malfunctioning of the navigation software, we suggest that you do not
save images or sound files on the SD supplied with the navigator. If the supplied SD is
replaced with a new one, the navigation software must be re-installed using the CD/DVD
supplied with the navigator. For more detailed instructions on installation, refer to the chapter
SOFTWARE INSTALLATION AND ACTIVATION.
9
GETTING STARTED
Move the battery switch to the ON position and
press the power button. The navigator starts and
the Main Menu appears on the screen.
The upper bar of the Main Menu shows:
§The audio volume
§Date and time
§Battery charge level
The icons in the Main Menu represent the available
functions: Navigator, Photo, MP3, Video, Calculator
and Setup.
To open the Setup Menu, press the Setup button
on the Main Menu.
The Setup page allows you to adjust the sound
volume, set the language and calibrate the screen.
10
Press Clock to set the correct time zone, the date
and the current time.
Having made the necessary changes, press OK to
confirm.
Press the Volume button.
Adjust the volume to the desired level by tapping
the + and –keys.
Press OK to confirm and return to the Setup Menu.
Press the Language key to set the system
language.
After selecting the language by pressing the
arrows, select OK.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Macrom GPS Handbücher
Macrom
Macrom M-DVD6560 Bedienungsanleitung
Macrom
Macrom M-DL7000D Bedienungsanleitung
Macrom
Macrom M-DVD4000 Bedienungsanleitung
Macrom
Macrom M-DVD6000DAB Bedienungsanleitung
Macrom
Macrom M-DL6000 Bedienungsanleitung
Macrom
Macrom M-DVD6000L Bedienungsanleitung
Macrom
Macrom M-DL4000 Bedienungsanleitung
Macrom
Macrom Portable GPS Navigator Bedienungsanleitung
Macrom
Macrom M-DL9000 Bedienungsanleitung
Macrom
Macrom M-DVD5566 Bedienungsanleitung
