Maiwe MIEN1203 Bedienungsanleitung

MIEN1203/MIEN2205

Industrial Ethernet Switch

User Manual

(Edition: V3.0)

Wuhan Maiwe Communication Co., Ltd.

MIEN1203/MIEN2205 Industrial Ethernet Switch

Trademark

This trademark is owned by Wuhan Maiwe

Communication Co., Ltd.

Mwring is the trademark used for link redundancy and self-recovery

technology, owned by Wuhan Maiwe Communication Co., Ltd.

Microsoft and Windows is registered trademark owned by Microsoft.

Clarification

The user manual is applicable to MIEN1203/MIEN2205 industrial ethernet

switch.

Please read the following license agreement carefully before using this manual.

The products described in this manual can be used only if you agree on the

following license agreement.

Important Statement

Any information provided by our company in this manual does not represent for

corresponding authorization on these information.

Our company attempts to ensure the accuracy and applicability for the

information provided in this manual, however our company does not assume

any responsibility for the use of these information, and does not assume any

joint responsibility for the use of these information. There may be a few

technical or typographical errors in the product and manual. The company

reserves the right to change all or part of this manual without prior notice.

Statement

Due to continuous update and improvement of products and

technology, the contents of this document may not be completely

consistent with the actual products, appreciate for your understanding.

If necessary to inquiry the updates of the product, please check our

official website or contact our representative directly.

MIEN1203/MIEN2205 Industrial Ethernet Switch

Safe Use Instruction

This product performance is excellent and reliable in the designed range of use,

but it’s necessary to avoid man-made damage or destroy for the

equipment.

Read the manual carefully and keep this manual for reference if need

afterwards.

Do not put the device close to the water sources or damp places.

Do not put anything on the power cable, it should be placed out of reach.

To avoid causing fire, do not knot or wrap the cable.

Power connector and other device connectors should be firmly

connected with each other, frequently inspection is needed.

Please keep the fiber socket and plug clean. Do not look directly at the

fiber section when the equipment is working.

Please keep the equipment clean and wipe it with a soft cotton cloth if

necessary.

Please do not repair the equipment by yourself, unless there is clear

instructions in the manual.

Under the following circumstances, please cut off power immediately and

Equipment water damage.

The equipment is broken or the casing is broken.

The equipment works abnormally or the performance has completely

changed.

The equipment produces odor, smoke or noise.

Statement: Information requiring explanation in use of the managed software.

Attention: Matters requiring specific attention in the use of the managed

software.

MIEN1203/MIEN2205 Industrial Ethernet Switch

III

Catalogue

1. Product Description.................................................. - 1 -

1.1. Product introduction.................................................................... - 1 -

1.2. System characteristics................................................................- 1 -

1.2.1. High-performance Ethernet switching interface.............................- 1 -

1.2.2. Industrial grade power supply design..............................................- 1 -

1.2.3. Robust appearance design...............................................................- 1 -

1.3. Packing list.................................................................................... - 1 -

2. Hardware structure................................................. - 3 -

2.1. Case................................................................................................- 3 -

2.2. MIEN1203 front panel.................................................................- 3 -

2.3. MIEN2205 front panel.................................................................- 3 -

2.4. MIEN2205-S/M front panel........................................................ - 4 -

2.5. LED indicator................................................................................ - 4 -

2.6. Power input terminal................................................................... - 5 -

3. Hardware installation............................................. - 6 -

3.1. Din-rail installation....................................................................... - 6 -

3.2. Cable connection......................................................................... - 6 -

3.3. Fiber optic connection.................................................................- 7 -

4. Appendix...................................................................... - 8 -

4.1. Technical index............................................................................. - 8 -

4.2. Product model...............................................................................- 9 -

MIEN1203/MIEN2205 Industrial Ethernet Switch

- 1 -

1. Product Description

1.1. Product introduction

MIEN1203-S/M is a 2 Tx ports 10M/100M adaptive high-performance

industrial-grade media converter, with 1 100Base-FX fiber interface, which is

used for optical fiber remote transmission of Ethernet signals.

MIEN2205 is a 5 Tx port 10M/100M adaptive high-performance industrial

Ethernet switch.

MIEN2205-S/M is a 100Base-FX optical fiber interface and 4 Tx ports

10M/100M adaptive high-performance industrial Ethernet switch.

Both MIEN1203 and MIEN2205 series provide industrial rail-mounted

installation. Each RJ45 port has an adaptive function, can automatically

configure to 10Base-T or 100Base-TX state and full-duplex or half-duplex

operation mode, and can automatically connect to MDI/MDI-X.

1.2. System characteristics

1.2.1. High-performance Ethernet switching interface

10Base-T/100Base-TX adaptive Ethernet interface (full duplex, half

duplex), support automatic MDI/MDI-X connection.

MIEN1203/MIEN2205-S/M has 100Base-FX full duplex.

6KV lightning protection standard.

1.2.2. Industrial grade power supply design

Provide industrial-grade DC power supply DC12~48V input. (DC48V,

AC/DC220V power supply is optional).

The power supply has reliable overcurrent and EMC protection.

Differential mode ±2KV, reliable surge protection.

1.2.3. Robust appearance design

Single-ribbed aluminum chassis heat dissipation surface design, no fan

for efficient heat dissipation, the system can work reliably in the environment of

-40°C~+85°C.

The high-strength enclosed aluminum housing enables the system to

work reliably in harsh and dangerous industrial environments.

Provide DIN rail installation.

1.3. Packing list

The MIEN1203/MIEN2205 series packaging contains the following items.

If any of the following items is lost or destroyed, please contact the agent or the

customer service center of Wuhan Maiwe Communication Co., Ltd., and they

will assist you in replacing or supplementing.

MIEN1203/MIEN2205 Industrial Ethernet Switch

- 2 -

Item

QTY

MIEN1203/MIEN2205

User manual

Product Certificate and Warranty Card

MIEN1203/MIEN2205 Industrial Ethernet Switch

- 3 -

2. Hardware structure

2.1. Case

The MIEN1203/MIEN2205 series chassis is a small DIN rail structure. The

whole machine adopts six-sided fully enclosed structure. Its overall dimensions

(not including DIN rail dimensions) are: 118mm×35mm×86mm

(height×width×depth).

2.2. MIEN1203 front panel

The front panel of MIEN1203 integrates one optical fiber interface and two

10Base-T/100Base-TX Ethernet RJ45 ports.

Port 3 is an optical fiber interface, TX is optical transmission, and RX is

optical reception.

2.3. MIEN2205 front panel

The front panel of MIEN2205 integrates 5 10Base-T/100Base-TX Ethernet

RJ45 ports.

MIEN1203/MIEN2205 Industrial Ethernet Switch

- 4 -

2.4. MIEN2205-S/M front panel

The front panel of MIEN2205-S/M integrates 1 optical fiber interface and 4

10Base-T/100Base-TX Ethernet RJ45 ports.

On the left is the fiber interface, TX is optical transmission, and RX is

optical reception.

2.5. LED indicator

The LED indicator on the front panel of MIEN1203/ MIEN2205/

MIEN2205-S/M can display the system operation and port status, which is

convenient for finding and solving the fault.

LED

Condition

Status

System status LED

PWR1

Power supply 1 is connected and operating

normally

Off

The power supply is not connected or operating

abnormally

PWR2

Power supply 2 is connected and operating

normally

Off

The power supply is not connected or operating

abnormally

Fiber port status LED

L/A

Port has established a valid network connection

Shiny

Port has network activity

MIEN1203/MIEN2205 Industrial Ethernet Switch

- 5 -

Off

The port has not established a valid network

connection

Ethernet RJ45 port status LE

Each Ethernet RJ45 port has two indicator lights, the yellow light is the port

speed indicator, and the green light is the port connection status indicator.

100M

(yellow light)

100M working status (namely 100Base-TX)

Off

10M working status (ie 10Base-T)

L/A

(green light)

Port has established a valid network connection

Shiny

Port has network activity

Off

The port has not established a valid network

connection

2.6. Power input terminal

MIEN1203/ MIEN2205/ MIEN2205-S/M use DC12~48V power supply or

DC48V. Use 5.08mm pitch 5-wire terminal to connect the power input. The

diameter of the power cord is less than 1.5mm. If using AC220V power supply,

connect V1+ to live wire L, and V1- to neutral wire N, and pay attention to

safety to prevent electric shock.

MIEN1203/MIEN2205 Industrial Ethernet Switch

- 6 -

3. Hardware installation

3.1. Din-rail installation

For most industrial applications, 35mm standard DIN rail installation is

very convenient. When you take out the device from the packing box, the rear

panel of MIEN1203/MIEN2205/MIE N2205-S/M should have a fixed DIN rail

connector. If the device needs to be clamped on the DIN rail, the installation of

the DIN rail should be checked before installation. It mainly includes the

following 2 items:

Whether the DIN rail is firmly fixed, whether other equipment is installed

on the DIN rail, and whether there is enough space for installing

MIEN1203/MIEN2205/MIEN2205-S/M.

Is there a power supply suitable for MIEN1203/ MIEN2205/

MIEN2205-S/M on the rail?

After selecting the installation location of MIEN1203/ MIEN2205/

MIEN2205-S/M, follow the steps below to install MIEN1203/ MIEN2205/

MIEN2205-S/M on the DIN rail:

Insert the upper part of the card rail into the card slot on the upper part of

the card rail connecting seat. Push down slightly on the upper panel of

MIEN1203/MIEN2205/MIEN2205-S/M and turn the device as shown in Figure

A below.

As shown in Figure B below, insert the DIN rail into the DIN rail

connector to confirm that the MIEN1203/MIEN2205/ MIEN2205-S/M device is

reliably installed on the rail.

3.2. Cable connection

After MIEN1203/ MIEN2205/ MIEN2205-S/M is correctly installed, the

cables can be installed and connected, including the cable connections of the

following interfaces.

Operation interface

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Maiwe Schalten Handbücher

Maiwe

Maiwe MIEN2206 Bedienungsanleitung

Maiwe

Maiwe MIEN2208 Series Bedienungsanleitung

Maiwe

Maiwe MISCOM7028GX Series Bedienungsanleitung

Maiwe

Maiwe MIGE2206G-2GF-4GT Bedienungsanleitung

Maiwe

Maiwe MISCOM8028-4GF Bedienungsanleitung

Maiwe

Maiwe MIGE2210 Series Bedienungsanleitung

Maiwe

Maiwe MIEN2205 Bedienungsanleitung

Maiwe

Maiwe MISCOM8028GX-4XGF-16GF-8GC Bedienungsanleitung

Maiwe

Maiwe MIEN3020G-4GC-16GT Bedienungsanleitung

Maiwe

Maiwe Admas2208P-M12-8TPOE Bedienungsanleitung

Maiwe

Maiwe MIEN2205 Bedienungsanleitung

Maiwe

Maiwe MIEN2016 Bedienungsanleitung

Maiwe

Maiwe MIEN2208-F Bedienungsanleitung

Maiwe

Maiwe MIEN3024 Bedienungsanleitung

Maiwe

Maiwe MISCOM8220G Bedienungsanleitung

Maiwe

Maiwe MIEN2205 Bedienungsanleitung

Maiwe

Maiwe MISCOM7220G-4GF-16GT Bedienungsanleitung

Maiwe

Maiwe MISCOM7212GP Series Bedienungsanleitung

Maiwe

Maiwe MIEN2204 Series Bedienungsanleitung

Maiwe

Maiwe MIEN2216 Bedienungsanleitung

Maiwe

Maiwe MIEN5208 Series Bedienungsanleitung

Maiwe

Maiwe MIGE3028-4GF Bedienungsanleitung

Maiwe

Maiwe MIEN2208 Series Bedienungsanleitung

Maiwe

Maiwe MIEN6208 Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung