Mainstays GSB3321019-3 Bedienungsanleitung

MAINSTAYS

Industrial 4 Drawer Dresser

Stock # GSB3321019-3

20-25minutes

approx assembly time

Two adults

Assembly required

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

For assistance with assembly or installation, parts and customer

service , call 1-888-568-3818 Monday-Friday 8:30am-5:30pm

PST (U.S)

Email: customerservice.s@goldenspecies.com

Working hour: Mon.-Fri., 8:30am - 5:30pm Pacific Standard

Time.

Stock # GSB3321019-3

Lot Number : _________

Date Purchased ______/____/_____

Manufactured By : Young Chain Company Limited

Binh Duong Province, Vietnam

TEL : 1-888-568-3818

EMAIL : customerservice.s@goldenspecies.com

We are available to assist you Monday-Friday

From 8:30am-5:30pm PST (US)

MAXIMUM LOAD 44 LB (20 KG)

DRAWER MAXIMUM LOAD

10 LBS (4.54 KG)

Review your purchases, thank you!

Share your feedback to help other shoppers

Link for this product is as below:

www.walmart.com/ip/715597902

MAINSTAYS

Industrial 4 Drawer Dresser

Stock # GSB3321019-3

Manufactured By : Young Chain Company Limited

Binh Duong Province, Vietnam

TEL : 1-888-568-3818

EMAIL : customerservice.s@goldenspecies.com

We are available to assist you Monday-Friday

From 8:30am-5:30pm PST (US)

Important Safety Information

Please read all instructions carefully before assembling this furniture.

For your safety, assembly by two or more adults is strongly recommended.

Use only vendor-supplied hardware to assemble this item. Using unauthorized hardware

could jeopardize the structural integrity of the item.

Hardware may loosen overtime. Periodically check that all connections are tight.

NOTICE: To prevent injury and property damage from unexpected tipping of furniture, we highly

recommend installation of the anti-tip kit included with this product.

General Information, Tips & Tricks

Remove all parts and hardware from the box. Place all items on a carpeted or scratch-free work

surface, as this will avoid damaging parts during assembly.

The shipping box provides an ideal work surface.

To avoid accidentally discarding small parts or hardware, do not dispose of any packaging or

contents of the shipping carton until assembly is complete.

Use the parts and hardware lists below to identify and separate each of the pieces included.

The use of power tools for assembly is not recommended. Power tools can damage the hardware

and/or split the wood

Note: Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may

cause the bolts to misalign during assembly.

Safety and care

It is advisable to dust frequently with a clean, soft, dry, lint-free cloth. Clean the surface by

rubbing in the direction of the grain.

Do not place furniture in direct sunlight and keep furniture at least 60 cm / 2 ft from heat

sources to avoid fading.

DO NOT USE POWER DRILL / DRIVERS FOR INSERTING

SCREWS / BOLTS AS THIS COULD DAMAGE THE UNIT.

ONLY USE HAND SCREWDRIVERS.

Help and support

For assistance with assembly or installation, parts and customer service ,

call 1-888-568-3818 Monday-Friday 8:30am-5:30pm PST (U.S)

Email: customerservice.s@goldenspecies.com

Working hour: Mon.-Fri., 8:30am - 5:30pm Pacific Standard Time.

PARTS

ATOP

×1

BBASE

×1

C D

E F G H

IJK L

SIDE PANEL

×2

BACK PANEL

×1

MIDDLE BAR

×1

SIDE METAL

FRAME ×2

CROSS BAR

×2

DRAWER FRONT

PANEL ×4

DRAWER LEFT

PANEL ×4

DRAWER RIGHT

PANEL ×4

DRAWER BACK

PANEL ×4

DRAWER BOTTOM

PANEL ×4

SUPPORT BAR

×4

VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING Page 3

CAM LOCK

×46+1

CAM BOLT

×46+1

DOWEL

×20+1

BUCKLE

×8

FLAT HEAD

SCREW ×24+1

ROUND HEAD

SCREW ×16+1

STICKER PVC

×16+1

HANDLE

×4

ALLEN WRENCH

×1

SMALL BOLT

×8

SHORT BOLT

×8+1

SPRING WASHER

×20+1

LONG BOLT

×12+1

FLAT WASHER

×20+1

BRACKET

×2

2 3 41

6 7 85

10 11 129

1413

ANTI-TIP CABLE

×1

LONG SCREW

×1

SHORT SCREW

×1

PLASTIC ANCHOR

×1

VERIFY THAT ALL PARTS ARE LISTED BEFORE BEGINNING Page 4

HARDWARE LIST

Anti-tip Hardware

TOOLS NEEDED

FOR ASSEMBLY

(NOT PROVIDED)

1. Screw the cam bolt into the predrilled panel. The cam bolt should be tightened

so no threads are visible.

2. The larger ring of the cam should touch the panel.

3. Insert the cam lock into the predrilled hole in the panel. Arrow faces the

outside of the panel.

4. Connect the previously tightened cam bolt with the panel connected into the

cam lock.

5. Using a flat head screw driver, turn the cam lock halfway clockwise to secure

the cam bolt.

6. FAILURE TO PROPERLY SECURE THE CAM LOCK AND CAM BOLT COULD RESULT

IN PRODUCT INSTABALITY AND FAILURE.

Page 5

CAM FASTEN SYSTEM EXAMPLE

Please call for replacement parts or assistance: 1-888-568-3818

Young Chain Company Limited

RING SHOULD

TOUCH THE BOARD

1 2 3

45 6

Page 6

11. Align the SIDE METAL FRAME ( F ) with the CROSS BAR ( G ) and then insert

the SIDE METAL FRAME ( F ) into the CROSS BAR ( G ).

2. And then use the ALLEN WRENCH ( 10 ) to secure the FLAT WASHER ( 13 ),

SPRING WASHER ( 12 ) and SHORT BOLT ( 11 ) to attach the SIDE METAL FRAME

( F ) with the CROSS BAR ( G ). Tighten the SHORT BOLT ( 11 ).

Please call for replacement parts or assistance: 1-888-568-3818

Young Chain Company Limited

ALLEN WRENCH

×1

SHORT BOLT

×8

SPRING WASHER

×8

FLAT WASHER

×8

10 11 12 13

ASSEMBLY

Page 7

21. Align the pre-assembled metal feet to the corresponding hole of the BASE ( B ).

2. And then use the ALLEN WRENCH ( 10 ) to secure the FLAT WASHER ( 13 ),

SPRING WASHER ( 12 ) and LONG BOLT ( 14 ) to attach the SIDE METAL FRAME

( F ) and CROSS BAR ( G ) to the BASE ( B ). Tighten the LONG BOLT ( 14 ).

** Note: Use the adjustable levelers to level the Industrial 4 drawer dresser if needed.

ASSEMBLY

Please call for replacement parts or assistance: 1-888-568-3818

Young Chain Company Limited

ALLEN WRENCH

×1

SPRING WASHER

×12

FLAT WASHER

×12

10 12 13

LONG BOLT

×12

31. Turn over the BASE ( B ) like the figure shown below.

2. Insert the CAM BOLT ( 1 ) into the corresponding hole of the BASE ( B ). And use a

hand screwdriver to tighten the CAM BOLT ( 1 ) clockwise.

ASSEMBLY

Page 8

Please call for replacement parts or assistance: 1-888-568-3818

Young Chain Company Limited

CAM BOLT

×8

41. Place the TOP ( A ) face down on a smooth soft surface. The side with the holes

should be facing up.

2. Insert the CAM BOLT ( 1 ) into the corresponding hole of the Top ( A ). And use a

hand screwdriver to tighten the CAM BOLT ( 1 ) clockwise.

ASSEMBLY

Page 9

Please call for replacement parts or assistance: 1-888-568-3818

Young Chain Company Limited

CAM BOLT

×8

51. Place the SIDE PANEL ( C ) face down on a smooth soft surface. The side with

the holes and glides should be facing up.

2. Insert the CAM BOLT ( 1 ) into the corresponding hole of the SIDE PANEL ( C ).

And use a hand screwdriver to tighten the CAM BOLT ( 1 ) clockwise.

** Repeat these same steps for another SIDE PANEL ( C ).

ASSEMBLY

Page 10

Please call for replacement parts or assistance: 1-888-568-3818

Young Chain Company Limited

CAM BOLT

×10

Inhaltsverzeichnis

Sprachen:

Andere Mainstays Inneneinrichtung Handbücher

Mainstays

Mainstays MS55-018-039-23 Bedienungsanleitung

Mainstays

Mainstays Albany MS16-301-001-12 Bedienungsanleitung

Mainstays

Mainstays 9409WWWM Bedienungsanleitung

Mainstays

Mainstays ADIRONDACK TM024252W Bedienungsanleitung

Mainstays

Mainstays MS16-D4-1007-11 Bedienungsanleitung

Mainstays

Mainstays MSS129900298080 Bedienungsanleitung

Mainstays

Mainstays MS1036174116001 Bedienungsanleitung

Mainstays

Mainstays 4061019WE Bedienungsanleitung

Mainstays

Mainstays MS89-010-092-40 Bedienungsanleitung

Mainstays

Mainstays Entertainment Center Bedienungsanleitung

Mainstays

Mainstays MARLOWE BH38-084-099-23 Bedienungsanleitung

Mainstays

Mainstays TM240302 Bedienungsanleitung

Mainstays

Mainstays MSS129900298079 Bedienungsanleitung

Mainstays

Mainstays MSW-10003 Bedienungsanleitung

Mainstays

Mainstays GORDON MS18-D1-1007-46 Bedienungsanleitung

Mainstays

Mainstays CONRAD MS17-D4-1007-01 Bedienungsanleitung

Mainstays

Mainstays MS18-D2-1011-02 Bedienungsanleitung

Mainstays

Mainstays MS17-D4-1007-10 Bedienungsanleitung

Mainstays

Mainstays BUCHANNAN Bedienungsanleitung

Mainstays

Mainstays CONRAD MS16-D4-1007-04 Bedienungsanleitung

Mainstays

Mainstays Side Storage Desk Bedienungsanleitung

Mainstays

Mainstays BENNETT MS18-D1-1007-13 Bedienungsanleitung

Mainstays

Mainstays 4059019WE Bedienungsanleitung

Mainstays

Mainstays FAUX MARBLE D2118.0028-MP Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung