Magnum Ui5 Bedienungsanleitung
USER GUIDE
PLEASE READ ME FIRST! English
!
Table of contents
1. Your E-Bike…………………………………………………………………3—4
1.1 Introduction
1.2 General presentation of the vehicle
2. Function Display …………………………………………………………5—9
2.1 Function summary
2.2 Full view area
2.3 Normal view area
2.4 Normal operation
3. Using the bike……………………………………………………………9—12
3.1 Riding the bike
3.2 Quick-release devices
3.3 how to adjust the saddle height to suit the rider
3.4 Precautions required prior to each use
3.5 Lubrication
3.6 Routine maintenance.
4. The battery………………………………………………………..………13—14
4.1 Installing and removing the battery
4.2 Charging the battery
4.3 Battery autonomy and lifespan
4.4 Battery safety instructions
5. Safety maintenance and recommendations………………….….…14—16
5.1 Safety recommendation
5.2 Maintenance
6. Accessories………………………………………………………………….…16
7. Warranty ……………………………………………………………………..…16
!2
!
1.Your E-Bike
1.1 Introduction
We would like to thank you for your e-bike purchasing. The e-bike, equipped with
pedals and an auxiliary electric motor, cannot be propelled exclusively by means of
this auxiliary electric motor. You will thoroughly enjoy riding this new and electrical
power- assisted bike.
Riding an e-bike means that you’re helping preserve the environment, since any CO2
or other polluting gases will not be released. For your safety and for the safety of
others, we recommend that you obey all road regulations and wear a protective
helmet. For optimal, safe and enjoyable use of the e-bike, make sure you thoroughly
read this user guide before you first use it.
Use the e-bike according to the user guide,or it may shorten the life cycle.
Have a pleasant ride!
1.2 General presentationof the vehicle
1.2.1 General information
Weight of bike without battery: 25KG
Maximum assistance speed: 25KM/H
The dimensions of the bike (MM): L 1750 x W230 x H980 (95% package)
Maximum total weight: 120KG (includes the bike, battery andrider)
!3
!
1.2.2 Spare parts spec
** Charging time: 3-6 hours for 100% charge
** Autonomy: between 40 to 100 KM, depending on the assistance level and road
condition.
** 2 charge indicators: 1 is located on the display; 1 is located on the side of battery.
** Weight: 3 KG
Spare parts name
UI5
Motor
Das-Kit, 36V250W, Rear drive motor
Battery
36V13AH SAMSUNG CELLS, with USB port
Display
Das-Kit, C4B : LCD, 6 Levels, Error code report
Front fork
SUNTOUR, NEX
E-Brake Lever
ARTEK
Disc Brake
TEKTRO Disc Brake
Derailleur
SHIMANO ,Altus, 7 Speed
Tires
SCHWALBE, Smart Sam 27.5*2.25
!4
!
2. Function Display
2 .1 FUNCTION SUMMARY
The indicated contents are as below.
!5
!
2.2 FULL VIEW AREA
!
2.3 NORMAL VIEW AREA
The normal viewing area of the C300 is shown below. Press SET to switch the
displaying information. The order is: ODO →Riding Distance →Riding Time →Max
Speed.
!
2.4 NORMAL OPERATION
1、ON/OFF
Hold ON/OFF and start the display. The display will provide power for the controller.
Hold ON/OFF again can open the backlight. With display on, press ON/OFF for 3
seconds to turn off the power. With the display off, there is no battery consumption.
The leakage current is no more than 2 µA.
※The panel will go to sleep when speed is 0 km/h for 5 minutes.
2、CURRENT DISPLAY
That represents the discharging current of the controller currently, each segment is
2A, six segments is >=12A.
!
!6
!
3 、SPEED DISPLAY
It displays the current riding speed of e-bike. The speed display is as below.
!
4、KM/H & MPH
Select KM/H or MPH for the speed and mileage, display will be the currently selected
units display.
5、BACKLIGHT INDICATOR
With the power on, click the ON/OFF and turn on the backlight. Click it again and turn
off the backlight.
6、6 KM/H WORK
Hold UP for 2 seconds and enter into the mode of power assist walk. The e-bike is
traveling at 6Km/h.
7、ASSIST LEVEL SELECTION
Click UP or DOWN to change the stages and output power ratio, the output power
cycle from level 0 to level 6 for the default (the levels can be customized by user) ,
the default value is level 1.
!
8、SET OPEARATION
8.1 Reset ODO
Hold UP and DOWN for 12 seconds to clear the ODO.
!ODO
8.2 Reset trip distance and max speed
Hold DOWN for 2 seconds to clear trip distance, trip time and max speed.
!trip distance !trip time !max speed
max speed
8.3 Wheel diameter setting
Hold SET for 10 seconds to enter into wheel diameter setting. Select the accurate
wheel diameter value to ensure the accuracy of display about speed and mileage.
!7
!
!
※Click UP or DOWN to set the wheel diameter.
8.4 Throttle speed setting
Hold UP and SET for 5 seconds to enter into the throttle speed setting interface.
Click UP or DOWN to set the throttle speed limited or not, the limited throttle speed is
6km/h.
8.5 KM/H & MPH
Hold DOWN for 9 seconds to switch from KM/H and MPH.
!!
9、DISTANCE INDICATOR
With the display on, press SET to switch the display information. In turn shows ODO
and trip distance.
9.1 ODO
The ODO records the driving mileage from using.
!
9.2 Trip distance
Trip distance records the driving mileage, it displays as below.
!
10、TRIP TIME INDICATOR
The trip time records the riding time, it displays as below.
!8
!
!
11、BATTERY INDICATOR
When the battery capacity is high, the six battery segments are all light. When the
battery is low, the battery frame will flash. It indicates that the battery is severely low
and needs to be recharged immediately.
!!!!!
!!Low battery flash
3. Using the bike
3.1 Riding the bike
Before taking off, make sure that you
activatethe battery by pressing on the
button locatedon the side of battery.
The 4LEDs located on the side of
the battery which indicate the charge level.
Turn on the display unit which is on the
handlebars. Select your neededassistance
level and start to pedal. You’ll find that the
engine starts as soon as you start
pedaling.
When you use the brakes, the contactor
located within these brakes will halt the
engine’s assistance immediately.
The left brakelever controls the rearbrake. Theright brake lever controls the front
brake.
You can also use the bike withoutelectric assistance by turning off the battery (switch
off the buttonor by adjusting the assistance level on 0). The enginewill then feature
zero resistance: you’ll be freewheeling. Select the appropriate gearby activating the
7-speed gear lever.
!9
!
3.2 Quick-release devices
Tighten the adjusting nut by hand and move the quick release lever to the closed
position. You should feel considerable resistance while moving the lever. If not, re-
open and re-tighten the lever, then move it to the closed position so it is in line with
the frame.
3.3 how to adjust the saddle height to suit the rider
!10
Andere Handbücher für Ui5
1
Inhaltsverzeichnis
Andere Magnum Fahrrad Handbücher
Magnum
Magnum METRO Bedienungsanleitung
Magnum
Magnum Pathfinder Gebrauchsanweisung
Magnum
Magnum PEAK Bedienungsanleitung
Magnum
Magnum Classic Bedienungsanleitung
Magnum
Magnum Ui5 Bedienungsanleitung
Magnum
Magnum Navigator Bedienungsanleitung
Magnum
Magnum Low Rider Bedienungsanleitung
Magnum
Magnum METRO Bedienungsanleitung
Magnum
Magnum Nomad Bedienungsanleitung
Magnum
Magnum Pathfinder 500 Bedienungsanleitung
Magnum
Magnum Pathfinder T Bedienungsanleitung
Magnum
Magnum Peak T5 Bedienungsanleitung
Magnum
Magnum Pathfinder 350 Bedienungsanleitung
Magnum
Magnum Payload Bedienungsanleitung
Magnum
Magnum Ranger Bedienungsanleitung
Magnum
Magnum Scout Bedienungsanleitung
Magnum
Magnum Cosmopolitan Bedienungsanleitung
Magnum
Magnum Peak T5 Bedienungsanleitung
Magnum
Magnum Cosmo X Bedienungsanleitung
