Makita DC36RA Handbuch

Continuous Rating (W)

Voltage (V) Cycle (Hz) Input Output Max. Output(W)

100-240

DC36

DC9.0

YesDouble insulation

2.0 (6.6)

1.7 (3.7)

110-120

50/60

420

Models No.

Description

PRODUCT

Current (A)

ECHNICAL INFORMATION

CONCEPT AND MAIN APPLICATIONS

Specification

Optional accessories

P 1/ 5

DC36RA

Charger

Dimensions: mm (")

Width (W)

Height (H)

Length (L) 180 (7-1/8)

235 (9-1/4)

106 (4-3/16)

220-240 50/60 420

Power supply cord: m (ft)

Net weight: kg (lbs)

Output voltage: V

Output current: A

22 minutes to charge battery BL3626

Li-ion

2.6Capacity: Ah

Voltage: V

Charging time (approx.)*

Cell

*The charging time depends to a large extent on battery's temperature or room temperature.

DC36RA has been developed specially for charging 36V/2.6Ah

Li-ion battery Model BL3626.

Its brief benefits are:

1) Only 22 minutes to fully charge battery BL3626

2) Innovative computer controlled charging system provides

optimum charge to each battery through the digital communication

between charger and battery.

3) Cooling fan to keep the battery temperature low

for minimum charging time

*Cannot use the following adapters:

ADP02 (Refreshing Adapter), ADP03 (Automatic Refreshing Adapter),

ADP01/ ADP04 (Interchangeable Adapter)

*Cannot charge 7.2V-24V batteries.

P 2/ 5

Repair

CAUTION: Repair the machine in accordance with “Instruction manual” or “Safety instructions”.

DISASSEMBLING

Cap 13 (4pcs.)

(1) Turn Charger upside down and remove four Caps 13 and Tapping screws. (Fig.1)

Note: Do not lose Cap 13.

Charger case complete

Charger case cover

Tapping screw

(4pcs.)

(2) Remove charger case complete from charger case cover (Fig. 2).

Fig. 1

Fig. 2

[1] DISASSEMBLY/ASSEMBLY

[1]-1. Charger case

Charger case cover

[1]-2. Terminal unit, Charging circuit

DISASSEMBLING

(1) Disconnect Connector CN202 and remove Lead wires (blue and brown) from Charging circuit with Soldering iron.

(Fig. 3).

(2) Remove Terminal unit from Terminal base (Fig. 4).

Fig. 3 Fig. 4

Charging circuit

Terminal unit

Lead wire (brown)

Lead wire (blue)

Connector CN203

Conector CN202

(Enlarged fig.)

Terminal unit

Terminal base

Compression spring 4

(233194-8)

P 3/ 5

Repair

(1) Install Lead wires as described. (Fig. 5 and 6)

(2) Take the reverse step of Figs. 3 and 4.

Fig. 5 Fig. 6

ASSEMBLING

2. Locate Lead wires in the

described place.

Note: Do not pinch them

with ribs.

4. Band Lead wires with

Clip.

1. Route Lead wires between ribs.

Note: Do not pinch them with ribs.

Rib on Charger case

3. Fix Connectors CN202

and CN203 securely.

Route Lead wires

in the described position.

Charging

circuit

P 4/ 5

[1]-3 Terminal Cover

Unscrew Flange BT3x10 tapping screw and remove Terminal cover (Fig.7).

Fig.7

Remove Tapping screw from inside of Charger case complete and

dismantle Terminal cover as securing two Compression spring 4.

Flange BT3x10 tapping screw

DISASSEMBLING

ASSEMBLING

Place two Compression spring 4 into Terminal cover and fix them to Charger case complete by tightening Flange BT3x10

Tapping screw to 0.5 N.m (Fig. 8).

Note: Compression spring 4 (231474-6) in Terminal cover is not interchangeable with Compression spring 4

(233194-8) under Terminal unit.

Fig.8

1. Place two Compression spring 4 into

Terminal cover as described below.

Compression spring 4 (231474-6)

Terminal cover

Charger case complete

Compression spring 4

2. Fix Terminal cover by inserting its boss

into oval slot on Charger case complete.

Oval slot

Boss

Charger case complete

Repair

[1]-4 Varistor, Fuse

DISASSEMBLING/ ASSEMBLING

Fig. 9

Varistor is damaged due to excessive voltage approx. two times more than acceptable input rating and

it can be replaced by the Varistor with vinyl tube for replacement (647306-1). (Fig. 9)

Replace entire Charging circuit in case the Fuse is cut although the Varistor is intact,

as it is not due to the Varistor failure .

Varistor Varistor with vinyl tube

for replacement (647306-1)

Fuse (652786-8)

Varistor (647306-1)

Fuse and Varistor can be replaced

by soldering.

P 5/ 5

Repair

Andere Handbücher für DC36RA

Inhaltsverzeichnis

Andere Makita Akkuladegerät Handbücher

Makita

Makita DC4001 Bedienungsanleitung

Makita

Makita DC1413 Handbuch

Makita

Makita DMR300 Bedienungsanleitung

Makita

Makita DC18RC Bedienungsanleitung

Makita

Makita DC1822 Bedienungsanleitung

Makita

Makita DC1804 (MJ) Handbuch

Makita

Makita DC18RD Bedienungsanleitung

Makita

Makita DC1414 (MJ) Bedienungsanleitung

Makita

Makita DC18RD Bedienungsanleitung

Makita

Makita DC24WA Bedienungsanleitung

Makita

Makita DC18RD Bedienungsanleitung

Makita

Makita DC10WB Bedienungsanleitung

Makita

Makita DC40RB Bedienungsanleitung

Makita

Makita DC18SE Bedienungsanleitung

Makita

Makita MAKSTAR DC18RA Bedienungsanleitung

Makita

Makita DMR300 Bedienungsanleitung

Makita

Makita DC64WA Bedienungsanleitung

Makita

Makita DC07SA Bedienungsanleitung

Makita

Makita MAKSTAR DC18RA Bedienungsanleitung

Makita

Makita DC18SF Bedienungsanleitung

Makita

Makita MAKSTAR DC18RA Handbuch

Makita

Makita DC10SA Bedienungsanleitung

Makita

Makita DC1804 (MJ) Bedienungsanleitung

Makita

Makita DC18WA Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung